Category Archives: Designers & Builders

CLASSIC WOODEN LAUNCH OTEHEI – Flashback

Posted on by
Reply

CLASSIC WOODEN LAUNCH OTEHEI – Flashback

Wednesdays WW story on the ex game launch – ALMA G II, gave woody Gavin Bradley a nudge to send the above photos of his wooden classic – OTEHEI.

Gavin commented that the date was 29 years ago (1995) and Craig McInnes was doing the work of 5 men.OTEHEI was designed and built c.1927/8 by Collings & Bell and had several ’sister’ ships, ALMA G II being one of them. Her first owner was a Frank Elliott and she worked out of Zane Grey’s camp at Otehei on Urupukapuka Island in the Bay of Islands. 

OTEHEI spent some time on Lake Taupo before returning home to the far north, where she residues today.

Lots of photos and intel in the two WW story links below – particularly the 2017 story.
WW Aug 2013 https://waitematawoodys.com/2013/08/28/otehei/ WW Jan 2017 https://waitematawoodys.com/2017/01/10/otehei-2/

CLASSIC WOODEN LAUNCH – TAINUI – On The Move Again

Posted on by
1

CLASSIC WOODEN LAUNCH – TAINUI – On The Move Again

Back in early Feb 2016 we reported that John Sloane had recently purchased the 1967 38’ ex workboat – TAINUI and had transported her to the Whangateau traditional boat yard for a major refit – well woodys fast forward 8 years and the decision has obviously been made to relocate TAINUI to another yard. 

My spies tell me that Blair Boats in Kerikeri will be taking over the project, so we look forward to regular updates and photos.

At one stage there was a mint Gardner engine (see below) waiting to go in, keen to learn what became of that engine – hopefully still in storage.

In a previous WW story we learnt from Phil Saunders that TAINUI was the (then) Marine Department fisheries protection launch based at Russell during the 1950s and 1960s and was skippered by Jake Saunders and Inspector Anderson. She is a great sea boat and when in service she was kept in immaculate order. She sailed weekly to provision Cape Brett Lighthouse, often in inclement weather and also oversaw the harvesting of rock oysters up Kerikeri inlet.

UPDATE ex JOHN SLOANE – The 3LW was traded and we upgraded to 5LW . Which is sitting in her . Dave Shaw the grandmaster has done all the work as I wanted the engine to be a show piece with open engine room,  including move hydraulic gear box . Will keep you posted as things progress . 

Screenshot

CLASSIC LAUNCH – LADY CAROLE RESTORATION – UPDATE #5

Posted on by
3

CLASSIC LAUNCH – LADY CAROLE RESTORATION – UPDATE #5 Another update on the work in progress from co-owner Patrick Crawshaw.

UPDATE BELOW: 

It’s been about three weeks’ since the last update and in that time we have finally got to the stage where she is ready for painting. We are working from top down and have got to the final undercoat (orange) down to the gunnels.  We have gone for a low-sheen, two-pot system for the whole boat with two primers, two undercoats and two top coats.   

There has been the usual wild-Winter-Northland weather, which has hammered the cover, but it’s still holding up – not long to go now so. It just has to last until the windows go in and we get the finish coats on up top, which will be the week after next.

She had holes all over the place and many were in the side of the hull – including bilge ones. So, they have all been re-directed and moved to the under the duckboard where you can’t see them. The hull now is without any unsightly grills/holes/lettering, etc, etc. Nothing now to draw the eye away from the lines. 

The line that connects the forward cabin to the aft deck is now re-instated. That was fun…Hundreds of cuts later, we got the curve, although it wanted to keep snapping. We took it all the way to the front of the forward cabin as it was. This has given the forward part above the windows a really nice profile.  Finally, the lines of the LADY CAROLE have been restored working nicely with those reduced windows. 

The cockpit drainage was a plastic box with a float switch. This never really worked properly and was prone to blockages, so the drainage for the cockpit has been returned to self draining with larger holes so they don’t get blocked. 

The back doors had brown smoky glass in both sections, so they were taken to a local joiner to have slats put in the upper section so we can improve cabin ventilation. Here they are almost ready for the top coats. 

We decided that the trims should be put back on the windows to give it some profile and finish the look. Originally L.C. had trims, but these had long gone.  

The hatches are finally finished and pretty much ready for their top coats. 

RSVP – waitematawoodys@gmail.com

KIWI REBUILD OF A CLASSIC CHRIS CRAFT RIVIERA – Whimsical Mistress

Posted on by
5
Lake Rotoiti 2023 – Alan H

KIWI REBUILD OF A CLASSIC CHRIS CRAFT RIVIERA –  Whimsical Mistress

Last month while discussing the gradual demise of a once nice wooden classic launch with Glen Archer he casually mentioned that he had imported a Chris Craft Riviera from the USA and totally restored / rebuilt her back in NZ. I’ll hand over to Glen to tell the story –  

 “Today I share some images and back story of our 1950 Chris Craft Riviera 20 that we imported from the USA in late 2018 from a deceased estate, the boat was pretty much stuffed, was in parts and had not been in the water since 1991, what followed was a full 3000 hour / 4 year restoration. The boat has 40% new oak frames, a full no soak bottom and a new deck, with it being very hard to see where the new and old timber meet.

The boat was relaunched in February 2023 The boat has been completely refixed fully with new silicone bronze screws and bolts and reassembled using 130 tubes of 3M 5200, stains and paints were imported to ensure period correct and the original MBL158 engine has been brought back to life with lots of new bits.  28 coats of varnish finish the boat off, along with a complete new interior, finished exactly as the boat left the factory. Quite possible the worlds most impractical thing to boat in, yet very high on the smile factor!” 

CLASSIC WOODEN LAUNCH – ALMA G II Restoration Updates #3 & #4

Posted on by
1

CLASSIC WOODEN LAUNCH – ALMA G II Restoration Updates #3 & #4

We have been following the refit / rebuild of the1927 Collings & Bell classic wooden launch – ALMA G II for a while now, the last WW story was back in December 2023 Dec 2023 and I have a confession to make – Update #3 slipped between the WW cracks so today you get a two-4- one 🙂

UPDATE #3 from Sian Steward at CMC Design below – 

“So much has been going on in the last few months, the team have been working very hard and things are looking great.

After the long long months of initial work of bringing all the bones of the Alma G II back together and many coats of white paint in the hull interior we moved onto the next phase.

The hull has been double skinned with kauri planks, filled, fared and prepped for fiberglass. It was a shame to say goodbye to seeing all the beautiful original timber underneath, but a boat that floats is the ultimate goal.

It’s good to have all hands available for this aspect of the build, working together makes the tough job of glassing much more streamlined and quicker. No one wants to draw out glassing for too long and we are grateful it isn’t a regular part of our day-to-day job..

More full suited days in the hot hot heat bogging and readying for paint. This is where the restoration really looks like it is getting somewhere. We have been going since last April and these milestones are meaningful to both the workers and the boat owners.

The Alma G II has been carefully rolled once more and the whole process starts again on the port side.

From there, back to upright and some more detailed discussions on the interior finishes and fixtures. The owners are keen to honor the traditional elements of the boat and have been sourcing some really lovely items from navigation lights to the bench top surfaces.

Top coat paint colour choices are being made and we keep moving on…”

UPDATE #4

“Further updates on the Alma G II. We have layers of paint going on!   More hard work has been done in these last few months with the Lees engine going in, fiberglassing, long board sanding and bogging and fairing.  Real backbreaking stuff. Onward we go with paintwork and then the interior fit out. “   

LINKs TO PREVIOUS STORIES FOLLOWING THE PROJECT

WW May 2023 Story https://waitematawoodys.com/2023/05/01/restoration-of-alma-g-ii-begins/

WW Dec 2023 Story  https://waitematawoodys.com/2023/12/06/alma-g-ii-restoration-update-2/

DIOMEDEA – CLASSIC WOODEN GAME FISHING BOAT

Posted on by
5

DIOMEDEA – CLASSIC WOODEN GAME FISHING BOAT

Woody Angus Rogers recently came across a copy of Sea Spray magazine from October 1965 which had the 36’ Andrew Donovan designed wooden launch – DIOMEDEA on the cover.  DIOMEDEA was built by the Lane Motor Boat Co.

The first thing that Angus noticed was how similar she was to her bigger sister the 50’ AROHANUI, also built by the LMB Co. and launched in early 1965. Which also graced the cover of Sea Spray in April 1966 (photo below).

DIOMEDEA was a magnificent build and spec’ed to the max – the article is an insightful read. Sea Spray magazine described her design / style as a ‘sport fisherman’, she had a beam of 11’11” and draft of 2’10.5”. 

When launched she was powered by a Caterpillar turbo D330 4 cyl. 180hp diesel that gave her a top speed of 14 knots.

On one of my trips (Oct 2022) to Whangaroa I spotted DIOMEDEA docked at the Whangaroa Game Fishing Club marina. In the photo, below, she appears to have lost the hothouse that was up top when Dean Wright photographed her in May 2016, also at WGFC. 

Oct 2022
May 2016
AROHANUI

HALVORSEN 21 – Classic Australian Wooden Boating

Posted on by
Reply

HALVORSEN 21 – Classic Australian Wooden Boating

On one of my many scrolls thru the classic wooden boating online world I came across a story by Tad Roberts, an American yacht (the generic USA term for all boats) designer. Tad was talking about the iconic Australian boating marquee – Halvorsen. 

Several of their craft have appeared on WW, but Tad’s focus was on the Halvorsen 21’, and he advised that the craft were built from the late 1940’s and were available with both a broken and straight steer. Tads preference was the broken sheer version, commenting that ‘it carries a bit more strength of character’.

Else where on the story we learned that the 21’ launch had a beam of 7’3” and was originally powered by petrol engines of around 50hp.

Back in Nov 2023 WW ran a story on the Halvorsen boating dynasty, which included a wonderful video by Tony Mackay.                 LINK to the WW story here https://waitematawoodys.com/2023/11/04/the-halvorsen-story/

These smart looking woodys were years ahead of the market, and sadly we never had anything similar in NZ. If had and they were still around today – the Wooden Boat Bureau would be able to sell them in a flash 🙂

The colour photos above feature the launch – GLENORIE. The black and white photo below is of the Halvorsen yard in Neutral Bay, Sydney c.1936

SEA FEVER – Gets A Visit To  The Classic Wooden Boat Parlour

Posted on by
1

SEA FEVER – Gets A Visit To  The Classic Wooden Boat Parlour

Earlier this year SEA FEVER the 34’ 1958 John Salthouse design / build wooden launch changed hands The Wooden Boat Bureau worked with owner Doug Reid to find a new custodian. The buyer ticked all the boxes on Dougs wish list, and if Doug is reading WW today I’m sure he will be very chuffed to see SEA FEVER getting TLC she deserves. (when launched her name was Onetaunga.)

I’ve commented many times that one of the reasons particular craft pass the half century mark is good old luck – luck in terms of having the right owners who value these classic craft, SEA FEVER has had a succession of good people caring for her and it shows.

In the next few days Jason Prew will be applying his skills to SEA FEVER and another one of our classic woody fleet will have a JPPJ (Jason Prew Paint Job)

SEA FEVER below in 2022 at anchor in Chamberlains Bay

No Names (and not SEA FEVER) – But the decal is a little OTT 🙂

RSVP – waitematawoodys@gmail.com

CLASSIC WOODEN YACHT TAIROA RELAUNCHED

Posted on by
6

CLASSIC WOODEN YACHT TAIROA RELAUNCHED

During the week I received an email from Otto Schuttle with the great news that the Athol Burns designed 26’ cutter – TAIROA had been relaunched after her unfortunate 2015 accident. Read below- 

Back in June 2015 we ran a story on the yacht being swiped onto the rocks during a fierce storm in Wellington harbour. From the ‘news’ photos things looked grim but Athol Burns built his craft like the proverbial brick out house.

Thanks to the efforts of Russell Ward and family we received photos of TAIROA being salvaged. Then in Oct 2018 we received an update from her new owner (Otto) with some work in progress photo. 

Link below to the 2015 story – lots of photos and details  https://waitematawoodys.com/2015/06/20/tairaroa/

Otto’s note covers off the news and his happiness at finely getting her back afloat – I’ll hand over to Otto – 

“It was a tremendously emotional day for me on Saturday 27th July 2024 when many friends and family gathered at the Evans Bay Boat yard to see TAIROA relaunched.

This has been a long journey with a vast amount of research and learning ,many hours watching YouTube. Trying things and scraping them locating materials online to find it wasn’t exactly what I wanted or it didn’t quite fit. . at times things went wrong and had to be redone, or just pack up and go home and come back another day and have another go with fresh eyes and mind. OH and going to work when things were going really well on a project and wanting to get back to it. having to pack up and go away and wait for the glue, varnish or paint to dry,

She is now afloat in the Evans Bay marina looking as if she belongs 

I still need to have some sail modifications done to suit the furler, permanent mooring lines fitted to the berth and some interior work done but its a boat always work to do and things to buy don’t you just love BOATING”

Photos below from 2015 and 2018

2018

UPDATE: Todays story prompted two woodys to contact me re a photo of the yacht , not long after launching – the amazing thing was it was the same photo – below.
Brian Peet commented  – the photo was taken by my father John in the 1960s. Alby Bland was a member of the Glendowie Boating Club and he built the boat in his back yard. I used to walk past it everyday on my way to school. 
Russell Ward commented – the photo of her was when new. It was sent years back by the builder’s daughter. Fabulous ship. The spirit of Athol Burns.

Help Needed ID’ing This Wooden Boat

Posted on by
Reply

Help Needed ID’ing This Wooden Boat

Todays photos another from the McLeod Collection at the Auckland Library Heritage Collection and comes to us thanks to Nathan Herbert.

The photo is just tagged Bayswater and has a 1900>1909 time period on it. It does look vaguely familiar but I couldn’t find any reference to the photo in the WW archives.

Can anyone help put a her to her.

What’s The New Must Have In Classic Wooden Boating

Answer bow thrusters  – the Slipway Milford is doing a roaring trade in retro fitting – hauled out for work that included a bow thruster – IONA II, SEA FEVER , PACIFIC

PACIFIC