Bonito

BONITO

photo & info sourced by Ken Ricketts

Built in 1960 by Carl Augustin  for Dr Lindsay Brown of Auckland.

She is 34 ft long with 10ft 6 beam & was originally fitted with an 86 hp 6 cyl Ford Diesel with direct drive to a 14 x 14 propeller & cruising at about 14 knots & a top speed of 17 knots. In 1961 she was fitted with a 2 to 1 reduction gear driving a 20 x 27 propeller which took her to an economical cruising speed of 17 knots at 2 to 3 gallons of fuel per hour & top speed of 22 knots. – just shows the differences a reduction gear can make.

Any updates on her history, photos & present whereabouts would be appreciated.

Bonito

Bonito

Harold Kidd Update

I last saw BONITO in Mangonui in 1999 when she was owned by Jimmy Osborne who had owned her for nearly 20 years. After Dr. Lindsay Brown, who kept her until at least 1967, she was owned by P. Noakes of St. Stephens Ave in 1973.

Awana

Awana shed

AWANA
Awana is a Brin Wilson design, launched in 1967. She is 36′ with a beam of 11’4″ and powdered by a 120 h.p. Ford motor.
Her current owners Rachel McKinnon and Derek Molander purchased her in March 2014 from the estate of Neil Johnson in Whangarei. Johnson purchased her in July 2012 from Tauranga (seller unknown). Her new home is Pine Harbour.
Her new owners have already started work bringing her into prime condition, to date they have hauled her out and changed her cabin sides from a brown stain (owners words) to a light grey, at the same time all her were removed & re-sealed + anti-fouling.
Her new owners report Awana is a very sea worthy boat and are looking forward to a long future with her.
Like all owners they are interested in uncovering more of her past – anyone able to help?

 

Korara

KORARA

photos & details ex Nathan Herbert

CYA member Nathan Herbert who is currently restoring the Coultard launch Lucinda is seeking more info on his other classic, Korara, the 37′ motor sailer built c.1960 by Alan (Snow) Waters for Ron Gurr.

Korara’s design came from a UK designer John E. Powell, Nathan has supplied reference material on Mary Islay (magazine pages) ex the Jack Brooke collection. See below.

Specs: LOA = 37′, Beam = 10’6″, Draught = 3’9″, Disp = 10.5 ton, Sail Area = Mizzen 107sqft – Genoa 277sqft, Engine = 120hp Ford, Speed = 9.5knts

There are big gaps in her history that Nathan would like to fill in.

click any image to enlarge

Some proof below of the wide readership of waitematawoodys.

A message from Paul Mimmack in the Channel Islands

“I was checking out ‘John E Powell’ on Google when I came across the page on KORARA.
I was very interested in her details and pictures as I am the present owner of MARY ISLAY!   I purchased her in 1992, but over time, work (Asst Harbourmaster & Coastguard SMC in Jersey CI) has got in the way of using and looking after her as I would like. But I retired 3 weeks ago so will give her some TLC over the next few years, starting when the weather improves in spring.
It is interesting to compare her with KORARA, having less cabin space as she was built as a Motor Fishing Yacht for Sir Giles Guthrie – a banker & chairman of BOAC – in 1957 at Aeromarine Ltd, Emsworth, Hampshire. Originally moored at Hamble, near Southampton until he sold it in 1962/3. There is no accommodation astern of the wheelhouse – just the walk-in (via short ladder each side) engine room.  The afterdeck was left open for fishing and has RNLI lifeboat type bronze wash ports.
As the specification says – built mainly of teak on an oak keel, there is some electrolysis in the oak around the rudder tube, which I need to sort out.
In 2004 I changed the original 2 stroke Foden 70hp diesel for a rebuilt Gardner 4LW of 62hp. It fitted, is quieter, more economical and more importantly I can still get spare parts.
She is rather a ‘wet’ hull, thus the Kent clearview screens get used in over f3 head winds, but comfortable. Her 10ft beam seems very ‘narrow’ for a boat today (but typical of the time), the steadying sail helps stop rolling in beam seas.
 
[I do have NZ contacts as my wife is from Auckland, she still has a brother, sister, aunt & uncle in town, with other relations spread around the country – we hope to be out next December]
Kind Regards
Paul Mimmack
St Lawrence
JERSEY
JE3 1JR
Channel Islands”

Tainui

TAINUI

photo & details ex Murray Willis

It is believed that Tainui started life as a Auckland Harbour Board work boat. Built in 1967 by according to her owner someone or thing called ‘BOSS’ ?
Her construction is 1×1/2” Kauri plank Carvel. She is round bilge and 38 ft long.

Tainui is moored next to Murray’s launch Marguerite in Whangaparapara at Great Barrier Island where she has spent the last 10 years. The current owner purchased her from a bloke in Plimmerton and sailed her up the east coast to the Great Barrier Island.
More details on her past would be appreciated.

Due to poor health she is for sale but not listed nor advertised any where, if you are interested, contact Murray at jan.murray@xtra.co.nz

 

Kayla Rose – RIP

KAYLA ROSE – RIP

Kayla Rose, a SeaCraft,  is one of those boats that we look at & think – ‘ bugger these launches, I could handle the maintenance on one of those, no marina fees etc’. Truth is I’m sure the upkeep is similar.

I spotted KR at the recent Whangateau regatta & like several others there were instantly smitten.

Keen to learn more about her – possibly Pam at the WTB can enlighten us.

Update from John Sankey
Thank you for putting up the pics on your wonderful website!
A big thanks also to Pam and George for the fantastic weekend Regatta! The weather, wind and company was perfect!
This was the first time back in the tide for Kayla Rose after 2 years hibernating and getting some ‘beauty sleep’. As you can see, the bilge pump was working hard waiting for those planks to start to ‘take up’. She is 16′ and is circa 1962 in Kauri planked clinker with a double diagonal bottom. The engine is the original Ford Consul 4 cylinder by S.A.M. Marine, with a forward and reverse box. I bought her 3 years ago off a friend in Beach Haven who will know more of her history….

Cyvette

CYVETTE

details & photos ex Sea Spray April 1962 edition, supplied by Ken Ricketts

Built for Mr Doug Ellis of Northcote, by Dave Jackson, she is 30′ 6″ long, 9′ 6″ beam & draws approx 3′. She was built in a shed adjacent to the northern Harbour Bridge approaches, at that time, which was reported to have been quite historical & used by Bill Couldrey & before him Bob Brown, designer of the Z-Class, in days gone by.

She was originally powered by a 100hp Scripps marinised Ford V8 driving a 20×18,  five bladed propeller through a 2 to 1 reduction gear.

She is single skin full length Kauri with Tanekaha timbers deck beams & coamings with extra trim in Mahogany.  She sleeps 6.

In the photo above Mrs Ellis is pictured christening Cyvette..

Harold Kidd Update

Dave Jackson built CYVETTE to his 1957 design for LADY BEV which he built for himself and kept for many years. CYVETTE was later renamed BONAVENTURE.
Dave built a huge number of boats in the Sulphur Beach shed in which Bob Brown had built many craft before he drowned trying to save a child in the early 1930s Brown built a number of mullet boats, ARETHUSA and designed and built the first Zeddies. After his death, Bill Couldrey took over the yard and built all those great keel yachts and launches there. Dave Jackson took over the yard when he set up on his own after leaving Collings &  Bell. Mrs Brown still owned the site. Ernie Seager also operated his marine engineering business from the yard alongside Dave.

17-04-2016  Could Cyvette be Bon Voyage ?
photo & details ex Ken Ricketts

Bon Voyage is based at Gulf Harbour & is powered by an Iveco 6 cyl diesel & has been owned by Richard Barrington for a around a year. He bought her as Bon Voyage off Keith Williams & believes she was built around 1960 & could be originally have been Cyvette.

Keith Williams told Ken he had her from c.2000-2001 & sold her to Richard B. a little over a year ago & she was at Gulf Harbour when he bought her. She was called Bon Voyage & also had the  Iveco at that time he bought her. Keith can’t recall who he bought her off & thinks he bought her as result of a sign in the boats window. He recalls the previous owner was working in Albany at the time & thinks he may have lived in East Coast Bays.

Screen Shot 2016-04-17 at 7.59.51 PM

 

Boat Designer – Sonny Levi

Boat Designer – Sonny Levi

photos & details supplied by Ken Ricketts

Levi designed at least 3 launches for the NZ market (refer below)

Designer Bio (straight from his website)

Born in Karachi 85 years ago, Sonny Levi was at school in Cannes when the war broke out.
His father, an interior designer and manufacturer, and an enthusiastic motor yachtsman, moved into Government contract boatbuilding at a shipyard in Bombay. From this early age the young Renato (‘Sonny’ was bestowed by an ayah who could not manage the letter ‘r’) designed boats, inspired by the multitude of local craft in that seafront city.
He joined the RAF and trained in England, studied aircraft design and demobilisation and returned to Bombay, where by 1950 he was chief designer in his father’s busy drawing office. In 1960 he moved to Italy to work for Navaltecnica in Anzio. “I have been very fortunate to have clients who are prepared to take risks” he says today.

“I always tried to be as honest with them as I could when we discussed their projects. And occasionally something didn’t work. This is the problem with original design.”
But for every failure there were a great many ground-breaking successes, and it seems typical of the man to ascribe these to luck and pass on credit to his customers – even if they were signing the cheques.
But when you look at some of the projects he involved them in you begin to see what he means: so many of the designs were at the cutting edge of naval architecture, where success was by no means certain. Like an artist with wealthy patrons, whenever he had an idea for a new work he could usually find someone to pay for it.

Rich playboy powerboat racers would find themselves enthusiastically funding outlandish and dramatic experimental prototypes. Commercial boatyards would be talked into daring new engineering solution on the promise of more speed and efficiency. If Sonny Lei is a problem solver at heart, he is one who has never seemed inclined to solve the same problem twice.

The Levi Boats

#1 Resolute


Built in the mid/later 1950’s, originally 38 ft., she was lengthened somewhere along the way, probably in the 1990’s, to about 42 feet, originally with twin 4-53 GM Detroit Diesels, until a 2012, which were still going fine, but were replaced with 2 larger Yanmars. Resolute belonged to a friend of Ken Ricketts, Ray Bailey, for a period in the mid 70s & is now moored at Westpark Marina.

#2 Ikikai
Little is known about Ikikai, she was circa 40 feet & originally also had twin Detroits.

Both of these first 2 boats, were designs based on boats he designed & were built in numbers, for the Indian Police, as Police Boats, in their era.

#3 Bacardi


Launch date unknown but powered by twin 427 cubic inch ‘Interceptor’ GM V8 petrol engines, circa 400 hp each, these were replaced with 2 x GM Fuel Pincher 4 cycle V8 diesels circa 200 hp each. Barcardi was owned in the 1990’s by another of Ken Ricketts friends, Rick Brown.

All 3 boats were all built for Arthur Jenkinson, who was in the musical instrument business, in Auckland, by Percy Vos, & /or Shipbuilders.
Levi was very radical in his designs, for his day, virtually all his launches were designed as high speed, high performance boats, many of them having a reverse shear, & in the case of Ikikia & Resolute a slanting out tuck that v’ed to a central point in the middle.
Bacardi had a “cathedral” type bow, but she was very quick with those 2 “Interceptor” GM V8s.

 

Lady Ethel

LADY ETHEL

Built in 1963 by Brin Wilson.Designed by Billy Rodgers and is what the owner calls a classic ‘Sounds’ launch.
At 34ft and built of triple diagonal kauri planked.
Powered by a 72 hp Mercedes 4 cylinder diesel engine, she will cruise at a comfortable 7-8 knots.
Currently residing in Motueka and for sale on trademe.

Anyone know how she ended up in the South Island & what of her life in between?

06-11-2015 Chris McMullen Input edited by Alan H

Morrie Palmer of Devonport built the hull and Mr Neil Wilson finished her off. Not Brin Wilson.
Mr Neil Wilson (I believe an ex Joiner) was the owner and manager of the Auckland University Maintenance Department. He wanted no Butt blocks in his new boat and scarfed the planks himself while we built the boat.   She may have been 34 Feet but was not triple diagonal planked. (That was later corrected.)
I started my apprenticeship with Morrie 16th of January 1961 and transferred to M C Carter Ltd  30th of August 1963. I worked for Morrie two years seven months.
When I started he was working in his backyard at Point Chevalier. He was finishing Basl Kelly’s raised deck Stewart 34 Pania. I recall a huge launch hull on his section painted with red lead. I am not sure but it may have become the “Lady Argyle”. I never worked on her.
Soon after, Morrie moved to #15 Clarence St Devonport. (see the Cara Mia site for more https://waitematawoodys.com/2014/01/17/caramia/ )  Cal Crooks joined us. Morrie and Cal had both worked for Colling’s and Bell and were very competent workers. I was only the apprentice boy. It was high productivity and had to be as boatbuilding was a competitive cut throat business. At Devonport at least five major builds took place Cara Mia, Lady Ethel, Venture, Oranoa and the Stewart 34 Phoenician. All that, along with repair and insurance work all done, by three people (average) in just over two and a half years. Sure they were hull only or hull, decks and super structure. Mostly the owners finished the job. “Oranoa” was the exception and largely complete and later launched from Devonport wharf
Morrie had very little machinery. It was measure and cut once boatbuilding, nothing fancy just get the job out.  His call at the end of lunch break was. “This won’t Grace the Harbour”  Lets get on with it.
Morrie owned and cruised with his Family the twenty Six Foot Mullet Boat “Omatere” previously owned by Basil Kelly. It may have been a trade in on the Pania.
Morrie was very keen on Mullet boats and encouraged me to build one. She was the last planked Mullet Boat. The 22 Foot “Tamatea”. I built her while I worked for him. I bet he later regretted his action. I was building the boat after hours in my parents back yard and it must have affected my work.

Valmarie

VALMARIE

details & photos ex Ken Ricketts, Martin Bertold & trademe

Built by Francis Wells of Wakatahuru in the South Island, for himself & was built of double diagonal planking in kahikatea, started in July 1951 & launched in 1960.
Whilst originally built by Wells as a work boat for himself, as you can now see, she is a beautiful, very comfortable, heavy displacement pleasure craft that could go almost anywhere.

Wells owned her until 1981 & after he died in August of that year she was sold by his estate to Murray Harris of Nelson circ. August 1981. She passed to Eric Jacobson between 1985 & 1987, who renamed her Evangeline & brought her to Auckland. In May 1993 she was sold to Brent Haslet & Carol Rush of Auckland who sold her in 2003 to Craig Burrow of Taupaki, West Auckland.

She is presently owned by David Brown of Auckland who advised that the large chrome throttle controls came off the previously destroyed Fairmile Mana.

She is driven by a matched handed pair of Gardner 8L3 eight cylinder in line diesel engines. The motors were originally from the island trader Rana which Brown traveled to Rarotonga to remove, at the end of her life & then bring them to NZ for installation in Valmarie. She had a cruising speed when new of 9.5 knots & top speed of 11 knots.

She has been returned to her original name, somewhere along the way & is currently for sale on trademe.

Lolene

LOLENE

A classic displacement sedan launch, designed and built by Billy Rogers & launched in 1963. She was named after one of his daughters, as were a lot of Billy’s boats.

Kauri carvel construction, powered by 6 cylinder 120hp Ford diesel.

34’Length, 10’ 9” beam & 3’ 3” draft. 5’ 10” headroom, she sleeps 5 in single berths.

Currently for sale on trademe.

Harold Kidd Update

As I understand it, Billy Rogers built LOLENE for himself around 1963. Certainly she was first registered in his name with APYMBA at his then Wiilliamson Ave., Grey Lynn address. Billy had owned the 28ft keel yacht LOLOMA as a young man and was deeply fond of her. As a result some of his boats and children had the letters LO and LOMA in their names eg LADY LOMA in 1949.
Close sister ships were IOWANA (I1966) built for Dr. Kreichbaum and still in the hands of the Shorty Sefton/Pollard family and LADY FLORENCE (1966) built for Hedley Kendall. Andrew Pollard is a mine of information on these lovely sedans.
Subsequent owners of LOLENE have included K.D. Orell, Takapuna (1973), John Cossar 1989-95), Gary Hogg (1995) and Ken and Rhonda Blakie (2001).