Category Archives: Working Boats

The Sad Demise of Norwest

Posted on by
17

Screen Shot 2019-07-09 at 7.54.15 PM

IMG_1199

The Sad Demise of Norwest

Back in early 2013 Zach Matich sent me the top photo of Norwest. Zach also supplied the details below.
This last weekend Jason Prew was mooching over on the West Coast and snapped the photos showings the final resting place of Norwest on the Kaipara Harbour.
“The Norwest was built in Whakapirau in 1909 by Arthur Forester. She was named the Kuaka, the Maori name for Curlew, and had “Kuaka” written on her port side and “Curlew” on her starboard side. She was built for a Mr Adams who had a pear orchard just down the harbour from Whakapirau on what is now the Cullen farm. She was designed so that Mr Adams crippled daughter could wheel her wheelchair around the deck, and was used for transporting fruit to Helensville for the markets. She was powered by a Union Standard single cylinder ‘Make and Brake’ motor and had a swinging cradle for 6 wet cell batteries. This motor is now in the private collection of Darcy Sterling at Maungataroto.
After lying idle for some years the Kuaka was sold to Mr Cliff of Paparoa in 1919. Mr Cliff took her to Pahi and re-corked and painted her and added a new piece to the stern post which was suffering from dry rot. he used her for taking picnic parties down the harbour and moored her when not in use up the Paparoa Creek behind what is now the Paparoa Pub. There was a huge flood in Paparoa in 1923 and the Kuaka was picked up by the flood, carried over the bridge and placed in a paddock on the other side with no damage to her at all. When Mr Cliff passed away in 1924 his sons sold her to a Dr Marshall, from, I believe up Port Albert way who in turn sold her to Mr West who owned West’s Timber Mill in Helensville. It was at this time that she was renamed the ‘Norwest’ after Nora West, Mr Wests wife. She was used for about the next 20 years up until 1945 towing logs all over the Kaipara Harbour, and then in about 1945 Harold Stanaway bought her, followed by Dink Jolly, and then Everard Judd bought her for $250.00 for towing barges. By this time she was in a terrible state so he employed Rodney Morgan, a boat builder to more or less rebuild the hull and cabin.
Everard Judd sold her to Murray Prictor of Port Albert in the late 60’s who is turn sold her soon after to somebody on the East Coast and the history is pretty vague after leaving the West Coast. We do know that some time was spent up the Clevedon Creek and we also know that she has been used as a fishing boat on that coast. 
She was brought back to the Kaipara by Stafford and Rosemary Hill.
Unsure who currently owns her.”
Update 11-07-2019. photos below taken in 2015 by Dave Stanaway
IMG_0150

Knoxie III > Miss Ida

Posted on by
14

Miss Ida 1 - Copy

Miss Ida 3

KNOXIE III > MISS IDA 
I was contacted yesterday by Greg Philpott, up until recently the owner of the Opua General Store in the Bay of Islands. Greg is on a missions – I’ll let him tell the story.
“By way of introduction, my partner Margaret and I have recently sold the Opua General Store business after owning it for just short of 6 years. During that time I became immersed in the history of the General Store and Opua itself  (along with it forerunner Te Wharau, which was the town that grew up in the 1870’s/80’s to service the Loading Ground – the site where Kawakawa coal was trans-loaded to ships at anchor. In 1884 the rail line was extended to Newport (now Opua), many buildings were shifted from Te Wharau to Opua and as such the township of Te Wharau has now totally disappeared.) The reason for relating that little snapshot is that all manner of launches, workboats, ferries and tourist craft have been a part of Opua (and by locational connection, the Bay of Islands) for its entire existence.
And so on to my current project – The Boats of the Bay. This is looking at the history of the commercial tourist Boats of the Bay of Islands. Their origins, their working life and their final situation
 
Here’s where I need help – Knoxie III was built for A E Fullers and Sons by Warne Bros at Matauwhi Bay in 1939. She was renamed Miss Ida in 1949. Whilst built originally to enhance the Fullers fleet for the Cream Trip it appears that much of her latter days were spent as a work boat and as the back-up launch for the Opua Okiato vehicular ferry, photos above. I am looking for pictures of her carrying the name Knoxie III And when did she depart the Fullers fleet and what was her history post Fullers?”
Anyone able to help out?

Miss Sandra (Kokiri)

Posted on by
6

Screen Shot 2019-06-23 at 10.08.23 AM

Screen Shot 2019-06-23 at 10.08.12 AM

MISS SANDRA (Kokiri)

Today’s woody comes to us via Greg Philipott’s fb page. Greg commented that Miss Sandra was built c.1962, probably in Auckland (tbc).
She was named after Lola and Snooks Fuller’s daughter. Then renamed Kokiri after NZ Shipping / P&O purchased Fullers from George Wooller.
Chris Brittain commented on the fb post that Fullers repowered her with a GM 671.
Nathan Herbert also commented that her hull looked like an early Jim Young design.
Greg is keen to learn more about Miss Sandra. So woodys any details, stories, photos?
Input from Graham Clifford
“I was a full time skipper of Miss Sandra from 1967 – 71 when she was engaged in big game fishing, light tackle winter fishing and occasional runabout duties.  I continued my association with her on a piecemeal basis in the years after she retired from fishing in 1971 and took her new name “Kokiri.”  Under this name she was used variously as a scenic cruise boat,  a pilot boat to and from ships visiting Port Opua and a general roustabout.
Miss Sandra was a 36 foot Vindex hull built of kauri in Fullers new slipway shed at Russell in 1966.  I was present during her construction.  In late ‘66 I took over as her gamefishing skipper.  Together we captured a 547 pound blue marlin.  The following season, in March 1968,  we landed and weighed the biggest marlin caught in New Zealand waters, a blue marlin of over one thousand pounds (1017 lbs)
Miss Sandra was originally powered by a 6-cylinder Fordson diesel but was soon repowered with a Caterpillar turbo charged engine which gave her a top speed of 20 knots light. I used this engine for more than two years.  In 1967 I used Miss Sandra and her speed to assist Police in the transfer of a stabbing victim from a ship which arrived in Doubtless Bay. The victim (Wylie Hanby Roberts) needed hospital treatment and would have certainly died had the ship not diverted to Doubtless Bay.  Miss Sandra had the speed to get from the Bay of Islands to Doubtless Bay in time to meet the ship offshore.   The Caterpillar engine was replaced in 1969 with 6 cylinder Fordson and again with another Fordson.  Her final re-powering was with a noisy GM which coincided with her name change to “Kokiri.”  Her gamefishing days were over.  She became a part time scenic cruise boat fitted with airline-style seats and a small public address system.  This role did not suit Kokiri well and I personally shunned her other than to favour her for pilot duties.  The two principle maritime pilots liked her for her speed.”

Diana White

Posted on by
2

20161118_134743

DIANA WHITE

Today’s woody story is a tad out there – we have a 38’ ex lifeboat looking for a new home. Well to be honest we are really looking for a woody with a big shed and lots of vision. Owner John Fairburn wrote to me saying he had too many projects on the go and needed to find a new home. I’ll let John tell you in his words:

“Diana White has crossed the Manukau Bar in extreme conditions without a worry and travelled at sea when no-one else was, is now for sale. It had always been a slipway boat until it’s 1st private owner previous to me took it over and the huge anodes that earthed the SSB radio brought on a softening of timber through electrolysis around bronze, stainless and galv steel plus alloy cabin.

A lifeboat has many compartments held together with many bolts and special bronze and galvanised steel framework that had begun to rust in a few spots, so it took a bit to get back to bare hull to work on any soft stuff, and then I was going to use epoxied timber to rebuild. It’s a double ender 37’6″ x 12’0″ x 3’6″ with 2 x 23″ propellers in tunnels and weighed 13 tons. 

I was going to re-power and fit twin rudders so sold the 2 D series Fords that returned a litre per nautical mile at sea. At the moment it’s a bare hull so easier to survey (tap hull for soft timber) and is much reduced in weight and therefore easier to transport. I was in process selling props / shafts / stern-tubes / stuffing boxes and couplings, rudder, stainless bow rails and alloy swing down mast with radar reflector and 2 x stainless fuel tanks and the guy across road wants to turn hull into a house/cabin but a local Katikati boat owner reminded me of Waitemata Woodys, so if someone wants to pay me $3000 they can have the lot complete with RNLI drawings (1 inch to the foot) so they can plan their finished project.

I’ve still got a big oak tiller that has bronze end fitting that clicks into bronze shoe for manual steering and a special cutting tool to clear propellers through tunnel access ports.”

20160929_163234

Auckland Anniversary 1919 Regatta

Posted on by
8

Screen Shot 2019-06-08 at 3.36.44 PM

Auckland Anniversary Regatta 1919

Todays photo is a gallery of photos from the 1919 Auckland Anniversary Regatta (Jan 29th) . A great collection, including the Walsh Brothers (Mission Bay) flying boats – what interests me is the two launches, centre left and right. Both look like they have a good turn of speed.
Can anyone ID them for us?
Photos appeared in the Feb 6th 1919 issue of the ‘Weekly News’ and come to us via Keith Humphreys fb
.
Harold Kidd Input – Nathan Herbert was right when he commented about the right hand launch, she’s the Lane DEFENDER, formerly SCRIPPS III, now with a dodger over the cockpit. The left hand launch is clearly Bailey & Lowe and I’m sure is WINSOME (I) although I can’t figure out her racing number. She’s too small for MANU.

Gaff Schooner Collides With Container Ship – Overseas Report

Posted on by
6

Screen Shot 2019-06-09 at 4.56.46 PM

GAFF SCHOONER COLLIDES WITH CONTAINER SHIP & SUNKS – Overseas Report
 

The gaff schooner Elbe No. 5 collided with a container ship in the Elbe river (Germany) last weekend. The boat sank after the collision with the rescuers managing to rescue 43 passengers.

The historic 1883 built, 121’ vessel had only just returned to Hamburg’s waters after it had spent eight months in a Danish shipyard undergoing a €1.5 million renovation and was relaunched only days before the collision.

She was struck by a 462′ container ship, the Astrosprinter and suffered serious damage and sank, though rescuers were able to secure the wreck relatively close to the surface.
The container ship continued its voyage, having suffered almost no damage. Apparently, the container ship was out of her channel and likely at fault.
So woodys this serves as a warning to be very careful out there, particularly as the Auckland council continue to expand the container port into OUR harbour…………….
Screen Shot 2019-06-09 at 5.00.41 PM

Mahurangi Regatta 2019 – Classic Wooden Boat Movie

Posted on by
3

Mahurangi Regatta 2019 – Classic Wooden Boat Movie

The weather forecast is for a very average day today so I decided to share some serious eye candy with you. The video above comes to us from the very talented Roger Mills via his drone camera.
Once again Roger was out and about over the regatta weekend and captured some amazing classic woody footage.
I have to comment that it was very pleasing to see the classic woody launches featured, thank you Roger. All to often people forget there are more wooden motorboats afloat on the day than the stick and rag boys 🙂
Enjoy the video – its a goodie.
To view a high res / quality version of the movie – us the link below.

Double End Clinker Launch

Posted on by
Reply

Screen Shot 2019-05-28 at 12.42.18 PM

Screen Shot 2019-05-28 at 12.43.58 PM

Double End Clinker Launch
 
The above 21’ ex crayfishing clinker launch recently popped up on trademe (thanks Ian McDonald). Her age is little deceptive, she was in fact built in 1980 and is for sale by boat builder Robert Priest, who built the current cabin and installed the 18hp Yanmar diesel, thats pushes her along at a comfortable 6 knots. Robert has owned her for 35 years. 
Her listing states that she is very well built and currently berth at Mana Marina, Wellington. Comes with what’s described as a beach trailer. 
 
She looks a very salty craft and would be perfect to someone with a bach looking for safe, reliable transport and a spot of fishing. Anyone able to put a name to the vessel and who might have built her?
 
Looking For Info On Kiw Boat Builder – Rex Wright

Kaipara based woody – Greg Schultz is trying to track down info on a kiwi boatbuilder. He doesn’t have much to go by except the name Rex Wright and that he worked in Auckland post WW1, before moving to Cairns where he was reasonably well know around the yards.

Rex was born in 1888 and died in 1990. Can anyone help Greg with info on Rex’s past e.g. where he worked, the vessels he built etc?

Kotare

Posted on by
9

Kotare1

Kotare2

KOTARE

Last weekend Angus and Jenny Rogers sneaked away from OBC of a spot of Autumn cruising. The destination was Rakino Island and Angus reports it was perfect.

While there he spotted the launch Kotare at anchor in West Bay. Kotare is 25’ and built by Kingfisher Boats in 1951, they are still in business but these days they build aluminium boats down in Tauranga. Angus understands she started life as a crabber.

Angus commented that in his eyes Kotare is beautifully proportioned and an example of a reverse sheer that works.

Anyone able to tell us more about the launch and whether others were built .  Fyi – Kingfisher in Maori is Kotare

Now each to their own taste – but I would be keen to see some colour introduced to the cabin sides – something like the boat below.

Input from Brian Worthington – The Kingfisher boats that build alloy boats now days has nothing to do with Bill Vissor that was original Kingfisher Boats building handcrafted
wooden boats in Tauranga.

Paint topsides example

The Marine Photographer’s Eye, Benjamin Mendlowitz – OCH Video Featuring Kiwi Classic Wooden Boats

Posted on by
1

Screen Shot 2019-05-26 at 3.41.08 PM

The Marine Photographer’s Eye, Benjamin Mendlowitz – OCH Video Featuring Kiwi Classic Wooden Boats – The best photos of our fleet you will have ever seen!

Today’s story is rather special as the team at offcenterharbor.com have given waitematawoody readers access to their latest video that features woodys from this years Mahurangi Regatta. The OCH site contains over 500 videos (& 500 articles) that range from boatbuilding, to trimming sails, to a complete course on understanding every aspect of your marine diesel engine. There’s even a 42-part series on how to build a Caledonia Yawl camp cruiser. The collection of videos features mariners and craftspeople at the very top of the boating field, showing exactly how they do things, and which products they use in their work.

One of the OCH founders is Benjamin Mendlowitz who, in my eyes, is the worlds finest photographer of classic wooden boats, this January, Ben and his co-founders escaped the US winter and headed down under. Whilst in NZ their #1 mission was to attended the Mahurangi Regatta and to this end on the Saturday Jason Prew with My Girl & myself with Raindance hosted – Maynard Bray, Benjamin Mendlowitz & Steve Stone for a Regatta photo shoot.

In the 11 minute video, Ben talks us through his day on the water filming woodys. In the opening section when Ben is commenting on our classic fleet he says “I was newly inspired in my photography”. When a photographer with as much experience as Benjamin Mendlowitz says that – that is saying something about our woody fleet. Plus the video is a master class for anyone interested in marine photography.

CLICK THE LINK BELOW AND SIT BACK AND ENJOY + CHECK OUT THE COOL OCH OFFER BELOW

https://www.offcenterharbor.com/videos/marine-photographers-eye-benjamin-mendlowitz-in-new-zealand/ww190523

SPECIAL 50% OFF – LIMITED TIME OFFER

The OCH site is 100 percent membership driven, and they do not accept advertising. Not lining their pockets with advertising enables them to provide OCH members with the unvarnished truth, straight from legendary masters of their craft – without worrying whether they piss off an advertiser 🙂

In addition to allowing WW woodys to view the video at no-charge, they have also put together a one-off subscription offer for WW readers.

They are offering 50% off the annual rate – thats an amazing US$24.50 – BUT woodys be quick it will not last for long + there is a Risk Free Guarantee – try it for a few days, if your not happy they will provide you with a 100% refund. I’m a subscriber – I love the site, I have watched one story probably 10 times.

JUST CLICK THE LINK BELOW TO SUBSCRIBE  

https://www.offcenterharbor.com/join-now-2450-ww/

WHAT YOU GET:

  • FULL ACCESS to everything on the site for 1 full year (including our growing library of over 1,000 videos and articles)
  • Your membership includes three full “how-to-build” video series (80+ videos worth over $500 that you get free)
  • You can get your questions answered in the “comments” section under each video and article
  • Join our community of “off-center” boating enthusiasts around the world