Looking for Jaguar

LOOKING FOR JAGUAR
photos* & details ex Ken Ricketts, edited by Alan H.
(*photos of Jaguar are ex 8mm movie film so very poor quality)

Some History
Jaguar is a very rare craft having started life as a flying boat tender. She is one of 87 built of this base specification by the British Powerboat Co., in Hythe, Southhampton, U.k. in the 1930 >1940’s period. These craft were used around the world both in military & civilian service.
They were designed by Hubert Scott-Paine who owned the British Powerboat Co. The actual architect involved in the project was a George Selman. They were powered by various types & brands of paired engines overseas, but all the U.K. craft had S6 Perkin engines (refer spec sheet above)
In New Zealand the craft were used by the air force for their flying boat fleet during & after WWII & Tasman Empire Airways Ltd (T.E.A.L.). TEAL used them out of Mechanics Bay, for flying boat patrol.  All these boats were made of mahogany, with double diagonal planking on the bottom & single diagonal planking on the sides. There were at least 3 boats in the TEAL fleet, one of which had, 2 x Ford V8 engines, one had 2 x Meadows 6 cyl., petrol engines & another with 2 x 4-53 GM Detroits (this one was to become Jaguar, in civilian life).
During the 1950’s the TEAL fleet was under the control of a Mr Arch Tucket, (owner of the 30 foot launch Otazel, photo below). Ken Ricketts family knew Arch Tucket & Ken went out on patrol on the boats a few times.
The boats were sold when TEAL moved operations to Mangere & focused on land based planes.

 Pleasure Use
One of the craft was given the name Jaguar & bought by a Mr Hansen, of The Parade, Bucklands Beach.
Hansen hardly used her personally, but she was in the care of & used extensively, by the a very fine gentleman, the late Jim Ellis, & his family, also of Bucklands Beach, a highly skilled specialist watchmaker, from the mid 1960s well in to the 1970s. She was moored at Bucklands Beach for many years on a swing mooring during this period. The Ricketts were friends with Jim Ellis & they cruised together often, in their launch Flying Scud.

So the question of the day is where is Jaguar today & what became of her two sister ships?

Harold Kidd Update

There appears to be a degree of over-simplification in Ken’s article between the TEAL launches and the RNZAF launches built to the Scott-Paine/ British Power Boats’ 40ft Seaplane Tender design. TEAL’s sole example was built in the UK by British Power Boats. She had twin Meadows engines.
The 3 RNZAF versions were built by W.G. Lowe & Son Ltd in Auckland and were launched in October 1942. They were W44, W45 and W46, powered with twin 6 cylinder 110hp Graymarine diesels, both RH rotation.
W44 went to CAB at Mechanics Bay but went back to RNZAF service in 1955.
A fourth RNZAF version, W88, was built by W.G. Lowe & Son Ltd in July 1943 and is now restored and on display at the RNZAF Museum, Wigram.
The TEAL UK-built boat was taken over by the RNZAF as W6.
A fifth Scott-Paine 40 footer was acquired by the RNZAF about 1952 and given the number W322. In his well-researched article on the subject in the AHSNZ Journal of August 1995,D.J. Duxbury states, “It is thought that this boat originated with the RAF in Singapore, and it appears to be identical to the New Zealand-built control launches.”
If JAGUAR is built of mahogany then she would seem to be either W6 or W322.

A news clipping below ex Harold Kidd from Papers Past – New Zealand Herald – 4 September 1942. click to enlarge

PP

01-07-2018 Update from John Bullivant – photo below shows Jaguar hauled out c.1975, at Bucklands Beach Yacht Club, her mooring in those days was 80m (on the left) from the haul out ramp.

JAGUAR 70S

Wanda

WANDA

details & photo ex Ken Ricketts. edited by Alan H

Wanda, known to her original owners, the Porter family as ‘Little Wanda’. She was the Porter families introduction to the world of pleasure boating. Fred Porter got ‘the bug’ while out on Claude Atherton’s Manawai during WW II c1942-43. Claude Atherton was an employee of Mason & Porter at that time.

Her actual build date is unclear, but Fred’s son, David Porter, told Ken Ricketts he had been told he was taken away on her in 1943, when he was 3 weeks old, so she was built pre 1943. Terry Porter, David’s younger brother, feels she was probably built by Garth Lane or his father.

Wanda is approximately 26′ long & was powered by a Ford V8 petrol engine (most likely marinised by M & P) & was very quick for her era.

The above photo was taken at David’s grandfather (founder of the M & P) Reuben Porter, family home, on the water’s edge at Beachlands.

She was later replaced by Wanda II, built new c.1948 by the Lane Motor Boat & Mason & Porter. Then in 1961 with another Lane Motor Boat / M & P built launch, the 58′ Marnine & then again later with the luxury 68′ aluminum motor yacht Simran built by McMullen & Wing, which is now based overseas.

Keen to find out what happened to Wanda post the Porter period of ownership.

Erinor (Lady Allyson)

ERINOR (formerly Lady Allyson)
Snapped this rather fine sedan top launch moored off the the wharf at Sand Spit this morning.
Anyone able to help with more details on Erinor?

Lots of activity happening up there with the new marina construction well underway.

Saw more dolphins today than I have in the last 2 years.

04-07-2017 Update from Dean Wright

Dean snapped the photo below of Erinor on a swing mooring in Opito Bay, B.O.I.. She had just appeared there & Dean was wondering if she had migrated north?

Erinor-_DW85822

 

 

Where Is She Now? – Lady Ava

Where Is She Now ? – Lady Ava

A very pretty launch that we need in the CYA fleet, so the question today is where is she hiding these days – the above photo ex Jason Prew was taken at the Mahurangi Regatta in 2006.

I hope I have the correct name – the only reference I have is the yellow pennant on her stern – Lady Ava

+ need details on her please 🙂 thx Harold – amended as below.

Update from Harold Kidd

Its MISS AVA, built by Ernie Lane at Picton in 1931.
I looked at her to buy several years ago and found her quite attractive. She went to Wellington about 1937, owned by Ernie Lamberg. She was in NAPS at Wellington 1942-3 as Z70. Her dimensions are 36’x9’8″ and she recently was powered by a 6 cylinder Ford diesel. There is a nice pic of her in the Boat Harbour at Wellington in NAPS in “New Zealand Naval Vessels” by Bob McDougall on page 105. She hasn’t changed much since then.

Update to the above from Harold

johntwodogs is quite right. Z70 in that image is not MISS AVA. I wish I had checked my copy of NZNV before posting, especially since the entry in my database had an asterisk for a doubtful piece of info. I have only just found it after 3 hours of searching in my library, face down in the wrong place.
NZNV gives only a couple of NAPS numbers for Wellington launches, Z73 for QUEEN CHARLOTTE and Z78 for ROSEMARY M. I’ve filled in a few, eg RAHEMO with Z76. So what is this Z70? She’s a weird-looking craft, quite large. The only Wellington NAPS boat that seems to correspond is KOTUKU, a 48 footer owned by Wm. H Smith about which I know nothing.
The image below is for the Wellington buffs to chew over. Courtesies to Bob McDougall who had no responsibility for my leap in the dark.

PS Of course QUEEN CHARLOTTE is Z72, NOT Z73 as in NZNV.

Boat Harbour1942502

Updated ‘recent’ photos of Lady Ava ex John Wright. click photos to enlarge

John tells me the ‘young lad’ in the wheel house is ‘Captain Buck Rogers’

I’m Homeless


waitematawoodys needs a new global headquarters

After 6 years on A Pier @ Bayswater I have to find a new home for Raindance. The owner sold the berth on trademe, would have been nice to know it was on the market……. but as the say – you snooze, you lose.

In the ideal world looking for someone wanting to rent a 10.5 > 12m in Bayswater but Westhaven could be an option.

Contact Alan at waitematawoodys@gmail.com

Miss Brett

MISS BRETT

Classic displacement launch Miss Brett, built for the famous cream trip at the Bay of Islands. 40′ loa, 10’9″ beam, 2’11” draft. Kauri carvel planked, launched 1924, powered by 100 hp 6 cyld Ford diesel.

Must be loads of history out there on this old girl. Designer / builder??

Sorry about the photos, ex trademe & very poor quality 😦

Awatere

P1110779

AWATERE

Photos before & after refit ex Alan H, details & older sedan top photo ex current owner.

Awatere 32′ & surprisingly given her classic looks was built in 1980 by Claude Greenwood a boat builder at Whangateau (Leigh) for Mr Arcus who was at that time the ARA (Auckland Regional Authority) Chief Ranger for the Gulf Harbour region. He wanted a reasonably beamy comfortable launch for family cruising. He wanted practical and pretty and Awatere is both.
Her hull was made from a single kauri tree which was, according to anecdotal evidence, one of the last milled by the Whangarei Timber Company and people have mentioned that her lines are similar to some launches built by a Whangarei boat building company. After Arcus, she was for a while in Whangamata (hence the game poles) and shifted to Auckland around 1998.
The cabin sides are teak and she was originally built as a sedan top (refer photo above). The fly bridge was put on, probably in the early 90’s  by Geoff Bagnell, boat-builder of Milford.
She was re-engined by current owner in the late 1990’s and is currently powered by a 135 HP Ford Dover diesel (Moon Engines). Double berth up forward with two single amidships in the main cabin.
In 2013 Awatere underwent an extensive re-fit & included a back to bare wood paint / Uroxsys treatment, she was also re-propped & now cruises at around 10 Knots.

Note: there is comment on ww that Peter Arcus actually built Awatere himself , any info / photos on her past would be great & maybe we can clarify the builder / location issue. Correction – from Nathan Herbert – My wires are crossed. It was his yacht Egret which he built at farm. The wharf photo is at the farm though. Ive seen a photo of the launch new on farm which is what mucked me up

Builders Plate (ex the owner Geoff Steven)

IMG_2594

05-01-2015 Pam at the Whangateau Traditional Boat Yard sent me the 1/2 model photo below – could this be of Awatere ??

15-11-2017 UPDATE

Updated details on Awatere below. Written by Peter Arcus via Judy Turnbull.

“AWATERE was completely designed by myself.

I wanted a boat that would tow a barge (for transporting cattle) between Tiri Island and Whangaparaoa and that was also a good cruising launch and I wanted the construction to be strip plank concave/convex.

I consulted an expert, Howard Greenwood, (a boatbuilder whose yard was on the Whangateau estuary) and the hull was subsequently built by Greenwoods.  There was a curve built into the bilge shape that was an experiment put forward by Howard Greenwood.   By looking at the hull you can actually see the curvature that acted in the manner of a trim tab but was actually built into the hull.  The water flow under the boat gave it the desired effect.

Kauri was hard to get.  Bob Herman (Whangarei Timber Company) was a comrade from my Airforce days and we went down to the Mill in Whangarei to ask if he had any spare Kauri and I was lucky to get some beautiful timber.

When the hull was built Howard Greenwood commented that she may need a bit of ballast forward and I queried what to use. Howard said you’ve got it right there on Tiri, small flat rocks sealed between two floors – It will stay clean, you will never have to wash it.  It was placed up in the shoulders of the hull, the powerful part of the boat and she was beautifully balanced.  After completion the hull was towed by the “Pacific” to Hobbs’ Flat (now the site of Gulf Harbour Marina) and then towed overland by tractor up to the farm homestead where she was finished off by myself under a covered area.

She was powered by a 100hp Fordson installed by Eric Glavish, an Engineer from Helensvile.  The engine was completely dismantled and rebalanced and she ran like clockwork with a cruising speed of 10 knots and did 14 knots opened up.

She was launched in 1980.  An entry on the website states that at the time the boat was built I was the ARA Chief Ranger for the Gulf Harbour region.  That statement is incorrect.  I was the Farm Manager of the Hobbs Estate at Whangaparaoa prior to its sale in 1972.

The 1st photo in the article was taken just prior to Awatere being sold to Ian Boocock.”

Sybil Francis

SYBIL FRANCIS

This one might be easy but I suspect not – her trademe listing said she was built in 1935 & is 36′ three skin kauri planked with a 10′ beam. Powered by a 120 hp Ford diesel.
Currently based at Great Barrier Island & been earning her keep as a fishing boat, she has had one owner for the last twenty three years.

Anyone able to shed some light on the old girl?

Kumi

KUMI

KUMI

I received an email a few weeks ago from someone that talked about the launch Kumi – problem was it was not from the owner & I had no idea who they were. They did talk as if they had an interest (past / present) in the boat. I even rang Harold Kidd & asked him if he knew of xxxx xxxxxx, the name drew a blank with Harold also.

So I call Kumi’s owner Haydon Afford & ask him if he knows someone called xxxx xxxxxx – the answer “thats me, I get sick of having to spell my name so for years I have used xxxx xxxxxx for the unimportant things in life e.g. ordering a pizza etc. xxxx even has his own email address…….. which is more than Haydon does, no mobile phone either 🙂

Hayden then realizes that on the email to me he did not say it was from him. I have re-printed the email below.

” Dear Alan. Quiet at work so found all these fantastic pictures on your extremely good website . if you wanted to include Kumi in the  Bailey and Lowe  chapter I wouldn’t mind. brief history?  Launched aug 1905 as ‘Eliza’  for Henry Adams as a lorry to take produce to and from his island Moturoa in the bay of islands. Raced in 1908 rudder cup ;failed to win . The annoyed  mr Adams challenged any body [mainly aimed at line honours winner James Reid with Seabird] to a race for 50 guineas to Russel wharf and back . Kumi beat Seabird more by good luck than boat speed , since in the rerun of the rudder cup it was very obvious that Seabird is a faster hull! Adams  had some bank trouble in 1913 and Eliza vanished  never to be seen again , but fortuitously at exactly that moment ‘Kumi’ appeared built by the same builder to the same design and launched on the same date as ‘Eliza’ .whew. She was sold to other people and in 1928 sold to Whangarei harbour board as a pilot boat and used as such till 1955 .She then went to Whangaroa harbour as a crayfish boat for mr Russ and did this till 1975. It was during this time  that an oyster barge made a mistake in berthing, crushing Kumi against the wharf and sinking her in apparently three minutes. In 1975 she went to a  Whangarei back yard till 1985 where she was modernised. Mr pont of Whangarei sold her to mr  Tercel and she came back to Auckland where her modernisation rapidly deteriorated through several owners until 1999 when  the present owners purchased her in spite of the surveyors comment of “not even any use as firewood, too rotten and wet”. The Affords took her back to their place and rebuilt her to close to 1905ish ; which was lucky because she ended up the same as her launching day photo in the maritime museum which Harold Kidd told us about after  her relaunch. Kumi has had several engines but mr Pont in Whangarei installed a 1963   six cylinder Ford  rated at 80 horse power  and this engine still gives perfect service .Kumi is a fun boat, fast enough [if not a line honours winner] but sea kindly and comfortable and ready for the next 100 years.”

A little more about Kumi – in the summer of 2012/13 Kumi completed a circumnavigation of New Zealand, I have covered this previously on ww but if you missed it, click the link below to read Haydon’s tale. Post the trip Haydon gave a talk to CYA members at the RNZYS, it was one of most entertaining evening I have been to. Haydon & Kumi’s vovage was acknowledged in 2013 with the presentation to Haydon of the ‘CYA Outstanding Achievement Award In Seamanship’ (photo above)

The story of Haydon Afford’s 3 month circumnavigation aboard Kumi his 1905 Bailey & Lowe launch

Recognition – Kumi also features in the CYA Classic Register 2014-15 edition – the link below takes you to the section.

http://classicyacht.org.nz/demosite/wp-content/uploads/Classicreg2014/flipbook.html#p=26

Rahemo #2 Post

RAHEMO #2 Post

ww was contacted by the present owner of Rahemo & the information & photos the Rod Turner has supplied deserves its own post, read below
“The Chrysler Crown 125s I replaced were “mirror” or a contra-rotating handed pair. They were rugged and reliable, dedicated marine engines. No change of rotation occurred in the gear boxes. They were supplied and installed by Todds as New Zealand agents, not the Navy. Rahemo never had diesel engines before 1987. The “one family from new” is my mistake as I was not aware of Mr Butchers 2 year ownership. I thought the Todd family owner her from new. The Trademe listing was done by Vinnings Brokers. Rahemo returned to Auckland in the 1950s to be used for deep sea fishing in the Bay of Islands before making a second trip back to Wellington.“

Richard has supplied 2 photos of Rahemo on the hard showing her under-water hull shape & a stunning black and white is of Rahemo and another family boat, the “Maroro” taken in Onahau Bay, Queen Charlotte Sound in about 1948. Maroro is a Chris Craft from about 1932 still in his families ownership awaiting restoration.