CLASSIC LIDGARD KETCH – TE TAINUI – Flash Back Friday

CLASSIC LIDGARD KETCH – TE TAINUI – Flash Back Friday

Chatting with the team at CMC Design earlier in the week the subject of hero projects came up, and quickly turned to the 2017/18 restoration of the TE TAINUI.

The team a CMC Design completed all the white oak cabinetry including full galley refit, trims and latches, saloon table, console instrument panels and other interior elements.

Sian from CMC pointed me to the ketches fb page. Below I have uplifted some of the history behind TE TAINUI.

It is believed in ‘recent‘ times TE TAINUI went over to over to Australia, can anyone update us on whereabouts.

A Brief History –

The wooden 51 foot Lidgard designed ketch for Frank Harding (Chief Engineer Auckland Gas Co) was to be called Te Tainui, for the express purpose of a round the world cruise that Frank and his wife and another couple planned to undertake. NB there is some question on which Lidguard designed the boat, after CMC Design requested information direct from John and also Garry (Jim’s son, John’s cousin) Lidgard, both have confirmed unlikely that either (John, Jim or Roy) were involved. The mystery continues!

Commissioned in 1970, with building commencing in 1971 by boat builder George McLean in his backyard in Auckland over the span of a decade.

In the time it took to complete the vessel the Auckland suburbs had seen a boom and houses had been built so densely around him, the boat needed to be craned out to free it from its urban shackles, which was sure to have been an impressive sight.

The Te Tainui used some of the last four lots of heart kauri felled in the Coromandel. With two lots being used to build boats at Salthouse, the remaining two were used for Lidguard boats. The lengths of the timber were sought after to make grand boats such as these, where the length of the planks were a key part of the build.

Frank Harding specified a ‘range of dual systems’ throughout due to the nature of purpose.

Te Tainui duly set sail on the planned cruise but only days into it returned (suggested incompatibility amongst the crew) to anchor off Herald Island and remained there ‘untouched’ until Don Brooke and Max Hall bought it some time in 1976-77. Their first task was to dump trailer loads of tinned provisions (for the world cruise) left since Te Tainui returned to the mooring many months earlier.

1978 Don Brooke sold his half share of Te Tainui to Michael Meredith (Max and Michael were good friends and neighbours). An ongoing programme of upgrading and modernising commenced, including;

* installing wet exhaust-original dry exhaust up the mizzen mast

* fitted steel framed fwd windows main cabin

* fitted morse controls to enable gearbox and throttle operation from dual stations

* modified the sheer line to make it true

* redesigned/rebuilt the aft cabin (by Salthouse)

* re wired the electrics

* fitted autopilot and fish finder

* fitted self furling headsail equipment

* rebuilt layout/lockers aft deck and steering control pedestal

* built teak seating aft and installed new davits

* a redesign of main cabin and table to accommodate 10

Te Tainui was the official Squadron committee/mark boat for the International Citizen on class series-Stewart 34’s. It was held annually and attracted many notable international and leading NZ skippers. In one regatta Russell Coutts’s boat collided front on with the stem of Te Tainui (anchored) and sprung a number of planks! A major refastening job at Salthouse’s. Apart from regular cruising and diving trips throughout the Hauraki Gulf, Bay of Islands, Great Barrier and the Merc’s, Michael used it extensively for client (both local and international) day trips. Due to an impending move to Sydney Max Hall assumed full ownership of Te Tainui in 1994.

In late in 1999 to two American couples Todd and Louise Nelson and Mark and Sandra Eads purchased it from Max as a joint venture in Nelson, New Zealand for a substantial sum of $215,000NZD. After four or five years of sailing they reached as far as Singapore. One couple went back to the USA and the boat was again sold.

William Anderson picked up his new boat Te Tainui in Singapore and sailed it back virtually single-handedly to New Zealand via Australia with his wife. The trip was made more comfortable by the recent inclusion of air conditioning throughout the boat, a welcome addition to satisfy the American owners no doubt and appreciated in light of the large 360 degree windows in the main saloon.

William (Bill) a Naval Architect, lived on the boat for a time at Mission Bay, Auckland

In 2007 he sold the boat on to Rosie and Doug Horman, hailing from Cornwall and Melbourne respectively, who had sailed over from England for a new life in New Zealand. They needed a bigger boat and the Te Tainui was the grand dame they were looking for. Brought up to The Bay Of Islands, the boat was kept on a swing mooring now where the new marina docks stand at Opua. Their love for the boat was apparent with it being used every weekend for local trips to Whangamumu, down to Great Barrier Island and beyond. The quiet engine and panoramic views from the saloon were some of the great features of the boat. They entertained guests regularly and often slept up top enjoying the breeze and the views.

The plan was to take the boat back to England to repeat a circumnavigation of the country. Alas, it wasn’t to be, Dough was tragically taken ill and the boat passed into new hand once more.

Luke and Lisa Aaron of Melbourne Australia, purchased the boat in 2017. Again the boat had cast a spell on its owners and a loving restoration projects began in Opua, Bay of Islands in mid 2017. They had great vision to create a clean modern look while keeping true to the beautiful features of the boat. Local craftspeople and boat builders spent 18 months bringing every aspect of the boat up to the highest standard, with modern additions including state of the art electric blinds. A fresh feel throughout was accented by beautiful bespoke white oak joinery and soft neutral furnishings. The couple intended to keep the boat in the Bay Of Islands to enjoy with their family with trips over from Melbourne while on breaks from their construction business.

Historical info complied from files from the Te Tainui, and info supplied by previous owners Michael Meredith and Rosie Horman.

WHAT DO ALL THESE CLASSIC WOODEN CRAFT HAVE IN COMMON

MARLINE
KORAWAI
OTEHEI
ALMA G II
LADY CROSSLEY

WHAT DO ALL THESE CLASSIC WOODEN CRAFT HAVE IN COMMON

As I have noted recently on WW the classic wooden boating scene in the Bay of Islands is experiencing a re-birth. Seems one in three woodys the Wooden Boat Bureau has sold in the last 2 years has headed north. And recently the woody skippers have been organising events to show case the woody movement in the B.O.I. – we like that.

At the recent Russell Tall Ships Regatta on the Friday prior to the sailing regatta there was a Classic Launch Parade that had 13 woodys participating. Post the parade one of the skippers pointed out the % of woody craft that owed their good looks to time spent at the CMC Design – Boatbuilders Opua yard. So I did a count and in recent times and in no particular order the following woodys have been under the care of the talented crew at CMC Design – LADY CROSSLEY, KORAWAI, OTEHEI, MARLINE and ALMA G II.

Now they aren’t the only boatbuilders up north but they seem to get the cream of the work. When you factor in haul-out yard costs in the greater Auckland area, a wee road trip on one of the specialist boat haulage trucks isn’t the budget stumbling block it once was.

If todays WW story reads like an ad, I suppose it is, I’m passionate about seeing our classic fleet get the TLC they deserve.
Check out the CMC website – some great work-in-process photos on their work + its not all boats, some stunning architectural  and commercial wood work.  https://www.cmcdesign.co.nz/marine

28-02-2026 UPDATE – video below of the LADY CROSSLEY project

https://www.facebook.com/share/v/1DBPqwBVVR

CLASSIC WOODEN LAUNCH MARLINE RELAUNCHED

Screenshot

CLASSIC WOODEN LAUNCH MARLINE RELAUNCHED

Over winter the classic wooden launch – MARLINE has been hibernating in the CMC Design boat yard in Opua, Northland.

MARLINE’s custodian these days is Kennedy Warne , who worked on the refit alongside the CMC Design team . 

The launch has a very special history – prior to Kennedy, it was owned by his father Ken and originally built by Ken’s father Leon Warne in 1949/50.

Upgrades to MARLINE included –

• A new walk through transom

• Hand built wooden skylights with etched glass created in the original glass design.

• Reconfiguration of cabinetry and storage in the galley and head.

• Upgrading all water and diesel tanks.

• New elements, anchor winch, solar, electrical boards, refrigeration and oven.

• New Kauri cockpit flooring.

• New duckboard.

Check out the Oct 2025 WW story here for a look at the work-in-progress https://waitematawoodys.com/2025/10/27/classic-wooden-bay-of-islands-launch-marline-gets-a-refresh/

Much of the timber used in the project was from Kennedy’s personal collection, including some kauri timber leftover from the original build. Lovely Rewarewa with beautiful grain, repurposing Kennedy’s aunts dresser top for the head vanity top. Kauri slab from Kennedy’s good friend for the kitchen bench and oven surround.

The yard incorporated and repurposed as much timber as possible, the new handrails, plate holders, new door to the head and new skylight and many small detail elements.

A special touch was a picture of Leon etched onto a Kauri board (see below) as a gift for Kennedy from the yard.

CLASSIC WOODEN BAY OF ISLANDS LAUNCH – MARLINE GETS A REFRESH

CLASSIC WOODEN BAY OF ISLANDS LAUNCH – MARLINE GETS A REFRESH

Today’s woody story features the beautifully built MARLINE — a 1949/50 ex-game boat crafted by Leon Warne, and remarkably, still in the same family after three generations.

Now owned by Leon’s son, Ken Warne, the custodianship torch has been passed to Ken’s son Kennedy Warne, who’s been spending countless hours alongside the skilled team at CMC Design Boatbuilders in Opua, giving MARLINE some well-earned TLC.

MARLINE arrived at the CMC Design workshop in late April 2025. As Sian Steward from CMC Design explains, Leon’s master craftsmanship remains front of mind in every decision as they carefully upgrade and refresh her. While she was in impressive condition on arrival, she’ll leave looking that little bit sharper — the perfect birthday present as she celebrates 75 years afloat.

Relaunch is set for December 2025 — just in time for a well-deserved Bay of Islands summer.

CLASSIC WOODEN LAUNCH – ALMA G II – THE FINAL CHAPTER

CLASSIC WOODEN LAUNCH – ALMA G II – THE FINAL CHAPTER

Back in Nov WW covered the relaunching of the classic wooden launch – ALMA G II, after a 19 month rebuild / restoration in the CMC Design shed in Opus, Bay of Island.

Link below to the launch day, unfortunately we couldn’t stay for the second half of the event which saw ALMA G II motoring over to her rightful home in front of the Swordfish Club in Russell, Bay of Islands. https://waitematawoodys.com/2024/11/30/classic-game-boat-alma-g-ii-re-launching-ceremony/

Now thanks to the team at CMC Design we get to see the 1927 Collings & Bell built ALMA G II post launching – In my eyes a wonderful rebuild that has sympathetically brought her up to modern standards, yet retaining most of her original charm, whilst being a very usable vessel that will provide future generations with another 100 years of woody boating.

Check out the 2nd to last photo above – the design / fitting of the new hand rail is a clever idea – there where you need some sureness when scurrying up the side decks. So more tastful than a stainless steel bow rail set up.

CLASSIC 1927 WOODEN GAME BOAT – ALMA G II RE-LAUNCHED – 45 Photos & Videos

CLASSIC 1927 WOODEN GAME BOAT – ALMA G II RE-LAUNCHED 

For the last 18+ months WW has been following closely the refit / restoration of the 1927, Collings & Bell built game boat – ALMA G II.

On Wednesday I pointed the car north and attended the re-launching celebration at Opua, in the Bay of Islands.

Today is about sharing the day with all the WW readers – In previous WW stories (links below) we have extensively covered her past and how she progressed to what we are viewing today.

Tomorrow on WW we will run the videos I recored of the speeches, Waiata and blessing.

Co owners (brother & sister) Shelly and Brett Arlidge, grand children of the original owner – E C Arlidge, are to be commended for ensuring ALMA G II will still be cruising the Bay of Island waters in 100 years time.

I really like the interior fit out, its a take on the old school look and she even sports a reconditioned Ford Lees 130hp diesel engine, no ‘black box’ electronics connected to this engine.

Boatbuilder Craig McInnes and the team at CMC Design have excelled themselves with this project.

The game chair and salon table are original 1927 items.

The gallery of photos comes to us from the cameras of yours truely  and professional B.O.I. photographer Dean Wright. As always click on photos to enlarge 😉

Restoration #1 https://waitematawoodys.com/2023/05/01/restoration-of-alma-g-ii-begins/

Restoration #2 https://waitematawoodys.com/2023/12/06/alma-g-ii-restoration-update-2/

Restoration #3 & #4 https://waitematawoodys.com/2024/08/14/classic-wooden-launch-alma-g-ii-restoration-updates-3-4/

THE PEOPLE – A fantastic number of people turned out to celebrate the re-launch, seems anyone and everyone with a link to the boat or game fishing in the Bay of Islands was there.

CLASSIC WOODEN LAUNCH – ALMA G II Restoration Updates #3 & #4

CLASSIC WOODEN LAUNCH – ALMA G II Restoration Updates #3 & #4

We have been following the refit / rebuild of the1927 Collings & Bell classic wooden launch – ALMA G II for a while now, the last WW story was back in December 2023 Dec 2023 and I have a confession to make – Update #3 slipped between the WW cracks so today you get a two-4- one 🙂

UPDATE #3 from Sian Steward at CMC Design below – 

“So much has been going on in the last few months, the team have been working very hard and things are looking great.

After the long long months of initial work of bringing all the bones of the Alma G II back together and many coats of white paint in the hull interior we moved onto the next phase.

The hull has been double skinned with kauri planks, filled, fared and prepped for fiberglass. It was a shame to say goodbye to seeing all the beautiful original timber underneath, but a boat that floats is the ultimate goal.

It’s good to have all hands available for this aspect of the build, working together makes the tough job of glassing much more streamlined and quicker. No one wants to draw out glassing for too long and we are grateful it isn’t a regular part of our day-to-day job..

More full suited days in the hot hot heat bogging and readying for paint. This is where the restoration really looks like it is getting somewhere. We have been going since last April and these milestones are meaningful to both the workers and the boat owners.

The Alma G II has been carefully rolled once more and the whole process starts again on the port side.

From there, back to upright and some more detailed discussions on the interior finishes and fixtures. The owners are keen to honor the traditional elements of the boat and have been sourcing some really lovely items from navigation lights to the bench top surfaces.

Top coat paint colour choices are being made and we keep moving on…”

UPDATE #4

“Further updates on the Alma G II. We have layers of paint going on!   More hard work has been done in these last few months with the Lees engine going in, fiberglassing, long board sanding and bogging and fairing.  Real backbreaking stuff. Onward we go with paintwork and then the interior fit out. “   

LINKs TO PREVIOUS STORIES FOLLOWING THE PROJECT

WW May 2023 Story https://waitematawoodys.com/2023/05/01/restoration-of-alma-g-ii-begins/

WW Dec 2023 Story  https://waitematawoodys.com/2023/12/06/alma-g-ii-restoration-update-2/