Todays woody while based in NZ started life on the other side of the world – at the Merritt boat yard in Fort Lauderdale, USA. Built in the early 1960’s she was originally named – Tuna Teaser. Fast forward to the mid 2000’s and she is now named Dream Girl and pops up in Pago Pago (American Samoa) and then in Rarotonga. Sadly while in Rarotonga she sunk on her mooring in Feb 2006, fast forward again and she was freighted to New Zealand. Not sure of the timing between sinking and transport to NZ but before the sinking Dream Girl was powered by 2x 320hp Cummins giving her a reputed cruise speed of around 15knots and a top speed of 25knots.
Home these days is in West Auckland where she has been stripped back, damage repaired and is currently a hull and deck + a few original fittings.
What we know about her is that she is 40’ in length and appears to be strip planked and glassed.
Top photo and below from her ‘off-shore’ days.
While lacking the kiwi classic woody looks, if a fast classic sport-fisher appeals, Dream Girl could be a good entry point. You’ll find her on tme, if not already sold.
Well if you believe the NZ Classic Yacht Association constitution – steel construction gets the tick as being eligible to fly the CYA burgee.
So today we feature the 70’ steel schooner – Haparanda, designed and built by John Lundmark in 1960. She under went a refit in 2008. Haparanda is in charter, based in the Viaduct in Auckland so could be a nice retirement business for an old salt. The asking price ($1.3million) might narrow the list of buyers.
With a beam of nearly 15’ she is a fulsome lass and can sleep >12 people. When the sails are all stowed away a 95hp Gardner gets her along at 9+ knots.
Haparanda is a boat that I have walked past many times berthed in the city, now we get to see below decks. Buy a Lotto ticket 😉
The John Lidgard built launch – Kingfisher* was built c.1965, her owners Noel / Thora and son Gary Sparnon finished the boat off at the Lidgard shed in Glen Eden. With Noel being a cabinetmaker the fit out was to a very high standard. When launched she was 43’, with a beam of 13’6” and drew 3’6”. Her hull is 3 skins kauri with the 2 inner skins on opposite diagonals and the outer skin full length fore and aft + f/glass.
As launched she was named Avenger and kept at Te Atatu.The Sparnon family did not keep her long because by 1968, the family were living in Paihia, Bay of Islands.
Prior to Avenger there was Olympia II, also built to hull & decks stage by John Lidgard c.1962-63, with Noel S again fitting out the interior – link to previous WW story below. https://waitematawoodys.com/2014/10/15/olympia-ii-2/
Noel S also built the Avenger II after her, having bought a 42′ molded Cookson hull, onto which he added & completed all the varnished teak coamings & interior himself, at his daughter’s property in Avondale, Avenger II was later sold.
Noel S never actually kept any of his boats very long after they went in the water. Kingfisher was quite unique when launched having a fly-bridge styled in to her coamings making it visually part of the boat i.e. not appearing to be an add on or afterthought.
There are still some gaps in her ownership records, Ken Rickets has established that she was bought c.2015 off a policeman who had been living aboard her for an unknown length of time up to 2015, at Westpark Marina, by Richard & Bernadette Schofield. During their ownership they re-conditioned her Ford 120hp diesel engine and Borg Warner gearbox. She was sold c.2018 to her present owner, then Mangonui resident Brett Walford. Now retired Brett has moved to Great Barrier Island and has the boat for sale, still based at Mangonui.
Brett W also changed her name to Kingfisher*, he commented to KR he made the change because as she cruises around 8 knots and this is an ideal trolling speed to catch kingfish.
Both of the last 2 owners have spent collectively large sums on maintenance and upgrading of the interior and equipment, hence she is in very good condition and more or less just as KR remembers her when launched. Keen to fill in any ownership gaps, in particular Noel Sparnon’s son, Garry Sparnon, who may still be in NZ and hopefully he gets to view this story and might be able to embellish it more. (Update – have been in touch with Gary Sparnon , he is still in NZ, father Noel died 3 years ago aged 96. Gary was very happy to read todays story, but has nothing to add. He will however keep a look out for any old photos. AH)
(Thanks to Richard and Bernadette Schofield, and Brett Walford and wife for providing access to the data and images and Ken Ricketts for pulling this story together – edited a lot by Alan H)
The 39’ launch Wanderer II was built in 1965 by Owen Woolley in his boatyard on the Tamaki River.
Powered by a 100hp Ford diesel, she cruises at 8 knots. Current home is the Bay of Islands and thanks to Ian McDonald spotting her tme story we get to have a gander below.
At the risk of ruffling Cam Pollard’s feathers – I include the two photos below to show / support my personal view on varnished coamings and the addition of a fly bridge 🙂
Todays woody is the 1962, Des Donovan designed / built motor sailer – Athena. She last appeared on WW back in Feb 2019 – link below to that very informative story. Lots of photos, history and comments there.
Thanks to a tme listing we get a look down below. A snap shot – specs – 48’/12’11”/5’5” and powered by a Gardner 127hp diesel.
Her listing fails to mention that she is member of the ‘Submariners Club’ i.e. she has spent time below the waves. She also spent time in the ownership of one Alan Johnson, one of very few people 100% banned from the WW site, but that is another story…..
The 30’ launch – Captor previously made a brief appearance on WW back in January 2016, at the time we learnt from her then owner that she was built in Taupo in 1967. Planked cedar with glass top sides. Link to that WW story here https://waitematawoodys.com/2016/01/09/captaur/
Now thanks to the eagle eye of Ian McDonald we get a look down below from her recent tme listing.
Captor is 30’ in length and has a beam of 10’ and draws 3’. Forward motion is via a 110hp Nissan SD33T that sees her topping out at 8 knots.
As you can see from the photos she is well fitted out and with 450L fuel and water tanks able to do some serious cruising.
Can we ID her designer and uncover some of her past.
10-04-2023 INPUT ex PAUL DRAKE – “When at Taupo, CAPTAUR was on a mooring just outside SIR FRANCIS’s boat shed. She had no visible name so we called her THIRTY FOOTER. We must have been told that she was thirty feet long. I believe that we thought she had been amateur built by her doctor owner.
She appeared well before 1967 (the supposed build date) as evidenced by the boat sheds which were removed in 1963.
The first photo below, which I took, has appeared before on ww and is dated May 1963 or 64 (boat sheds recently gone).
The second photo shows her with a bit of bright work which enhances her in my view. The date on this photo is pre ’63 . SIR FRANCIS’s boat shed far left.
So CAPTAUR is 60 plus years old and has been well looked after. As you would say – ‘we like that’.”
Todays woody was built c.1960, carvel planked, 24’ in length and powered by a Lister 50hp diesel engine. And that folks is the some total of what we know about her.
She is up for sale on tme by the Seaview Marina, Wellington, to recoup unpaid costs.
The interior doesn’t quite match the exterior in terms of presentation but could be a low cost buy for someone. Last time I looked the highest bid was around $1k. Closes Tuesday late afternoon.
Anyone know more about the launch – almost differently had a name change since 1960.
First forward to last week and Mark contacted me to say the boat had just turned up on trademe in Motueka looking a tad tired, but recoverable. Mark commented that she seems to have had a few names along the way – in the tme listing they say she was previously known as – The Hattersly. The Master-Craft builders plaque is clearly visible in one of the photos.
Forward motion is via a Ford D series 120hp engine.Probably best described a
s a project but in the right hands she could be returned to her former self 🙂
KOTARE Re-launched Todays woody is the 28’ launch – Kotare, built and launched in 1961 by Frank Wilkins to a 1960 design of A N (Bill) Couldrey. Kotare first appeared on WW back in 2014. Over time we uncovered an amazing amount of history on the vessel. The 2022 WW story when wooden boat builder Alan Craig gave us a shed tour on restoration / rebuilding of Kotare has all the references, photos and links to her past – link to the 2022 story below https://waitematawoodys.com/2022/10/10/kotare-restoration-boat-shed-tour/
Last week Alan Craig advised they had just relaunched Kotare at Lake Rotoiti. Her owner had just finished the interior refit in his shed inTe Puke since Alan and the team at Craig Marine finished painting Kotare last year. Alan commented that she looked pretty sharp. The work had been done in a pretty confined space and they hadn’t really been able to stand back and look at it till now. A new 35hp Beta diesel has been put in to replace the BMC.
As we have come to expect of anything that slides out of the Craig Marine shed Kotare is a stunner.
NZ Antique & Classic Boat Show 2023 (Nelson Lakes)
Today thanks to the camera of Michael Brownee we get to take in the amazing woody craft and spectacular scenery at Lake Rotoiti, South Island for the 2023 NZ Antique & Classic Boat Show that was recently held (March 4>5)
Michael has captured the essence and spirit of the event beautifully , if he not a professional photographer , he should be 🙂
I attended the show 3>4 years ago and it should be on every woodys bucket list.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 