Old & & Even Older

Unknown-1

Old & & Even Older

Great photo above of the 1929, Riley 9 twin cam that Baden Pascoe recently finished restoring. The Riley is parked in front of Aumoe, the 1913 Tom Le Huguet built classic launch owned by Andrew Pollard.

Streaming Planks

The above link to the very cool youtube clip on steaming Huon Pine planks onto Ian Smith’s (new build) 24’ Ranger class gaff rigged sloop, was sent to me by Robin Elliott

 

Looking for Scorpio – Sail # 1025

I was recently contacted by John McIntosh who is endeavoring to locate the current owner of ‘Scorpio’, a Californian Bear design about 23’ loa.  Built in Milford about the 1950s by a professional boat builder (Gladden?) I’ll let John tell the story – read below.

The story is that she was built for Rush Clark snr who was the Auckland Pan Am representative, and as a young boy I went out for a picnic sail on her.  I was calibrating new Raymarine instruments on Monday 30th Oct. on my boat, when I noticed a small keeler doing leads off Princess wharf.  Later we past close by her transom and I noticed the word Scorpio carved on her stern.  I immediately looked up at the mainsail and noticed a black bear on all four paws was near the peak, together with the registration number 1025.  Because we were out “on business” I couldn’t go back and check on anything.  Needless to say she was much smaller than I recalled.

When I got home I checked my old 1977 NZYF register, and the name and number were in there, but no owner.  I got in touch with a friend who remained in touch with Rush Clark jnr in Atlanta Georgia. What must have amounted to reply the same day, I got an enthusiastic reply from Rush jnr, telling me “Scorpio” was only 23’ long and had been built in Milford.  He went on to say that it was a testament to NZ Kauri and the skill of Kiwi boat builders that “Scorpio” was still sailing. 

Rush is intending to come out to NZ early in the New Year and says he would love to see her again and would I please do my best to track “Scorpio” down.

I have rung all the marinas, most recognised yacht clubs, & Yachting New Zealand, but none could help me.  The Harbour Master’s office promised to ring back, but haven’t done so.  I have been to Gladden’s workshop, but John has been gone for decades, and workmen having a beer after work suggested that I contact your site.  

There is a nice story about the name “Scorpio”.  Rush snr and his wife Anne were captured by the Japs in the Philippines and in the prison camp they would look at the stars and think that somewhere in the world people were still free and one day, if they survived, they would also be free.

My father occasionally raced on “Scorpio” with the Squadron and said it was the slowest boat in the fleet.  Sometimes when they crossed the finish line at Orakei wharf, they could see that the tower was all closed up and the race management had gone home.

 

So woodys hopefully we can locate the where abouts of Scorpio for John.

Once again WW delivers

Just received an email from Neil Chalmers, with the below photo of Scorpio. Neil was sent the photo by Dan Ranall back in June 2016. Dan had been mooching around Okahu Bay & snapped the photo, then sent it to Neil to see if Neil could ID the yacht. Boom connection made 🙂

Neil commented that he thought there was another Bear Class in Auckland (sail #577), called Little Bear. Anyone able to confirm?

Scorpio

Screen Shot 2017-11-12 at 12.20.28 pm

 

Irwyn

Screen Shot 2017-11-09 at 8.27.13 am

Screen Shot 2017-11-09 at 8.27.34 am

 

Screen Shot 2017-11-09 at 8.28.11 am

IRWYN

Looks can be deceiving, Irwyn falls into the ‘Spirit of Tradition’ category with her build date of 1997.

At 21.32’ & a beam of 7’6” she is wouldn’t be the biggest boat in the bay but she certainly has the salty look.

Planked construction & pushed along by a 24hp 3cyl Yanmar diesel, she has a leisurely cruising speed of 5 knots. Irwyn is currently for sale & with some TCL & a lick of paint she would make a very nice wee ship.

Thanks to Ian McDonald for the trademe listing heads up.

In Case You Missed The Advice – TODAYS CYA OVERNIGHT CRUISE TO FAIRWAY BAY, GULF HARBOUR HAS BEEN CANCELLED –  it was an early call to cancel but a peek at the below will tell you why 😉 But do not despair, I have a woodys event for you very soon, details in the next few days.

Unknown-2

 

 

 

White Star – Part 1

Screen Shot 2017-11-09 at 10.05.36 am

White Star – Part 1

The above bridgedecker was launched in 1968 & built / designed by Ken Turner. Her measurements are 45.9’ x 12’11” beam & a draft of 4.92′.

In a previous life she was in survey & is built accordingly i.e. 1 1/4” kauri. Power comes from a 190hp GM671 diesel that pushes her along at 8>10 knots. She has massive fuel capacity – 2,400L, so is up for some serious cruising.

Her 4sale listing is very light on details so can we put a name to her & hopefully some insight into her history.

Another Ian McDonald trademe nudge

 

 

 

Proteus

Screen Shot 2017-11-07 at 7.46.17 am

PROTEUS        

Proteus was built by Owen Woolley in 1968, she is 38’ in length & powered by twin Commer diesels. Current home is Chaffers Marina, Wellington. That folks is all her trademe listing tells us, can’t see her leaping of the listing sheets with that level of info……………..   Thanks to Ian McDonald for the listing heads up.

Do we know any more about her?

 

 

Mystery Launch   08-11-2017

Unknown

Mystery Launch   08-11-2017

Long overdue for a good b/w photo & a mystery launch story. The above photo is ex Lew Redwood’s fb page, where Len commented that it was taken in 1916 & that the launch has BJB on the bow.

Using my enlarging capabilities on my computer, I think it actually says BJ6 – if that helps anyone ID the vessel?

Input from Harold Kidd – 

BJB was a 24 footer owned by Fred Brown of Ponsonby. My guess is that “B.J.B.” was his wife’s initials and that she had a previous name too. Haven’t had time to research that….Fred Brown is a hard name to track.
This image was taken at the Ponsonby Cruising Club’s Regatta of March 1916.
In July 1916 Brown sold her to C. Humphrey of the Hokianga and she was “railed up”. Odd that, because the railhead to the north was at Te Hana in 1916 and she might as well have been railed to Helensville. Surely she didn’t negotiate the Kaipara and the Hokianga bars. Both were pretty evil even then.
Any clues on what happened to her on the Hokianga apart from an obvious name-change?

 

Jeanette

Screen Shot 2017-11-06 at 1.04.08 pm

Screen Shot 2017-11-06 at 1.03.57 pm

JEANETTE

Jeanette was built in 1914 by Lane & Brown, she measures 30’ LOA , with a beam of 7’9” & draft 2’6”. Power comes from a 73hp Nissan SD23 diesel engine, that allows her to cruise at 7-8 knots.
Presently moored at Sandspit / Kawau, her trademe listing states that she is a part of Northland History. What that means we do not know, hopefully some of the woodys & supply more intel on her past.

Harold Kidd Input – Well she was at Tutukaka for years then at Taipa. She may have been built by T.M. Lane & Sons at Mechanics Bay but not by Lane & Brown at Whangaroa who dissolved their partnership around 1902. T.M. Lane & Sons transferred their launch-building to Mechanics Bay in 1905 after they built SLIM JIM.

Skagen

Screen Shot 2017-11-02 at 7.58.22 am

Screen Shot 2017-11-02 at 7.58.32 am

Screen Shot 2017-11-02 at 8.00.36 am

Screen Shot 2017-11-02 at 7.58.48 am

SKAGEN

One for the workboat woodys today, Skagen is a 36’ Danish double ender, built by Salthouse in 1973. She has a beam of 10’7” & draws 4’11” with a carvel kauri hull. Powered by a mighty 5LW Gardner diesel, 4 berths in 2 cabins, toilet, gas cooker, radar, 2 x GPS chart plotters, depth/fish finder, autopilot, hyd. steering, electric capstan, easy walk round side decks, wheelhouse side doors, steadying sail.  A very salty ship that you would feel very safe in.

She spent over 10 years in commercial fishing on the East Coast & has recently been restored.

Look at the Kim Kardashian backside on her – that’s a work of art 😉

Thanks to Ian McDonald for the heads up on the trademe listing.

Input from David Glen –  Skagen’ was moored in the Whangapoua Harbour, off Matarangi Wharf, for the best part of the last 20 years. She was owned by a local resident who worked in the local forests. She caught my eye at Matarangi in 90’s and she appeared to be well maintained, but seldom used. She looks good in the pics.

Merlin – Sailing Sunday

Unknown-4

Unknown-1

Unknown-2

MERLIN – Sailing Sunday

I recently received a note from Andrew Hewitt from Ashburton, concerning his 22’ yacht Merlin. Andrew became custodian of her three years ago, when she was put up for sale by a broker on behalf of her former owner’s widow (Peter Beaven, a notable Christchurch architect and heritage advocate).

Peter had had her hull restored professionally in Christchurch some time previously, but the earthquakes and his ultimate death intervened. Andrew completed the job, rigged her and commissioned a trailer for her locally. So she’s now, home from the sea in her retirement – converted for use as a ‘trailer-sailor’ and lives protected from the elements in a boat shed at Lake Hood (just east of Ashburton) – where Andrew sails her when time allows.

Andrew commented that Harold Kidd kindly supplied a little history on her and Les McBean (Dunedin) also did a quite an extensive one (link here Les McBean Merlin), but unfortunately they contradict each other J According to Les, it seems she dates from around 1902 by Mr Derwent Aitcheson of Waikouaiti, where she was originally a fishing boat fitted with an engine. She appears to have been based there and Moeraki, moving about in the general Otago area. At some time mid-century she was converted to a yacht, and was well known in Otago Harbour for some decades, prior to becoming derelict and ultimate salvation by Peter Beaven.

The registration number seems original (V9) – it is on an old cotton sail that came with her.

Like all woodys, Merlin’s restoration is an ongoing thing….. the photos above ange from the fitting out/rigging stage at Andrew’s home to an early pic of Andrew under sail at Lake Hood.

Andrew is keen to discover more on Merlin past, to date he has made one or two connections through the Canterbury Classic Boat meets and tried both the Port Chalmers Maritime Museum and the two yacht clubs down there for info, but nothing forthcoming. The Museum at Waikouaiti knew of the builder, but didn’t supply any info when requested.

2017 Centreboard Cup – Herne Bay Yacht Club – Sat 9th Dec – Sloanes Beach, Herne Bay

Screen Shot 2017-11-03 at 2.58.42 pm

Pencil midday on Saturday the 9th of December into the diary, the Herne Bay Crusing Club are hosting their legendary Centreboard Cup Regatta. Its one of the coolest sailing events in town & the venue is rather special.

Details here   http://hbcc.net.nz/centreboardcup2017/

And check out my photos from a previous regatta. https://waitematawoodys.com/2015/12/20/whats-the-coolest-yacht-club-10-minutes-from-queen-st/

Anyone Looking For a Wooden Mast?

The Herne Bay Cruising Club have a 31’6″ laminated, hollow wooden mast that needs a home, the price will be very attractive if its for a classic yacht, if you want it as a flag pole expect to pay more 🙂 email Andrew Mason at    a.mason@auckland.ac.nz

 

 

Out At Kopu

DeodarPatricia Jane

OUT AT KOPU

Above are a couple of ex work boats hauled out at Kopu – Deodar & Patricia Jane. The photos were sent in by Baden Pascoe from a recent trip to the Coromandel.

Deodar we all know & has been featured on WW before but what do we know about Patricia Jane? she is a rather large old girl – Baden commented that she looks like a converted South Island fishing boat.

Great story tomorrow on a rather stunning yacht that has been brought back to life & now calls Lake Hood (just east of Ashburton, South Island) home.

27-05-2019  Input from Julie Moore. – Julie advises that her 80 yr old father, Kevin Probyn used to own the Patricia Jane. He had been looking for his old boat for some time,  wondering what had become of it. And they discovered the photo on WW. He purchased it in1970, from Picton where it was built. It’s a 50ft kauri ship & had a Gardner 8L3 engine. Kevin had it based in New Plymouth as a trawler and owned it for about 3 or 4 years, when he sold it to an outfit in Hawkes Bay.

 

What Happened to Calypso?

Unknown-6

Unknown-2

What Happened to Calypso?

Firstly woodys, I love this story, way too many woodys have had a false start on a wooden boat project & just walked away & given up on old wooden boats forever. Well folks I can tell you Nick Davidson, who sent me the above photos, is not one of them, he bounced back, but more on that later – the main focus of this story is to try & uncover the mystery of Calypso. I have re-produced Nicks letter to me below – enjoy 🙂
Hi there Alan, have been thinking about an old kauri launch that I used to own back in the 1990’s, wondered what became of her and thought that perhaps one of your readers might have some information.
It is a story of hope turning to despair, however without the tough stories and the failures I suppose you don’t end up learning much!
As I am sure with many of your readership I was one of those guys that wanted to get into a wooden launch, however at the time had not much in the way of cash. It was mid 1999 and I was looking at boats for sale on ‘trademe’ as you do and there was an advertisement for an old 40’ kauri launch that was sitting in a shed in Avondale, Auckland and urgently looking for a new home, so I went along and had a look.

Basically the deal was that the owner of the shed wanted the building back and there had been veiled threats of chainsaws at dawn. As you can see from the photos of Calypso (very unlikely to be her original name) she was in a sorry state. The diesel was gone and there was a fair bit of rot in the house, but the hull looked sound enough and I could not help but fall for the straight stem (made of Pohutukawa) and fantail stern. The information about her provenance was next to nothing, no numbers, or name plates to be found anywhere. I was told that she was used as a ‘long-liner’ working out of the Viaduct for some years and had a build year of 1905 but have never had that corroborated. The diesel disappeared by way of a chainsaw through the cabin roof and she had then been hauled and transported to a storage unit in Avondale.
As it happened I had access to the old Education Department’s disused central stores warehouses that used to back on to the Avondale College, perfect I thought. I arranged for Calypso to be moved there, paid the princely sum of $300 to the owner (no recollection of the name of the chap) and now owned a 40’ launch that needed a bit of work!
Unfortunately, the arrangement to use the old stores warehouse fell through after a few months and I had her moved out to the Marine Haulage yard in Te Atatu where she stayed for a year or two. During that time I went into a boat partnership with a mate and with unbridled optimism we started stripping her out and removing what was left of the paint on her hull. When the cost of keeping her in Te Atatu became a bit too much for our shallow pockets I managed to find an old vegetable storage shed out in Bombay close to the Pukekohe turnoff and away she went again.

With the assistance of an old boat builder (again I cannot recollect his name, but he lived in Tairua, was involved in relocating the old Ngoiro ferry there, drove an old red van and had a cat that used to accompany him around the country!) we removed all the caulking, over many months slowly jacked up the hull to remove the hog in the keel, splined and glassed her to the gunwale with 10 weight triaxial glass. This was all done over a long period as time and money permitted.

As with many of these sorts of projects, in spite my best intentions and a fair degree of bloody mindedness we found ourselves some 6 years on with a sound hull but a long way from ever getting her back in the water. We had by now removed the cabin and decking which was in a much poorer state than first thought, my circumstances had changed and I no longer had the time or the financial resources to take her any further. We also had to move her again and by about 2005 she was now residing in a factory unit off Mahunga Drive in Mangere.

After a great deal of soul searching the decision was made to put her on ‘trademe’ and eventually she was purchased by a chap who described himself as a boat builder and if my recollection serves me correctly was looking to move her up to the Kaipara Harbour where he had a property and complete the re-fit there. Although disappointed that I hadn’t ever seen her in the water, I consoled myself that we had moved her along and that with the new owner’s intention to complete her she would be saved.
That was the last I saw of her!

Whilst owning Calypso had not dampened my desire to own a wooden launch I was certainly much wiser to the challenges, the cost of such an enterprise and in fact promised myself that if I ever did buy another boat she would have to be floating, have good provenance, and be at least structurally sound.

As it happens my wife and I now own the 1951, 32′ Allan Williams sedan launch Juanita (she has been well covered in Waitemata Woodies), she is a joy to own, gets plenty of use and after a fair bit of work is in great trim. The lessons learned from Calypso although painful have served me well, but I do sometimes wonder what became of her and whether the chainsaw got her in the end?

The photos above of Calypso in the water and being hauled were given to me by the previous owner.
There are a couple of her showing where I got to before having to sell (as you can see she was basically back to a bare hull) and a couple of a scale model that I made of her when I was looking to see how a new cabin would look.

Well woodys, as you have read, Nick & family are re-born woodys, we like that – so can we help Nick sleep better at night 🙂 & confirm what happened to Calypso. Good time for our resident Kaipara woody, Zac Matich, to chip in ………………..

Photos below of Juanita leaving Greg Lees (Sandspit) boat shed after a serious spot of TLC. Link below her time in Greg’s shed.

The rebirth of Juanita

Juanita b

Juanita a