Rawhiti was designed and built by the Strongman Brothers in Coromandel in 1962, originally as a fisheries inspector vessel. She at some stage moved to the Kaipara where she was used as mother ship for a mullet fisherman.
She is a very capable sea boat with a fine entry forward, generous hips amidships and a flat run aft. She has a nice flair and a tumble home transom. At 28′ x 8.5’. Powered by 49 hp 4108 Perkins she cruises comfortably at 8 knots.
Her present owners have had her for 12 years and taken many trips to the Great Barrier, Bay of Islands and fishing north of the Poor Nights.
Her owners are boat builders & had planned to remove the cabin and replace with something more flattering to her hull quality. However they preferred to invest the money on beer and bait 🙂 The cabin is functional with full height headroom forward to the galley and steering station. The above photos were taken recently when hauled out at Snells Beach.
I understand she was / is for sale. Any woodys able to expand on her past?
The above photo was taken 2 weeks ago at Auckland’s Maritime Museum, La Rosa & John Dory had just returned from the CYA launch cruise to the Riverhead hotel & according to Baden Pascoe they all rafted up alongside Kelvin for afternoon tea, I suspect the word ‘tea’ covered a wide selection of beverages 😉
How lets see how clever you woodys are – these 3 vessels share one connection – who will the first to ID it. And it goes without saying that Ward House, Baden Pascoe & David (Davie) Jones are excluded 🙂
Kevin sent in the above photos yesterday of Zircon & it got bumped to the top of the ww posting list for the simple fact that he has done a top chop & lost the flybridge 🙂
When purchased, a few months ago, she very run down & Kevin has wasted no time in giving her a make over.
Not a lot is known about Zircon & her name is probably not her as launched name.
She is 34′, powered by a 6 cyl. Perkins & built with glue edged carvel planks. Her previous owner understands that she was built in Whangarei in 1959 as a commercial fishing boat & based in Coromandel.
Prior to Kevin’s purchase, home was W Pier at Westhaven.
Todays challenge woodys is can we shed some light on Zircon’s past? – design, builder, previous owners / names etc
Photos below are as purchased
20-04-2016 – Roger Turnbull sent in the three photos of Zircon below. One of them shows the coamings and flying bridge as it was when Roger purchased her.
19-01-2018 Update
Ewan Kerr emailed in the 2 photos below of Zircon, taken when his family owned her. They bought Zircon in February 1986 from a gentleman by the name of Athol Myers who at the time would have been in his 70’s or 80’s. They used the boat as a family cruiser and sold Zircon in March 1988.
Vesper is a rather special Kaipara boat having been in the Matich family for 3 generations. Powered by a 4 cylinder Ford diesel. She appeared on ww back in 2013 but Pam has recently sent me the photos of her hauled out at Pahi.
Maybe Zach can chip in with some more details – builder, year etc?
Harold Kidd Input
VESPER is clearly a “settler’s launch”, one of hundreds built in this exact style by Chas. Bailey Jr in the main, but also by Bailey & Lowe and other Auckland builders. They were in the mould of the launch MILKMAID, built by Chas. Bailey Jr in late 1901 for use on the Hauraki Plains for carrying produce out and supplies and people around the rivers of the district. They were usually around 32ft loa, diagonal built for maximum internal volume and could carry several wool-bales under that tall dee-front cabin top. Many are still soldiering on these days. In an article in the Northern Advocate of 2nd July 1988 the history of VESPER was discussed, putting her at 1905, which seems about right, and talking about her lengthy ownership by the Matich family on the Kaipara for fishing and towing, and earlier with Capt. A.V. Subritzky as skipper.
Update 17-10-2016 – photo of Vesper sitting on trailer at Hobsonville Marina, Mon 3rd Oct. Where she was off to was unknown….. ? photo ex John Wicks
photos & details ex Peter Murtons. edited by Alan Houghton
This old 1895 fantail oil launch was built by the Knewstubb Brothers in Port Chalmers as a tender for one of the many gold dredges they built for the Shotover and other Rivers. She has been a motor boat with 3-4 different motors having been in her going by the amount of exhaust holes that were found in her. The original bronze stern tube was still in her but had been cut off flush with the hull inside and out then plugged. She may have had another plank on the topside when first built as there is no deck fastenings in the original stern and the top has unfinished adze marks still very visible on it. When Peter striped her down, all the ribs were finished at the green plank line (under side of deck as she is now) all the ribs were rebated to take the shear clamp and the transom had a rebate for the deck. Sometime in the 1950-60s she was converted to a keeler, with another 300mm + a lump of railway iron added to her keel and another plank added to the topsides and cabins were added (refer photo above). This was all held on with galv. nails skewed down into the shear clamp and transom and bits of copper sheet wrapped around the stem.
In the early 1980s she sank in the Frankton arm of Lake Wakatipu. She was then taken to Cromwell for 15 years then to Alexandra for 10 years as a garden ornament.
She is 16ft Kauri hull, the ribs and sawn frames in the counter are Broad leaf and Kowhai all the yellow topsides and cabins were put on 1950-60s when she was converted to sail. At some stage two planks were replaced and she was then glassed over with polyester. This caused her to sink as the garboard plank on the starboard side buckled and cracked due to uneven moisture levels on the garboard planks.
Peter has re ribbed her with oak, new oak sawn frames, both garbed planks are new and 1st and 2nd planks port side were replaced due to a very rough repair job done on her some time a go. A new Kauri stern was also fitted. The new decks are Kauri. While cleaning out the old strong post notch in stem Peter found an English penny dated 1895, this is not original as it was well worn, if one was put in her at all when she was built, it would have been a new sixpence or shilling. She is all copper fastened and all the old iron keel bolts have been replaced with copper. The new decks have a sub layer of 6mm ply to strengthen her for trailering her. All the fastenings were removed so they could clean out between the planks then a flexible sealer was applied between the laps prior to re-riveting the planks back together, this allows the planks to move shrink and expand without leaking every time we want to use her.
Blue Duck is now powered by a Hasbrouck twin steam engine, fed via a black staff water tube boiler Peter built for her. She can swing her 17×30 prop easily.
Todays post features Revenge, an ex Kaipara Harbour work boat, converted to pleasure use. Her new owner Michael has just relocated her to Lake Rotoiti & she was relaunched there last Thursday (01-10-2015), photos below. Her details are as passed onto Michael so he would love to get clarification & if possible uncover more on her past. Revenge was built 1905 & is a carvel planked counter stern design, made from kauri with puri cross floors and pohutukawa ribs, fixed by copper nails and roves. Originally she had a mast which is now on show at the Matakohe museum
She is 36′ LOA with a 12′ beam & 3′ draft. Engine is 6.2 litre D-Series Ford truck engine 150 HP matched to a Newage gearbox. This all turns a 22″x18″ prop.
Until recently she spent all her life on the Kaipara Harbour. Early configuration was a small wheelhouse up front, with the deck fitted for cream can collection throughout the Kaipara Harbour. Its also believed she hauled logs throughout the Kaipara Harbour.
Her previous owners (from 1965) had her rebuilt in 1995 with new floor boards, wheel house and engine as per the condition you see today, for live aboard retirement cruising of the Kaipara.
Revenge will be a welcome addition to the Lake Rotoiti classic fleet.
So woodys what do we know about her – Zach what do the Kaipara guys say?
Launch Day – Lake Rotoiti
Harold Kidd Input
All I have is that she was built by Thompson at Aratapu in 1905 as a sailing fishing boat for Morgan Bros who sold her to Edgar Brown who sold to the Fisheries Department around 1930. She was skippered by Bunny Tilby as a fisheries protection vessel. In 1942 her then engine, a Kelvin Ricardo 24-30hp diesel, was removed and sold by tender. The Department sold her to Tilby in 1948. He sold her to Colin McPike who sold her to Bill Pook who sold her to Bob Moyle in 1968. Moyle converted her into a pleasure launch. A lot of that is from the Matakohe Museum’s archives and may be pure anecdote.
ps I have since found confirmation that The Fisheries Branch of the Marine Department bought her in late 1930 and fitted the Kelvin-Ricardo in October 1930. That probably replaced the Twigg. The Kelvin-Ricardo was a “paraffin engine” rather than a diesel.
Zach Matich input
I know early on she had a Twigg 40hp in her, and I think she was towing metal from Green Hill for the Hobson county. She has very full underwater lines especially in the bow area,my great uncle said that she used to pound badly in a head sea so much so that all that was left on the cup hooks in the galley were the handles!! Bob Molye had Eric William convert her to pleasure ie new cabin,bulwarks and hull work etc. The Ford came out of one of our family boats which Bob brought just for the 6 cylinder ford and on sold it with Revenge’s old 4 cylinder ford. I’ll have a dig for some photos
Zach photos below 🙂
08-10-2015 Update from Michael Marston
Michael just sent in the photo below which he received from the last owner, who bought her from Bob Molye (who had her from circa 1965 – 2012).
Only the hull looks familiar, with the wheelhouse looking as though it is back-to-front compared to today.
Michael is hoping the picture will jog more memories, with stories to flow onto ww.
As for the where about’s of her mast at the front (see photo), one story has it as a flag pole on a front lawn at Tinopai whilst someone else says it is at Matakohe museum. The good news being it seems the mast still exists in the area.
Harold bought the old postcard that the above images are from. It’s obviously a Waitemata working launch with that fender on her bow but he can’t place the launch, any woodys able to help?
The reference to the ‘winning crew’ might mean it was a fishing excursion & possibly the ‘Mr. Davenport’ was the boss.
Zoomed in pic of the boat
Input from Chris McMullen
Could be the “Sambo” ? Was sunk at Nagles Cove in the 1960’s. Raised by Maurice Palmer and taken to his yard at 15 Clarence St Devonport. I worked on her as an apprentice boat builder. No idea of what happened to her after that. Harold Kidd Reply
I hadn’t thought of SAMBO (or her sister JUMBO) and Chris is likely to be right. Both were built for Bentley & Pearce, later Auckland Towboat Co, by Tom Le Huquet around 1915-16. I last saw SAMBO (or was it JUMBO?) at the Paeroa Maritime Museum maybe 25 years ago. She was lying outside, a bare hull painted Union SS Co green and seemingly still sound. Someone out there will know where she is now, Baden/Russell in particular. Was it Barry Brickell who was going to install a Simpson Strickland steam plant in her? Or am I conflating stuff? Photo of Sambo below, ex Barry Davis, that he took in 1973 on the hard stand at Half Moon Bay.
Meola is one of those boats that no matter what angle you view her, she just looks right. Built in 1961 by Miller and Tunnage at Port Chalmers for the Ministry of Works. Her job was the servicing of Marine Dept. & Navy installations around Waitemata Harbour & the Hauraki Gulf. She is 42’6″ LOA with a 12’7″ beam. Her engine is a 4L3 Gardner that sees her comfortably cruise at 7.5>8 knots, using 1L of fuel per mile.
In 1976 she changed hands & was taken over by the NZ Navy.
When decommissioned by the Navy she was converted to a pleasure boat & is now a very salty launch capable of coastal cruising. Her current owner has recently rebuilt the wheelhouse, rewired her, installed new ‘plastic’ water tanks (700L). She carries 600L of fuel (s/s tanks).
Her galley & engine room have also been revamped. As you would expect she sports all the electronic & safety gear needed for coastal passages. Also installed are solar panels & 12v refrigeration to support the engine driven compressor frig / freezer.
Sleeping is a very comfortable 4 berths, being 2 forward bunks, a skippers Queen size bunk & a very cosy ‘winter’ bunk alongside the Gardner.
If you wonder why I’m being a little OTT with details, thats because her owner has decided that sail is really his thing & wants to see Meola move onto a good owner.
You would struggle to find a vessel better suited to either mooching around the gulf or coastal cruising to the Bay of Islands or Marlborough Sounds. Most of you have heard me rabbit on about the concept of the ‘floating bach’ – well Meola is a boat that fits that role perfectly & you could own her for less than a 1/4 the price of a bare coastal section. AND – she is a serious looker 🙂
If any woodys out there are looking for the perfect floating bach or know someone that is – contact Bram Cone at coneco@xtra.co.nz
Mason Bay (originally named San Guisepp) was built by Curnow & Wilson c.1956/57, while she has spent most of her life as a work boat she is now a very comfortable pleasure craft.
Details: LOA 14m, BOA 4m,.DR 1.5m 22Tonnes, 1500l diesel,800l water. Engine is a 6BD1 ISUZU 3 with a Capitol box, prop = 29in X 17in. The hull is 3 bl. 32mm Kauri copper fastened on 3 stringers/side. Below is a summary in chronological order of her life – her present owner Gary Underwood would like any input to confirm or add to these details.
To view more details on her & the restoration visit gazzabomasonbay.blogspot
HISTORY OF MASON BAY
1956/7 Built Curnow and Wilton, Nelson for Tony Bonica, Island Bay Wellington as a day fisher. Launched as “SAN GUISEPPE”. Powered by a Lister JP3 (tbc) 1974 Ian Boyce went to Napier as she was for sale as “MARY LW”. Owned by Willy Watson. Had a Fordson (6?) and the Capital 3:1 1974 Late 80’s in Port Chalmers. 1978 Big NE blow (see newspapers) and 8 boats caught off the Nuggets, Otago bar closed “SEAWITCH” (sistership to DORADE) lost with 2 crew, Warren Wilson skipper & Les Walker (leadboots) MASON BAY all ok. ( Not sure if those 2 guys were on Mason Bay or Seawitch) 1985 Big refit at Miller and Tunnage. new bulwarks, and the 6BD1 Isuzu was installed with the 3:1 Capitol box. Then sold to a Mr. Hall in Nelson/Motueka. He also had “PEARLY SHELL” I believe 1993 Bought by Ian Boyce (from whom a lot of this info comes). Based in Tauranga with the “SEA BEE” and fished tuna off the west coast of the South IS. 1995 Sold to “Blondie”who had her for 2 years and ended up in Bluff 2001 Seen and photographed fishing in Lyttleton Hbr. 2007 Bought by Russell Keen from a finance company. 2009 Sold to Gary Underwood 2010 Motored north to Whangarei in Jan. 2010 May – hauled at Norsand boatyard for refit/rebuild and conversion to pleasure. Shipwright was Marcus Raimon 2012 Re-launched and now home port is Whangarei Town Basin.
THE RESTORATION OF AKARANA Details & photos below ex Dick & Colleen Fisher. Edited by Alan Houghton. Above photo ex Dean Wright
Akarana was designed by A.J. Collings & built by W.G. Lowe in 1960 for the Port of Auckland. They sold her 34 years later in December 1994 to Peter McDonald of Whangarei, Peter (deceased) was a long time friend of Dick Fisher & Dick purchased Akarana off Peter in April 2000. Akarana is built using single skin 1 ¾ inch thick Kauri planking on spotted gum ribs with a hardwood keel & her displacement is 42 ton. W.G. Lowe had the contract to build her & allowed 23,000 man hours for her construction. When Port of Auckland sold her in 1994 she was on engine #6, having worn out 5 engines while working for the Auckland Harbour Board. From a couple of her log books that Dick has he would estimate that she has traveled somewhere between 600,000 + 700,000 miles during her working life as a pilot boat on Auckland harbour. The 8L3B Gardner engine which Dick re-built was originally installed in an oyster dredger based in Bluff. This engine was built by Gardners in 1960. The same year as Akarana. She cruises comfortably at 10 knots. After purchasing her, Dick took Akarana to his workshop at Kamo & then constructed a shed over her. You will see from the photos that shed is a little bit of an understatement 🙂
The photos below will give you an insight into the scale of the project & the stamina, patience & dedication of Dick Fisher in undertaking this restoration. Akarana is a magnificent vessel & a visit to her engine room normally sees most males gob-smacked at the attention to detail & cleanliness that would equal the finest medical operating theaters.
In additional to being a very skilled artisan, Dick is just a seriously good bloke, he once drove down to Auckland from Whangarei so I could show a visiting classic boater from the USA, who was a Gardner nut, over Akarana. You would struggle to find a more hospitable couple afloat than Colleen & Dick Fisher. One day I’ll post on ‘Hamel’ the Fisher families other wee ship 😉
I have captioned the images – scroll over to view, also remember you can enlarge a photo by clicking on it.
At the bottom of the post (part two), for your interest I have included some papers that Dick acquired from the old Auckland Harbour Board.
A. Harbour masters comments prior to letting tenders. B. Some of the requirements for the construction of Akarana. C. AHB reviewing costs. D. Breakdown of building costs. E. Copy of daily log, note the totals for the month of July 1982 were 278 pilots, 510 hours running, & 2791 miles.
Photos below during her build at W.G. Lowe in 1960
W.G. Lowe 1960
W.G. Lowe 1960
W.G. Lowe 1960
As sold by Auckland Harbour Board – 1994
At Westhaven,as sold, Dec 1994
The restoration
April 2000 as purchased by Dick F
Arrives at Kameo
New shed at Kameo
Blasting paint from hull
Blasting paint from interior
Paint off
Old engine removed
Rebuild of wheelhouse & cabin top
Rebuild of wheelhouse & cabin top
New bulwarks
New laminated beltings
Re caulking
Steering compartment
Steering compartment
Teak deck – 1&3/4″
Hatch
Funnel
Some bling
Almost finished
Business end
Rebuilding the engine
Rebuilding 8L3B Gardner
Rebuilding 8L3B Gardner
Rebuilding 8L3B Gardner
Installing engine
Gearbox
8L3B Gardner Installed
Relaunching
Leaving Kameo shed
Ready for launching
New home at Kissing Point Whangarei boatshed
Back in her happy place – April 2005
At home, 2005
Supporting paperwork
Helm Photos
10-04-2018 Update – Photo below of Akarana on launching day. Photo sent in by Paul Drake, taken by his brother Michael.
Update 09-01-2021 – Photos below of Akarana in Kent Passage, Bay of Islands – 6th Jan , sent in by Grant Anson
