Author Archives: Alan Houghton - waitematawoodys.com founder

Unknown's avatar

About Alan Houghton - waitematawoodys.com founder

What is Waitemata Woodys all about? We provide a meeting point for owners and devotees of classic wooden boat. We seek to capture the growing interest in old wooden boats and to encourage and bring together all those friendly people who are interested in the preservation of classic wooden vessels for whatever reason, be it their own lifestyle, passion for old boats or just their view of the world. We encourage the exchange of knowledge about the care and restoration of these old boats, and we facilitate gatherings of classic wooden boats via working together with traditionally-minded clubs and associations. Are you a Waitemata Woody? The Waitemata Woodies blog provides a virtual meeting point for lovers of classic and traditional wooden boats.
 If you are interested in our interests and activities become a follower to this blog. The Vessels Featured The boats on display here (yes there are some yachts included, some are just to drop dead stunning to over look) require patrons, people devoted to their care and up keep, financially and emotionally . The owners of these boats understand the importance of owning, restoring and keeping a part of the golden age of Kiwi boating alive. The boats are true Kiwi treasure to be preserved and appreciated.

A.H.B. / KELVIN

Posted on by
2

A.H.B.  /  KELVIN

A.H.B. is 1907 Chas Bailey Jnr, 3 skin Kauri and 39ft., she was built for the Auckland Harbour Board hence her name A.H.B….Once she was sold out of their ownership she was renamed Kelvin and spent most of her life called that, her current owners, the Pollard brothers, we put her back to her original name.
Paperspast says she’s worked alongside Ferro in the early days, even receiving Ferro’s old engine at one stage. Also that she was leased to the police during night time hours for patrolling the harbour in 1911.
She was transferred to the Manukau and used by their harbour board for quite some time there before being sold off eventually.

The old stern on photo (supplied by Harold Kidd) is thought to be before or after the shot of the other old photo (ex Paperspast ) which caption says she was being returned to the Waitemata to be used in cray fishing industry 1933. Refer b/w photo/caption below.

Some info supplied by CYA member Baden Pascoe even has her fitted with two engines in the late 1940’s. Both shaft logs are still installed but plugged off.

She was also owned for a time by by boat builder Dave Jackson.

For a while she languished amongst the derelict boats down in Waikawa, then she was sold and steamed to Mana where she was forgotten and almost met her end via chainsaw before the Pollards rescued her, got her running / floating  and bought her  back to Auckland.

She’s powered by a D series Ford with a hydraulic box and is berthed at Panmure. She is mobile but she is a project boat requiring plenty of work and a loving owner to take her to the next step.

The Pollards boys – Andrew & Cameron have rescued more classic motor vessels than anyone I know, I have heard Harold Kidd say on numerous occasions “the their blood is with worth bottling”.
Like all of us, there are only so many toys you can fit in the box so A.H.B. is looking for a new owner / home – initially contact me on waitematawoodys@gmail.com

as always – click on any photo to enlarge 😉

Okahu Bay Late 1950’s?

Posted on by
13

OKAHU BAY LATE 1950’s?

Timespanner photo & details ex Russell Ward  

Left to right, who can name the launches?
Russell feels  the photo most likely dates from the late 1950’s as over at the Devonport Naval Base, the minesweeper Stawell is alongside, astern of the Loch Class (Rotoiti?) and she was put into mothballs July ’59 which means she would have been moved inside the wharf.

Chris McMullen’s Herreshoff Steam Launch – Part 1

Posted on by
7

Chris McMullen’s  Herreshoff Steam Launch

I visited a rather special boat shed the other day, shed is a bit of an understatement – I have a shed, Chris McMullen’s one is more like an aircraft hanger.
The reason for the invite was to have a look at the 1933 Colin Wild built launch Wirihana out of the water, but what really made me accept the invite in a flash was the chance to view the 34′ Herreshoff steam launch that Chris has been creating for nearly 30 years.
I use the term creating because every piece of this boat (including the steam engine) has been crafted by Chris’s own hands. Its a little way off launch day but already its a piece of art.

Why would someone undertake a project of this magnitude ? Chris’s view is “the whole project is an engineering exercise and an interesting challenge to recreate what was done 100 plus years ago.  Further, traveling on a fast steam launch is a great experience and there is something about generating your own power from fire and water”.

Click any of the above photos to enlarge 😉

I’ll let Chris tell the story – read on

“I have been building this (lets say) machinery and boat on and off for would you believe 27 years!  I started the project in 1987 –88 the year I sold McMullen & Wing Ltd.  Unlike some of my steam friends in the USA and the UK who are single minded,this has not been my only interest, during the time I have owned or had the use of other boats and done many other things.
The long winded project, is an embarrassment for me being a professional boat builder. It must be explained that I am not a trained Engineers Pattern Maker,  Foundry Moulder, Fitter and Turner, Coppersmith or a Boilermaker. I have had to learn these skills. Believe me, the Herreshoff’s draftsmen certainly did not compromised his design to make it easy for manufacture.  The castings for the engine are complex and thin walled. Several foundry’s kindly allowed me to do my own sand moulding on their premises. It would never have been possible without their cooperation.  I have had four attempts at casting the crankshaft. The only good casting (currently installed in the Engine) is of material not up to spec.  This has been a major blow and I guess my knowing this has set back the job.
The 3 throw crank has been drawn in “Solid Works” with the idea of machining it from a solid 9 inch diameter bar of steel on a NC lathe and Mill. A huge job and still can not be completely finished on these remarkable machines. At this stage there is no way to change the design. Crazy, the original was cast and machined in steel over one hundred years ago!
I went on and built the 34’ x 6’ 3” x’ 1’10”hull exactly the Herreshoff way (with a mould for every White Oak steamed frame) The hull double planked carvel style and glued with epoxy rather than set in shellac (as was the original) The planking was two skins of 5/16 NZ Kauri. So thin it could not be edge set. On the bilge the planks were made from thicker stock as they had to be backed out (hollowed and rounded) Very easy to loose control of thickness doing this and I believe Herreshoff Manufacturing (some how) steamed the round into the planks. I have a steam box, experimented but could not make it form the planks. I could have built the same boat double diagonal in a fraction of the time but the design scantlings would have had to be changed. At the time I wanted an exact replica! To what end? Now, I am not sure. (See below Vapor)
Anyway, the hull is basically finished with the boiler engine and water tank installed ready for the plumbing.
For those interested the design is HMCO design # 263 it was built 1908 as the Starboard launch for the Beautiful Twin Screw Steam Yacht “Cassandra”  Cassandra was built for an American owner by Scott’s at Greenock. Scotland in 1908 .She was 238 f.t O.A.L and could travel at just over 15 knots. Her tender was designed and built in the USA would have been “State of the Art” at the time and most likely the fastest launch available.  It would seem to me there were excellent Steam Launch builders in the UK. Simpson Strickland and Liquid Fuel Engineering (Lifu) and others but the owner chose the Herreshoff design / build. I have a copy of a letter written by Francis Herreshoff (the designers son) stating these launches could do 14 knots. To many, that seems unlikely but I have been on two Steam launches on Lake Windermere that can do  13 knots, so lets say we do not know.  These launches are proportioned closer to a rowing eight than a normal hull. On design #263 The boiler pressure is 250 PSI  The propeller is four bladed 22 x 30 inch pitch. the Hull and machinery is light. The shaft is low angle and the weights well forward.  The speed and shape of “Vapor” a similar steam launch has been discussed at length on Wooden Boat Forum  I have never got involved in the discussion but I am very familiar with “Vapor” and know the owner. Ed Louchard a boat builder from Port Townsend has done a wonderful job of building a replacement hull.  Vapor is the only surviving Herreshoff Steam Launch. The hull had been re planked at some time but the machinery is all original. Regarding “Vapor”, when I started my project I thought there were no Herreshoff Steam Launches in existence. I tracked down” Vapor” and her friendly owner in California about 12 years ago. Now she has been rebuilt it sort of makes my replica surplus.  In some ways procrastination has helped as more information about these remarkable launches comes to light from all over the world. I have enjoyed the research but now I am looking forward to finishing my project but it does get harder as one gets older”

Part 2 – The building of a replica 1898 Nathanael Herreshoff triple expansion steam engine –  https://waitematawoodys.com/2014/07/11/chris-mcmullen-herreshoff-steam-launch-part-2-the-engine/

Update on Vapor on the WoodenBoat Forum 24/07/2014

Vapor photos & kind words about Chris McMullen

http://forum.woodenboat.com/showthread.php?179519-Herreshoff-Steam-Launch-In-Auckland-New-Zealand&p=4235461#post4235461

And more Vapor – 25/07/2014

http://forum.woodenboat.com/showthread.php?179519-Herreshoff-Steam-Launch-In-Auckland-New-Zealand&p=4236325#post4236325

Maristella

Posted on by
10

MARISTELLA

Info from Harold Kidd & Mark McLaughlin

Maristella was a 40 footer, built by Sam Ford in December 1936 for Mr R.W. Wills of Epsom and fitted with a 50hp Ailsa Craig diesel. During WW2 RNZN patrol service she was fitted with a Gray for spares rationalization purposes.

Maristella was for sale recently and was advertised as having a 4-71 Detroit. She was renamed “Faye Michelle” for a time and has now reverted back to Maristella.

The b/w photo shows her on launch day & minus the flying bridge.

New photos – 12/08/2014

20-09-2023 UPDATE ex John Wicks – Maristella spotted berthed at Hobsonville Marina

Nana

Posted on by
12

Matiatia

NANA

thanks to CYA members Jason Prew for the colour photos & Nathan Herbert for the b/w (Papers Past)

BACKGROUND
Nana was designed by C. Bailey Jun. &  built by C. Bailey & Sons for Mr F Alison of Matiatia, Waiheke Island in1934 & launched in late November / December. She is 35′ with a 8′ beam & a 3′ draft. A day cruiser, all her controls were in the raised top amidships.
When launched she was fitted with a 100hp Redwing engine & expected to reach a rather speedy 17 knots. The photo above was taken on her sea trails, early Dec 1934.
Alison had her built for trips to town (Auckland City) & for taking friends out to the fishing grounds in the gulf.
As an aside, Alison sold his 35′ cruiser Makora, built to order 20 years early by C. Bailey to Mr Jas. Gordon of Awaroa Bay, Waiheke.

TODAY
Nana’ was hit whilst moored in a recent storm. She took on an undetermined quantity of water which partially flooded the Ford diesel 125hp engine which has now seized.
To quote the trademe listing the vessel has suffered reasonably extensive structural damage around the deck line, stern and aft cabin top & is currently leaking badly.
‘Nana’ is for sale ‘as is, where is’ on behalf of insurers at Orams Marine hard stand, Westhaven.
Now I’m not a boatbuilder but from the photos & feedback from those that have seen her the damage doesn’t look at all terminal.
This launch needs to be saved from the chainsaw & could be purchased for not a lot of money. The trademe auction closed yesterday, there was no reserve & the opening bid was set at $1,000, there were no bids.  So Woodys – anyone looking for a project ? Remember as well as being a looker she was quick. I don’t normally put trademe links up but Nana needs a helping hand.

http://www.trademe.co.nz/motors/boats-marine/motorboats/auction-747029166.htm

UPDATE 06/07/2014 – SHE HAS DODGED THE BULLET – NANA HAS A NEW OWNER

Lanai

Posted on by
19

LANAI

photos & details from trademe

LANAI was built by Lanes for Frank Pidgeon of the Ace Tyre Company in 1949. Frank was shifted from Christchurch to run their Auckland operation in the late 1920s and had a succession of great launches. Frank owned her until 1953 when Vic Bedford bought her. In 1965 R E Thomas and J S Menzies owned her. She was first registered with the APYMBA with a single 106hp Graymarine and with dimensions 32’6″x 31’6″x10’6″x2’9″.

She originally had 2 x 6 cyl. Graymarine petrol engines, but is now re-powered with 2 x 4 cyl. Leyland diesels.
She is  presently berthed in Tauranga, owned by a Mr Neil, previous owners include Owen Johnson, who had her for many years & kept her at Coromandel & sometimes at Ngatea, where he was a panel beater. Owen Johnson sold her to  Rotorua owner, who sold her to Mr Neil.

In her original form, there was no fly bridge & the coamings were a fairly light coloured varnish. Another great example of the Lane craftsmanship

12-09-2016 – Updated photos

Be Nice To Your Wooden Boat Builder

Posted on by
3

Be Nice To Your Wooden Boat Builder

Why? because in 2013 of the 97 apprentices that graduated from NZMarine ITO courses only 7% were in wooden boat building. That’s less than 7 wooden boat tradesman.

So who’s going to work on your classic when Geoff Bagnall, Greg Lee, Pam Cundy, George Emtage, Paul Tingey, Dave Jackson, Macro Scuderi & Peter Brookes hang up their tools?

Freelance

Posted on by
6

FREELANCE
Photos & details from Nigel Drake (owner)
Freelance was designed and built in 1964 by Owen Woolley for Ken Williams, an Auckland builder (Nigel thinks from Papakura).
She lived on a mooring in the Clevedon river but spent the summers in Tutukaka where she was well known with the game fishing fraternity. In 1978 Ken built Freelance II, a 45 foot Salthouse design (now also in Tauranga) and sold Freelance to Richie Hoban of Tauranga. Richie owned her for 32 years until his death in 2010. During the 32 years the family owned her they spent nearly every summer on the boat in the Mercury Islands and Great Barrier.
In 2010 she was put up for sale and Nigel purchased her in 2011. After a major refit she now continues to live in the Tauranga Marina at Sulphur Point and cruises the northern coast during the summer.

as always click photos to enlarge

Rorqual 4-Sale

Posted on by
1

RORQUAL 4-Sale

Rorqual was built c.1960 in Picton by Jack Morgan for the Perano family as a 39’3″ (12m) Tory Channel whaler chaser.  Completely rebuilt / converted in 1988 by then owner Tom Birsdall and boat builder Geoff Bagnall. She was also fitted with a completely rebuilt aluminum 380 HP 671 Detroit engine, that is fitted with a German turbocharger + the standard GM supercharger, all this pushes Rorqual along at a comfortable cruising speed of 14-16 knts. Top speed ? lets just say few CYA launches would beat her in a straight line.

Double diagonal kauri hull and sapele mahogany topsides with glass over ply decks and cabin tops, all recently painted. Hull and decks painted in 2013, cabin tops 2012.
Sleeps 7 but better with 4 🙂
Extensive upgrades & enhancements – check trademe listing for full details. http://www.trademe.co.nz/motors/boats-marine/motorboats/auction-706043302.htm

The seller has had another mid-life crisis 🙂 e.g. the toy chain looks like this –   Jetski>Launch>Caravan > Campervan, so now the launch has to go – thence the owner is VERY open to discussions around how you could own a piece of NZ’s maritime history.

email chrism@pix.co.nz
ph 021 961 936

Lady Claire

Posted on by
19

2014 West Park Marina
2014 West Park Marina

LADY CLAIRE

photos from Nathan Herbert & Papers Past, details from Harold Kidd & Jason Prew.

Lady Claire the 42′ bridge deck cruising launch was launched on 14th Oct. 1935. Built by Colin Wild at Stanley Bay for W.J. Reid of Herne Bay. Reid was Des Townson’s grandfather.

Lady Claire is currently owned by Bruce Carter. Colour photos at the marina.

 Harold Kidd Update

She was launched with a 160hp Lycoming but Stan Headland replaced that with a 105hp Kermath in 1952. G M Lagan owned her for a while around the 70s and Bruce Carter recently (still?). Lovely craft.
PS Wild used Lycomings around this time. WAIRIKI, the 39ft bridgedecker he built for L E MacQueen in October 1934 also had an 8 cylinder 160hp Lycoming, essentially the same engine as in the straight 8 Auburn car of the time.

04-07-2015 New Photo Below

Chris McMullen sent  the photo below in from his files. It was given to Chris by the late Des Townson. On the back is written  Lady Claire. 42ft OA Built by Colin Wild. For WJ Reid  1935. Who we know was Townson’s grandfather.
Chris once saw a photo of the same vessel on the wall of Des’s office. Hopefully someone has it still & a copy might surface on ww – a job for Bruce Tantrum maybe ?
Chris commented that when you look at both Lady Claire & Wirihana – one of the reasons for their good looks is the absence of safety rails forward.  These days health and safety concerns encourage safety rails which need to be one meter high as on commercial vessels to do much good, lower than that they can pitch you over the side. Wiihana is still ‘nude’ of rails but there are lots to hold on to on Wirihana.

Lady Clair (L) & Lady Eileen at Gulf Harbour May’14

Lady Clair (L) & Lady Eileen at Gulf Harbour May'14