The Minerva Talking with woody – John Wright the other day and he mentioned that he spotted an old framed photo in the dump bin at the Te Atatu Boat Club, a quick bit of bin diving reduced the photo, which John sent me a copy of and asked for more intel on the vessel – The Minerva, the photo is captioned – ?.N. Jones Family 1986.The rear of the family has a lot of detail, but sadly very hard to read – it says she was built by Chas Bailey, most of the other detail is just too hard to read. Well jackpot – Minerva featured extensively on WW back in March 2015 and we uncovered a lot about her provenance.Snapshot – built in 1910 as a Auckland harbour ferry, she had a very shallow draft for negotiating creeks and estuaries. Her original power was steam via a coal fired boiler, that fuelled two 14hp George Fraser & Son engines. Around 1922 she moved over to the Kaipara Harbour and worked there until the late 1940’s. Around this time she was converted to diesel power and remained a work boat until c.1945. Around then she came back over to the east coast and was rallied and rolled into 1964 when she dropped out of site. There was a reported sighting of her back in 2015 under a cover in Kerikeri. Read / see more here https://waitematawoodys.com/2015/03/04/the-minerva/ Does anyone know her current status / condition?
Photo below dated July 2019 ex google + link to TVNZ story on the restoration project. Both ex K Ricketts
Sad Woody Day Across The Ditch Received a note from one of our Australian WW followers – Andrew Christie given me the heads up on the recent demise of – Nering, the 42’8” Percy Tripcony (Breakfast Creek Brisbane Australia) carvel hull cruiser built in 1950 – that went ashore on Double Island Point south of Fraser Island.
She was a very similar boat to the South Passage also from the same builder. https://www.youtube.com/watch?v=N2aFp8lLK24 She was of note in that she had a passage connecting the forecastle cabin to the trunk cabin under the bridge deck on the starboard side a layout used in a few Moreton Bay bridge deck cruisers of her period.
Nering had fallen on hard times recently and had sold twice in the past few years at rock bottom unloved wooden boat prices. Reports are she was on her way from Coffs Harbour in New South Wales to Maryborough for a restoration. Double Island Point is a stopping point for boats heading north across the Wide Bay bar.
Social media chat reports that Nering was beached as she was taking on water and sinking. Her crew managed to safely get ashore and call the alarm. Always sad to see a woody come to an endlike this, but you have to question the decision to take her to sea, given her condition and again on-line chat says her bilge pump/s were worked overtime before she left the dock.
Following on from Sundays story on Matahorua the sailing cutter tied up at the Riwaka river / estuary , today we follow the camera of Tim and Pauline Evill as they explore the craft that call Riwaka their home ‘port’.
A fine collection of woodys, all appearing to be well loved – if you had the Riwaka agency for marine varnish , you wouldn’t remain in business for long 🙂
I was sent the above photo of Tiakina by Lindsay McMorran, they took the photo of her berth in the Viaduct, Auckland.Lindsay commented that she is an ex Wellington pilot boat, built c.1952 and her normal home port is Dunedin. Tiakina is visiting Auckland for the A-Cup regatta.
Anyone able to enlighten us on her background / past?
Input from John Bullivant – another photo below of Tiakina. John also commented that she may have been built in the UK.
Input and photos below from Cameron Pollard – She was built in the UK. After being disposed of by Wellington Harbour Board she did a stint as a tuna longliner.Refit to pleasure use was done at Jorgensen boat yard.
A couple of photos below – I took today at the Viaduct
Input from Paul Drake – TIAKINA (to take care of) designed by Alex Collings and built by M,W. Blackmore and Son in Bideford England, planked with 52mm makore and powered with two ERL 5/75 Crossleys, each 250hp. She departed Exmouth on October 1 1953 with a crew of eight and arrived Wellington February 12 1954. She required slipping at Colombo after weather damage crossing the Arabian Sea. Voyage distance was about 14,100 nm (26,000km). At 83 feet LOA and 80 tonnes, she was the largest pilot boat on the NZ coast. After just two years service she required major remedial work due to ‘green’ timber being used in her construction. This work took nearly two years and was done by Wellington Harbour Board’s shipwright staff. In 1982 she was extensively rebuilt and re configured by Jorgenson’s of Picton and continued in service. In 1992 she was retired and sold to Auckland owners for a bargain price. She was used for fishing etc before ending up in Dunedin where she fell on better times and is now clearly well loved and transformed into a luxury charter boat. As a retired Wellington pilot, it is heartwarming to see a boat I knew so well still giving good service after nearly 70 years.
18-03-2021 Input from Captain Charles Smith – Like Paul Drake’s fine comments above, I am similarly heartened to see that Tiakina is being well looked after and regularly used. I can add a little to the history. I commenced a 48 year piloting career on Wellington Harbour as skipper of Tiakina in 1972 before being promoted and I experienced many severe conditions and hard knocks whilst on board. Having experienced many other pilot vessels she was firmly my favourite. Tiakina suited the robust sea conditions at Wellington entrance. She was built to last although the constant knocks alongside ships at sea eventually took their toll with framing, particularly on the shoulders. Assembling construction timbers took time. Timbers used included 52mm thick makore hull sheathing, heart pohutukawa branch was used on the stem and stern crooks and the keel was one length of heart tallowwood or ironbark. Being severely tested in daily service it took a team of shipwrights to keep her in service. Heart kauri was used in many places. The nineteen week voyage from the UK via Suez, and north Australia (30 September 1953 to 12 February 1954) was made without the benefit of radar, AIS, PPUs, gyro compass or ECDIS – just skill and a magnetic compass by the eight crew. The contract made by the Wellington Harbour Board was for a price of £35,000 with £5,000 allowed for the delivery voyage. The Harbour Board sought quotations from builders in NZ and Australia before settling on M W Blackmore in Bideford UK. Radar was fitted on arrival in Wellington at a cost of £1,590. Tiakina was constructed to operate in open water conditions off the port entrance after pilotage was deemed to be compulsory from 1 October 1952 (after a collision between two large ships in the entrance channel in May 1950). With port managers at the time having lived through WW2, Tiakina was also designed to be a cruising examination vessel in times of hostility, hence her generous accommodation.
YESTERDAYS MYSTERY LAUNCH QUIZ WINNER – Albert Birnie, Onehunga. The correct answer was – Cyrena, built in 1923 by Dick Lang for Peter Smith
Royal Saxon 1989 > 1994 The top photo made a brief appearance on Lew Redwood’s fb and Nathan Herbert correctly ID’ed the launch as the 33’ Colin Wild, 1930 built – Royal Saxon, anchored in Islington Bay, Rangitoto Island. At the time I would suspect she was owned by Rick McCay (MV Luana), so sometime between late 1980 and 1994, when he sold her. These days Royal Saxon resides at the top of the South Island, at Motueka. The WW link below and comments section will tell you all about the boat and how she ended up down south.
The 2nd photo I took 2 years ago of her anchored at Kaiteriteri, when we were on-route to the Abel Tasman National Park. Fantastic to see her unchanged after 30 odd years, another example of how beautiful Colin Wild’s designs were and how most remain so today 🙂
15-03-2021 Input From Mark Newcomb – I am pretty sure I recall being a young boy on a trip from Tauranga to Mayor Island on the launch Royal Saxon. It must have been the mid 1950’s, and I had thought the launch belonged to Arthur Honeyfield, a well known farmer and businessman who had a lovely farm at Kauri Point(?) near Katikati. Honeyfield was a member of the Tauranga Harbor Board and had somehow managed to get a substantial wharf built near the farm for easy access to the inner Tauranga Harbor. We embarked on our journey from this wharf. I recall a lodge on the island at SE Bay, not sure if we stayed there or on board. I still have some obsidian that I found on the island. It is entirely possible that Royal Saxon was owned by a friend of Arthur’s, or was on charter. Sadly, the son John Honeyfield, died last week, so that avenue of follow up has gone.
CYA BUMPER BOATS – I hear that during race one of the Classic Regatta the other week, the A Division boys were playing silly buggers again. At the start 3 of of the ‘stars’ of the A Class fleet all got hooked up on the start line and ended up all doing an unplanned buffalo girl 🙂
The 40’ Aoroa was built in 1928 by Miller & Tunnage and is kauri carvel planked. She has a beam of 9’11” and draws 3’5”. These days she is powered by a 100 hp Ford diesel, which I would suspect works hard to push a boat of Aoroa size along. But I’m sure I’ll be told its all about gearbox / prop configuration.
Thankfully her tme listing included some old b/w photos (below) from when launched and of the alterations over the years – from these we can see the bones of a very smart woody, that hopefully one day someone will do a top-chop on 🙂
Can we expand more on her past?
Harold Kidd Input – Original owner was J.T. Paul; original engine a 100hp S4 6 cylinder Gray.. Did a trip to Akaroa in 1931. Owned by W.R. Carey of Lyttelton in 1953. VERY handsome vessel.
20-03-2021 Input from David Lackey – Wren Carey, the proprietor of the Kaiapoi Woollen Mills (then a substantial South Island manufacturer) was a friend and business associate of my father, Keith Lackey and, in the 1950s we would we occasionally call in to see him at his property in (I seem to remember) Blackwood Bay, Queen Charlotte Sound. The property was both immense and immaculate, boasting magnificent gardens and even a citrus orchard (which, for those familiar with QC sound, was a rarity if not a miracle. At one end of the beach was a large boatshed in which Mr Carey kept the immaculate Aoroa. Assisted by his caretaker, Mr Carey would launch the ship and take off for a day cruise in the sound, putting her away again in the evening just as nonchalantly as if she were a runabout or dinghy. She was like a piece of chippendale furniture, with glowing topsides and gleaming brightwork. I believe she still had the 6 cylinder Gray Engine which was a point of mutual interest because our Marinus was powered by twin 144hp Graymarine Luggers. Wren Carey was the father of CR (Roger) Carey, the noted Picton builder of many fine commercial and private vessels.
Bay of Islands woody – Marcus Petraska snapped the top photo of the Jorgensen built ex workboat – Liberator tied up last week at the Russel wharf, one of the smartest ex workboat conversions afloat. Possibly still owned by Grant and Semmens.
The second photo was taken by Dean Wright, also in the BOI’s over the 2019/20 summer cruising period.
Can anyone tell us more about Liberator?
A CALL FOR HELP – Where Can You Buy Pitch
I have been contacted by boat builder, Ron Hackett in regard to sourcing pitch, Ron used to get it from the Shell Co in Whangerei. He has tried Z, Marsden Refinery, and a company that re-uses old tarseal, but no joy. Does anyone know if you can still buy it and if so where. Also can tar be substituted for pitch? Ron wants to put some in the bottom of an older wooden boat.
Requests for info on boat on WW can be a lot like paying the pokie machines – you ‘feed’ the machine and pull the handle – sometimes it spins and nothing comes up, most of the time we get a small payout, just enough to keep us motivated to keep playing – then sometimes you hit the jackpot.
Today’s story is a jackpot pay out – starts like this – over the last 5>6 years the 1939, 56′, Miller & Tunnage built – Koputai has popped up on WW and we have been trying uncover more of her history. Back in May 2015 she was for sale and the then owner, the late, Louey Sandiant told us everything you would want to know about the photo + photos. Then in Sept 2020 Keith Foster, who purchased Koputai off Louey contacted WW and supplied some updated photos and a request for any further intel on the boat.
It took a few months but Matt Siddells made contact and advised that his grandfather – Russell Bramwell purchased Koputai as a retired pilot boat and did the conversion to pleasure boat. Matt has very kindly shared the gallery above of photos from the family album. You can see and read more about Koputai at the WW links below
Sadly I know the fate of the above 42’ launch – Hatea was destroyed by fire while cruising at the Hen & Chicken Islands, Northland, in February 1931. The only other information I can tell you is she was Whangarei based at the time.
Anyone one tell us more about Hatea – designer>builder> year launched etc.
Yacht On The Rocks Quiz Winner = Peter Brookes with the correct answer – Little Jim. Having crawled all over LJ doing to rebuilds/refurbishments – you would expect Peter to get it right 🙂
Ok I’m getting older and boring but when out and about (driving) I normally listen to Radio NZ – Nine to Noon show, but with CV-19 lock-down I missed Wednesdays show. And woodys I missed a goodie, but Charles Rogers via Angus (Centaurus) Rogers pointed me to the RNZ website for the story.
That story involves the 27’ 1915 Milner & Milner ex workboat – Elsie and how Brian Railton the commodore of the Dunedin classic boat club, came to own her. There is a link below to the full on-line interview between Brian and Kathryn Ryan (RNZ), but a quick overview looks like this.
Elsie started life as a hand lining fishing boat on the Otago Harbour, she remained as a commercial fishing boat until the early 2000’s when she was retired. Like a lot of oldies Elsie didn’t like retirement and escaped i.e. broke her mooring and took herself on a tour of the Dunedin waterfront, eventually ending up on a rock seawall. Repaired but then she suffered damage on a sandbar. Luckily for Elsie the boat was spotted by Brian who acquired her and transported the boat from Carey’s Bay near Port Chalmers to his home in Wyndham in eastern Southland where Brian and a retired boat builder friend, are undertaking a rolling restoration. Most importantly – they intend to use her for what she was designed for i.e. fishing. In the photo above, taken by Brian, the pumps are working overtime to keep her a float. Click below to hear the full interview
Harold Kidd Input – ELSIE was built by the MILLER brothers.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 