It is not often that I reproduce a followers contribution unedited but todays story is a gem – so over to you Greg Billington 😉 Link to the WW story Greg refers to below https://waitematawoodys.com/2024/03/22/sea-deil-sea-devil-skipjack/

Hi Alan  – nice to see Skipjack, nee Sea De’il featured in a recent post. Perhaps I can clarify re your question about whether James Hoey’s boat is in fact Skipjack? You are quite correct that the length has changed. Many things have changed with this boat since she was launched! The owner/guardian before me, which is pre-2016, was Brent Gribble of AkzoNobel Paints. Brent and his father had a major stern modification carried out by Glenn Burnnand of Burnnand Marine in Auckland. This increased her length to 10 metres, with a square, step-through transom and with a fish cleaning s/s basin built-in. Prior to Brent’s ownership, Sea Devil, as she was called then, was a restoration project for Captain Vern Tonks in Whangarei. I received the boat’s original history from Winston Hoey, via Brent. Winston recorded that Sea De’il was built and designed by Chas Bailey circa 1918, for James Hoey and his son Cecil (Born 1901). The boat was used  for transport from Whangarei to Reotahi Meat Works, near where the family bach was located. She was powered originally by a flat head Dodge or Desoto gear, and the first doghouse was added in 1928.

Subsequently, Dec 1951 – ship wrights Angus Henderson and Bill Naggs – built a new cabin to create more head room. They also created the step-up foredeck, and added the lead board on the bow. This was built of Kowhai timber and each rib in the boat was replicated – doubling the ribs in the hull to strengthen for the extension, and a bronze rudder was cast in Whangarei. At this time too, a 4-cylinder Ruston Engine was fitted.

 In 2005, after hearing she was destined for the tip, Captain Vern Tonks took her on as his “passionate hobby”. Captain Tonks was quoted saying, “She’s a piece of Whangarei’s history that requires restoring. It’s quite amazing really how many of them are lying around the country, sticking out from under covers, in various states of disrepair. We are a very strong nation of boating people and unfortunately a lot of these crafts have become non-existent and some of them are nice classic vessels”

Vern expected that he had a two-year project. He completely gutted her and started rebuilding the structure, keeping the original portholes, installing a new wheel house with the engine under the floor and a couple of bilge keels to dampen rolling. “Three or four trailer loads have gone to the dump out of her. She’s been derelict for so long and from what I’ve found there was a lot of things that weren’t up to spec in the construction. Someone somewhere along the way has put a lot of veneered Rimu custom wood into her, which is allergic to water and of course it all went rotten. So, I got to the stage where all the timber I’ve had sitting around is coming to good use”

Vern also changed the name back to the English meaning of Sea Devil. Sadly though, one month before finishing her, with plans to compete in the Classic Boat fishing completion in Whangaroa Harbour, Vern passed away in 2008.

This is when Brent and Sarina Gribble took over the project, and with the help of widow June Tonks and close friend of Vern’s and Brent’s – Steve Ekman, they completed the refit, and in June 2008, she was launched on the beach at Oakura at low tide – going back in the water for the first time in 23 years. After a time, Brent took her to the Outboard Boating Club, onto a swing mooring in the Okahu Lagoon, and as mentioned, I purchased her and kept her there before moving her in 2019 to her current berth in the Waikawa Marina in the Sounds.

Like all classic boats, and especially those of considerable age, Skipjack has had lots of work done to suit the inclinations of the various owners and simply to keep her seaworthy. Since I’ve been taking care of her, I’ve concentrated primarily on improving the mechanical side of things – which has included all keel-bolt replacement (which you reported at the time), new prop and shaft, new gearbox shaft and universal, new steering, all engine seals and engine mounts replaced (Ford Dover 80hp), new water-pump and tanks (replacing an old copper hot water cylinder!), new stove, Eberspacher diesel heater (which in the Sounds makes winter cruising a doddle…), replacement of all topside decks, new mast, large holding tank and shore pump-out fitting, new electric toilet, new oil cooler and all hosing upgraded, all s/s exhaust system and dry riser…you get the picture! Something always needs to be done. But these days, Skipjack is very seaworthy and much loved! The pic below shows her recently, in Greville Harbour on the western side of D’Urville Island – a trip of around 250kms. Skipjack cruises at 7.5 knots at the engine’s optimum rpm of 1,800.