INONIE (Enone, Aenone) > India

Enone

INONIE (ENONE, AENONE) > INDIA

I have had a request for information on the wee ship Inonie, seen above. Firstly, some background, Inonie was built by Robert H. Shakespear in Auckland in the early 1900’s. He built her in his stable loft, after hours, mostly by candle light. The carving on the bow was done by his wife, Elsie.

When complete the Shakespear’s used Enone to get to & from Little Barrier Island, & also to transport produce and farming goods between Little Barrier, Tiri & Auckland.

At some stage her name was changed to India.

These days she is owned by Rick Osborne who lives in Renwick, near Blenheim, in the Marlborough region, & possibly has been re-powered with a steam engine. I’m sure Russell Ward will be able to confirm this & even maybe supply a photo.

She was also owned at some stage of her life (perhaps a long time?) by Grant Tylden who was Robert Shakespear’s nephew (on his wifes side).

So woodys – can we flush out more info on Enone’s past?, particularly mid > old life.

(Photo credits & details – J Russell via the Hocken Collection, University of Otago and Nathan Herbert)

Now Robert Shakespear had a great eye & pair of hands – the clinker below, Maire, he built at Little Barrier Island.

Maire

Input from Russell Ward

I first came across (I’m sure it wasn’t Enone. Ionone? Maybe Inone?) when Neil Cox -an electrician at Ngunguru had not long bought her from Jim Francis (Lady Margaret). He also got what was reputed to be her original engine -or at least an early one- a single cylinder Zealandia. Hoyland and Gillett made a lot of them from their works at the bottom of Stanley Street -just opposite the pub. They ceased production around WW1 and Gillett took up selling cars while Chas Hoyland went to live and make boats at Clarks Beach on the Kaipara. He was quite a racer at their regattas around WW1 and is worth an article in himself HAROLD!

But I digress.

Neil was obsessed with making her into a steamer -he probably got infected like many others by my 17′ steamer Gypsy. He made up a 4″ x 3″ O B Bolton design single cylinder engine from patterns sold by Winters in NSW. He also had made a fine coal fired, vertical fire tube boiler to Stuart design updated to pass NZ Marine Dept specs. Same as I have in Romany -I paid him a portion of the design and certification fees for the rights to use the design.

I didn’t think that Neil got a lot of joy out of her and I don’t recall him using her much. Captain Percy Ginders would confirm. A lot of his problems were that he had a grate or thick steep plate in the firebox that was perforated by well spaced 3/4″ holes. It was insufficient to let enough air through to get a good fire going, but Neil was selling up and off.

I bought the Zealandia from him about the time I launched Romany and Neil -departing for Oz- sold off Ionone to an antique dealer at Sanson (I think) late ’90s.

I didn’t see much of her until she appeared at one of the early Lake Rotoiti (St Arnauds) events. She was called India by then but again, she didn’t see to be steaming.

Rick Osborne bought her a few years back and at last she has a worthy enthusiastic owner. He has done her the honours and has also ditched the Bolton engine for a twin cylinder engine that will be much easier to live with.

Input from Harold Kidd

Neil Cox was a good auto-electrician and a member of the Vintage Car Club with Jim Francis, vintagesteamer and yrs truly. I visited him in 1990 when he moved up to Ngunguru to discuss the rewinding of a magneto. Even then such people were becoming thin on the ground. I was very taken by this craft (and more by the Zealandia than the steam plant, with which things were not going well).

Her name was spelt INONIE. When I knew him, Bob Shakespear had a garage at Gills Road Albany where he had a collection of interesting cars including a Stutz Straight 8. He sold INONIE to Jim Francis about 1960 when she had an Australian Simplex engine. In fact, her first engine was a 3hp Kapai, not a Zealandia, and she was first launched in March 1910.

The inter-related Hobbs/Shakespear famiilies had used her at Whangaparaoa to take produce out to their Logan keel yacht FRANCES to take to Auckland markets.

Shakespear worked for the Logan Bros and was involved in ILEX and built FRANCES at Logans’ yard as a close twin to VICTORY. He also built the clinker keeler PANDORA to service his little farm on Little Barrier where he was custodian for a while….big story.

Further Input From Russell Ward – photo below of India at Lake Rotoiti (Sth Is.) 2011. Also photo of the wee Zealandia engine that Jim Francis said was in her when new.

Unknown-1

Unknown-2

 

 

 

 

We Love Long Weekends

Unknown-1

We Love Long Weekends

In the photo above (ex Baden Pascoe) we see members of the Auckland Power Boat Association enjoying the 1st picnic of the season at Takapuna. Hopefully a lot of you will be out & about this weekend enjoying the spring weather & giving the boat a treat.

MY GIRL UPDATE

One person who will not be afloat will be Jason Prew, life for Jas at the moment is centered on the rebuild of his classic launch My Girl. Search the name in the WW search box to see details.

Jason has a great blog recording the work being done – link below. Check out the scale of this project!

http://www.my-girl.co.nz/mygirl/Restoration/Restoration.html

Big WW story tomorrow – lots of photos (a tease below) & if you or anyone you know is looking for a classic wooden launch that requires nothing done to her – you have to read Mondays story 😉

IMG_8742

 

MV CLEMATIS – An ideal floating bach

profile

birthday cruise 019

Unknown-6

Unknown-3

Screen Shot 2017-10-18 at 4.27.23 pm

MV CLEMATIS – An ideal floating bach

WW readers will be familiar with my views on how compared to the price of waterfront property these days, you can buy a classic wooden vessel for a fraction of the cost, that offers the same benefits + more.

Clematis at 45’ is one such vessel, launched in 1939 & built of kauri by Miller and Tonnage Ship Builders in Port Chalmers for J. Falconer & Sons of Timaru.

Her past has seen her serve with the New Zealand Maritime Department, initially in the NZ Navy during WWII & with the various other ad hoc parties until 1995. She was the only vessel still attached to the navy, serving from WWII until c.1995. She was seconded to the US Navy during WWII & during this period she was refitted on three occasions and even given a copper bottom by the Americans for her use in the Pacific Islands. She was later a training boat for the Maritime Department and Ministry of Fisheries.

She was eventually sold to Christchurch businessman, Bryan Mullaly, in 1995, who based her in Picton. Later use saw her working for a time in Lyttleton as a whale watch boat. Back then (c.1995) she was powered by an Isuzu truck / bus engine, converted to marine use, this replaced a Gardner diesel.

Mullaly sold her to her present owner, Pam Holt in 2003 & Pam brought her up to Coromandel & Gt. Barrier, where Clematis became her floating home. Her large saloon, galley, 2 cabins and spacious covered deck made her ideal for enjoying the spectacular scenery and sea life.

With lots of blue ocean miles under her belt, Clematis is a proven seaworthy boat. Having been in MSA survey (expired) for 18 passengers, 10 to Great Barrier Island.

Pam’s days afloat are over & she is looking for a new custodian for Clematis, whether as a floating bach or a fabulous event venue or for sightseeing cruises.

You will see in the photos that she has recently had a lot of TCL applied & is now offered for sale. Interested parties can contact Pam direct at pamclem@hotmail.com

B/W photos below from launch day.

Screen Shot 2017-10-18 at 4.24.13 pm

Screen Shot 2017-10-18 at 4.24.41 pm

Input from Russell Ward

Below are two photos, the colour one is a shot of her on Otago Harbour set to Russell by Ian Mclean –she spent a lot of time in Dunedin –Sea Cadets boat.

The b/w photo shows Clematis on the right in working rig. To her starboard is Aorangi’s bow, Shenendoah and over astern a smattering of the pride of the Auckland fleet. Centre stage, wearing her original funnel in pride is Melodeon.

This pic would be in the ’50s or early ‘60s. A view of the viaduct before it became a eating and watering and posh boat hole 🙂

Unknown

Unknown-1

Input from Peter Marshall

Actually, Brian Mullaly sold CLEMATIS to me around ’95 and I took her to Lyttelton. She was put into survey as a commercial boat in 2001 but was almost immediately involved in the destruction of the marina at Magazine Bay and was out for the 2001-2002 summer season.
Expertly and comprehensively repaired by Stark Bros., CLEMATIS then operated as Godley Head Dolphin Company watch out of Dampier Bay and around the Banks Peninsula until ’95 when I gave up the cause of making Lyttelton a reasonable environment for chartering and she was bought by a young woodworker from Auckland.
As an added note, she was lent to the Yanks during WW II, who took her up into the Pacific and clad her hull in copper to protect her from worm and used her as shallow water picket duty. The Navy League had her on Otago Harbour for around 30 years, and scads of harbour-dwellers knew the sound of her old Gardner.

Aries

Screen Shot 2017-10-18 at 3.13.01 pm

Screen Shot 2017-10-18 at 3.12.50 pm

ARIES

Aries was built by Owen Woolley in 1957 for Max Burrett. Peter Walsh, who owned her for 2>3 years c.1982, watched Woolley building her. Her original engines were twin ex-USN 6 cylinder Chrysler Crowns of 1943 vintage. These were later replaced, with twin Commer diesels, when Ed Carter bought her c.1967.

The photos above were taken during Peter Walsh’s ownership c.1982. The photos were sent to me by Allan Keane who commented that Aries was in a sorry state when Peter Walsh purchased her, she had a leaky Commer 105hp engine and very bad bilges.

Peter did a substantial refit at his yard in Onehunga & repowered with twin 135hp Commers, which gave her an impressive 14-15 knots.

Peter sold her to a farmer up in the Bay of Islands and says he shed a tear when she sold – he really loved and admired her.

The photos are at Connells Bay wharf, McMullen and Wings marina, and at Peter Walsh’s yard Onehunga.

Thanks to Harold Kidd & Russell Ward for details on her past ownership & means of propulsion.

Any woodys able to supply more info on her past?

View 2015 photo of Aries in previous WW post   https://waitematawoodys.com/2017/08/25/aries/

MORE DETAILS AT THIS WW LINK https://waitematawoodys.com/2023/10/22/aries-4/

Jack

jack-beach

 

capebrett02

JACK

The clinker Jack belongs to woody Dean Wright, they got Jack from Picton back in 2008, a 8’6″ kauri clinker. From what Dean has learnt she was probably built by the Jack Morgan yard in the 1960’s. If anyone recognises Jack and has any more history, he would love to hear it.

 The story of Jack as told by Dean

He’s always been a leaker despite long spells in the briny to take up. You’ll see from the photos 3-4″ of water sloshing about and the bailer afloat, we decided that 2016 was going to be his birthday and he was going to get tight.

We stripped him back to bare, cleaned out the lands then took him to boat builder Bob Van Pierce (owner of the mullety Cora) for his opinion.  He thought she was recoverable but she’d need three and a bit new planks and a general refasten. And while we were at he’d fix the bulge in one side of her hull and bring her back into her original shape. Bob did all the smart stuff and I got on the end of the dolly. Thanks Bob, you did a fantastic job.

The first photos show the general condition of the planks we replaced, splits and bits missing.

A few replacement planks & Bob scarfed one in. Spotted gum for the ribs. The steam box was cranked up, ribs loaded in & then bent in. A few broke but where were spares. Ribs were nailed from below and riveted.

Then primer, Prekote and topcoat prior to new purple heart thwarts being fitted. Bob also added rubbing strakes.

Then Jack came back home to your the shed and was ready for bottom paint & signwriting by artist Lester Hall. Thanks also Lester for the beautiful oars complete with welcome swallows. These have been decorating my wall for the last 5-6 years, they got a hell of a fright being immersed in salt water.

Then the bronze rowlocks were fitted & new floorboards in + nylon rub rail secured with copper wire. 

First outing was planting trees with Project Island Song. Over a day, we got half a litre in the bottom, pretty happy with that.

The old dinks – Ken is not happy, he’s been relegated to barge duties.

 

And While On The Topic Of Wooden Boats

The NZ Traditional Boat Building School has just released details on its latest courses, see below. The presenter / instructors are legends in the wooden boating community. In the past the courses have been oversubscribed, so get in early or miss out.

To register – email tanya@nztbs.org.nz       or call 027 – 45 33 55

Screen Shot 2017-10-13 at 2.38.34 pm

 

Petrel

Screen Shot 2017-10-09 at 3.27.32 pm

Screen Shot 2017-10-09 at 3.27.41 pm

Screen Shot 2017-10-09 at 3.27.49 pm

Screen Shot 2017-10-09 at 3.26.22 pm

PETREL
The posts last week on the Philip Lange built vessel Faith have resulted in Sharon Lange (Sharon, married Philip & Bev’s son, Ian Lange) sending in the above photos of ‘Petrel’, the last boat built by Philip. Petrel was build under Philip and Bev’s Mill Bay house in Mangonui and launched in 1991.

Petrel was build for Philips son Stev and is used as a commercial longline boat out of Mangonui to present day.

The photos, from the top, are tagged:
1: The Petrel on the cradle front lawn of Philips house
2: close up
3: Getting ready to go down the drive to Mill bay for launching
4: Philip lange on the Petrel during launching , Stev Lange on the ramp , Bev at the front and Ian lange ready to help and Phils grand daughter watching the action
5: Philip Lange and the Petrel
6: Bev Lange & the Petrel
7: the Petrel
8: speaks for its self

The New Zealand Clinker
In support of last weekends Classic Yacht & Launch Exhibition, the Tino Rawa Trust have produced a 36 page booklet titled ‘ The New Zealand Clinker, its a great collection of stories on & around clinker boats. I enjoyed the read & learnt a lot.
You can grab a copy for $20 from BoatBooks in Westhaven or try your luck with answering the question below, all correct entries, emailed to waitematawoodys@gmail.com before 6pm 10-10-2017, go into the draw for a copy.

Q: Where does the word ‘clinker’ originate from?

Clinker Cover

Clinker Spread

Input from Russell Ward

A glossary in the pre WW2 book Motor Cruising by Irvine and others confirms that “Clinker (clincher, clencher) is a method of building in which each side plank overlaps the one below.”
Now, shipmates, we gotta drill a bit deeper into this one, maybe. Clenching or clench nailing is the merry art of holding an iron or hammer just right and picking up the sharp end of your nail as she emerges through the other side and turning it over and back into the wood (provided the wood is soft enough). Quick and easy and, if done neatly looks a lot better than it sounds. I sent a picture via Wifi to AH just now -qv. Iona had a lot of old epaired timbers clinched and it looked good.
The Yanks of course call “clinker” by the more descriptive term “lapstrake”. So Robin Seaward in ‘Boatbuilding’ 2ed says “Lapstrake -sometimes called clinker planking.”
However, I find this appealing “Late 17th century (denoting a person or thing that clinks): from clink + -er. clinker”. Do you reckon that the wisened old man crouched over the wee boat in the corner of the shed was clinking away at his craft?
(Personally I like the old-fashioned slang use for a bum note played on a musical instrument -a clinker! Or in my favourite town Galway, a clinker is a wee lass worthy of a very close inspection. Or modern slang says a clinker is a dingle berry. Nothing to do with our boats though.) Better watch where you use the term.
Take yer pick, fellow anorak wearers…..

Unknown

FAITH – Flash Back Friday

Screen Shot 2017-10-05 at 10.48.30 am

Unknown-1

Screen Shot 2017-10-05 at 10.48.46 am

FAITH – Flash Back Friday

Last week I posted some ‘recent-ish’ photos of the Philip Lange built launch – Faith, now owned by Neal & Nicki Harding in the Marlborough Sounds. Yesterday I was contacted by Sharon Lange with the above photos from the launching & older days up north.

Sharon confirmed that Faith was built by Philip Lange in 1967 and launched in 1968 at Whangaparoa at Matakatia Bay. Philip installed a Kelvin motor in the Faith.

Philip worked the Faith as a commercial fishing boat out of Whangaparoa for a little while then left Whangaparoa, driving the Faith up with one of his young sons – Graham Lange , north to Mangonui , Doubtless Bay. From there he continued to fish for cray fish and longline on the Faith. Philip and his wife Bev and six sons moved to Mangonui where he continued to build other boats.

The Faith was sold to Philips brother Douglas then to Murray Hamilton (both deceased). Then sold to Vick Spaights, after that Sharon does not know any further history apart from the Hardings owning her now .

There are 4 of Philips boats moored permanently in Mill Bay Mangonui, they are: – 1. The Michele, 2. Kaipara, 3. Tui, 4. Petrel. The Petrel was the last boat built in 1991.

# The top photo was taken at the launching of the Faith with 4 of Philips young sons and one neighbor’s boy at Matakatia Bay on the Whangaparoa Peninsula.

# The middle photo was taken in Mangonui Harbour by the wharf heading toward Mill Bay mooring.

# The bottom photo shows Faith heading towards the Mangonui wharf.

SLAINTE Relaunched

Slainte

Slainte-2

SLAINTE Relaunched

Back in early August I posted photos / details on the restoration / rebuild of the 1947 27’ Chris Craft Super Delux – Slainte at Craig Maine at Lake Rotoiti (link below).

Yesterday Alan Craig sent me photos from last Friday’s relaunch on the lake. Alan’s a man of few words e.g. “ It floats, all went well” J

Slainte is a stunning addition to the Lake Rotoiti woody fleet – well done Alan & the brave owner that commissioned the project.

Slainte

 

A Beautiful Clinker

Vos Rockfort Skiff 2

Vos Rockfort Skiff

A Beautiful Clinker

Baden Pascoe sent the above two photos of the Rockfort skiff that Percy Vos built in 1926. Baden commented that it has the most attractive planking of any boat he has ever seen – big call 😉

These days it is owned by the Percy Vos Charitable Trust & resides at the, maybe one day it will be restored – Vos Shed.

The real reason for today’s post is to remind you all about this weekend’s Clinker Boat exhibition at the waterfront / viaduct – details below

The Vos clinker will be on show, so you can check out if Baden is right re the planking 🙂

Clinker Event Ad

 

 

 

Poaka

Screen Shot 2017-09-29 at 12.53.58 am

Screen Shot 2017-09-29 at 12.55.45 am

POAKA

Back in Feb 2015 I did a story on the 1960 Snow Waters built launch ‘Poaka’ & questioned where she was today. Nathan Herbert gave us a heads up in Feb 2017 that she had popped up on trademe & she is still there today.
Looks like she has had some TLC & being a Waters craft she should be a solid ship. Interesting the difference between the painted cabin, versus the ‘as launched’ varnished finish (photo below), certainly looks sharper with the varnish (in my eye)
Powered by a 72hp, 4 cyl. Ford Diesel.
A nice entry level woody that with a little more work, could be a pretty classic.
See / read more about her here https://waitematawoodys.com/2015/02/14/poaka/
Screen Shot 2017-09-29 at 12.56.03 am
Screen Shot 2017-09-25 at 1.17.59 pm
Yesterdays winner of the Auckland On The Water Boat Show tickets was – Tim Christensen – owner of the classic launch ‘Yvonne’