Meola is one of those boats that no matter what angle you view her, she just looks right. Built in 1961 by Miller and Tunnage at Port Chalmers for the Ministry of Works. Her job was the servicing of Marine Dept. & Navy installations around Waitemata Harbour & the Hauraki Gulf. She is 42’6″ LOA with a 12’7″ beam. Her engine is a 4L3 Gardner that sees her comfortably cruise at 7.5>8 knots, using 1L of fuel per mile.
In 1976 she changed hands & was taken over by the NZ Navy.
When decommissioned by the Navy she was converted to a pleasure boat & is now a very salty launch capable of coastal cruising. Her current owner has recently rebuilt the wheelhouse, rewired her, installed new ‘plastic’ water tanks (700L). She carries 600L of fuel (s/s tanks).
Her galley & engine room have also been revamped. As you would expect she sports all the electronic & safety gear needed for coastal passages. Also installed are solar panels & 12v refrigeration to support the engine driven compressor frig / freezer.
Sleeping is a very comfortable 4 berths, being 2 forward bunks, a skippers Queen size bunk & a very cosy ‘winter’ bunk alongside the Gardner.
If you wonder why I’m being a little OTT with details, thats because her owner has decided that sail is really his thing & wants to see Meola move onto a good owner.
You would struggle to find a vessel better suited to either mooching around the gulf or coastal cruising to the Bay of Islands or Marlborough Sounds. Most of you have heard me rabbit on about the concept of the ‘floating bach’ – well Meola is a boat that fits that role perfectly & you could own her for less than a 1/4 the price of a bare coastal section. AND – she is a serious looker 🙂
If any woodys out there are looking for the perfect floating bach or know someone that is – contact Bram Cone at coneco@xtra.co.nz
Mason Bay (originally named San Guisepp) was built by Curnow & Wilson c.1956/57, while she has spent most of her life as a work boat she is now a very comfortable pleasure craft.
Details: LOA 14m, BOA 4m,.DR 1.5m 22Tonnes, 1500l diesel,800l water. Engine is a 6BD1 ISUZU 3 with a Capitol box, prop = 29in X 17in. The hull is 3 bl. 32mm Kauri copper fastened on 3 stringers/side. Below is a summary in chronological order of her life – her present owner Gary Underwood would like any input to confirm or add to these details.
To view more details on her & the restoration visit gazzabomasonbay.blogspot
HISTORY OF MASON BAY
1956/7 Built Curnow and Wilton, Nelson for Tony Bonica, Island Bay Wellington as a day fisher. Launched as “SAN GUISEPPE”. Powered by a Lister JP3 (tbc) 1974 Ian Boyce went to Napier as she was for sale as “MARY LW”. Owned by Willy Watson. Had a Fordson (6?) and the Capital 3:1 1974 Late 80’s in Port Chalmers. 1978 Big NE blow (see newspapers) and 8 boats caught off the Nuggets, Otago bar closed “SEAWITCH” (sistership to DORADE) lost with 2 crew, Warren Wilson skipper & Les Walker (leadboots) MASON BAY all ok. ( Not sure if those 2 guys were on Mason Bay or Seawitch) 1985 Big refit at Miller and Tunnage. new bulwarks, and the 6BD1 Isuzu was installed with the 3:1 Capitol box. Then sold to a Mr. Hall in Nelson/Motueka. He also had “PEARLY SHELL” I believe 1993 Bought by Ian Boyce (from whom a lot of this info comes). Based in Tauranga with the “SEA BEE” and fished tuna off the west coast of the South IS. 1995 Sold to “Blondie”who had her for 2 years and ended up in Bluff 2001 Seen and photographed fishing in Lyttleton Hbr. 2007 Bought by Russell Keen from a finance company. 2009 Sold to Gary Underwood 2010 Motored north to Whangarei in Jan. 2010 May – hauled at Norsand boatyard for refit/rebuild and conversion to pleasure. Shipwright was Marcus Raimon 2012 Re-launched and now home port is Whangarei Town Basin.
THE RESTORATION OF AKARANA Details & photos below ex Dick & Colleen Fisher. Edited by Alan Houghton. Above photo ex Dean Wright
Akarana was designed by A.J. Collings & built by W.G. Lowe in 1960 for the Port of Auckland. They sold her 34 years later in December 1994 to Peter McDonald of Whangarei, Peter (deceased) was a long time friend of Dick Fisher & Dick purchased Akarana off Peter in April 2000. Akarana is built using single skin 1 ¾ inch thick Kauri planking on spotted gum ribs with a hardwood keel & her displacement is 42 ton. W.G. Lowe had the contract to build her & allowed 23,000 man hours for her construction. When Port of Auckland sold her in 1994 she was on engine #6, having worn out 5 engines while working for the Auckland Harbour Board. From a couple of her log books that Dick has he would estimate that she has traveled somewhere between 600,000 + 700,000 miles during her working life as a pilot boat on Auckland harbour. The 8L3B Gardner engine which Dick re-built was originally installed in an oyster dredger based in Bluff. This engine was built by Gardners in 1960. The same year as Akarana. She cruises comfortably at 10 knots. After purchasing her, Dick took Akarana to his workshop at Kamo & then constructed a shed over her. You will see from the photos that shed is a little bit of an understatement 🙂
The photos below will give you an insight into the scale of the project & the stamina, patience & dedication of Dick Fisher in undertaking this restoration. Akarana is a magnificent vessel & a visit to her engine room normally sees most males gob-smacked at the attention to detail & cleanliness that would equal the finest medical operating theaters.
In additional to being a very skilled artisan, Dick is just a seriously good bloke, he once drove down to Auckland from Whangarei so I could show a visiting classic boater from the USA, who was a Gardner nut, over Akarana. You would struggle to find a more hospitable couple afloat than Colleen & Dick Fisher. One day I’ll post on ‘Hamel’ the Fisher families other wee ship 😉
I have captioned the images – scroll over to view, also remember you can enlarge a photo by clicking on it.
At the bottom of the post (part two), for your interest I have included some papers that Dick acquired from the old Auckland Harbour Board.
A. Harbour masters comments prior to letting tenders. B. Some of the requirements for the construction of Akarana. C. AHB reviewing costs. D. Breakdown of building costs. E. Copy of daily log, note the totals for the month of July 1982 were 278 pilots, 510 hours running, & 2791 miles.
Photos below during her build at W.G. Lowe in 1960
W.G. Lowe 1960
W.G. Lowe 1960
W.G. Lowe 1960
As sold by Auckland Harbour Board – 1994
At Westhaven,as sold, Dec 1994
The restoration
April 2000 as purchased by Dick F
Arrives at Kameo
New shed at Kameo
Blasting paint from hull
Blasting paint from interior
Paint off
Old engine removed
Rebuild of wheelhouse & cabin top
Rebuild of wheelhouse & cabin top
New bulwarks
New laminated beltings
Re caulking
Steering compartment
Steering compartment
Teak deck – 1&3/4″
Hatch
Funnel
Some bling
Almost finished
Business end
Rebuilding the engine
Rebuilding 8L3B Gardner
Rebuilding 8L3B Gardner
Rebuilding 8L3B Gardner
Installing engine
Gearbox
8L3B Gardner Installed
Relaunching
Leaving Kameo shed
Ready for launching
New home at Kissing Point Whangarei boatshed
Back in her happy place – April 2005
At home, 2005
Supporting paperwork
Helm Photos
10-04-2018 Update – Photo below of Akarana on launching day. Photo sent in by Paul Drake, taken by his brother Michael.
Update 09-01-2021 – Photos below of Akarana in Kent Passage, Bay of Islands – 6th Jan , sent in by Grant Anson
MANOWAI photos & details from Alan Craig ex Ken Ricketts, rewritten by Alan H
Well folks I now know the first boat I will be checking out at the 2016 Lake Rotoiti Classic Wooden Boat Parade 🙂
Manowai has spent the the last year tucked away in boat builder, Alan Craig’s boat shed, Alan has recently taken over the former shed of Tony Mitchell at Lake Rotoiti.
Ken has known the boat for over 70 years, first going aboard when he was around 8 years old.
Alan Craig advises that Manowai is 32′ with an 8′ beam & now owned by Lake Rotoiti local Dennis Walsh, Dennis intends to keep the launch on the lake where she will be a stunning additional to the classic fleet.. Dennis bought her off a Mr Andy Culpin of Hampton Downs. It is understood he had kept her in a shed for approx. 2 years & had started the restoration work & Alan has spent the last 12 months working on her. The target for relaunching is prior to Christmas 2015.
Alan commented that when purchased by Dennis Walsh she was powered by a BMC Commander, 4 cyl diesel, this is being replaced with a much lighter, brand new, 4 cyl. 40 hp Lombardini diesel, similar to what powers the launch Marjorie Rosa (ex Juliana) which also resides on Lake Rotoiti.
From the photos, the finish looks outstanding & given its been achieved just with elbow grease, lots of sandpaper & putty is a credit to Alan the boat builder.
Alan Craig has asked for help in sourcing early photos of her & any info from previous owners. The original builder & launch date are own known.
MANOWAI update ex Colin Brown via Ken Ricketts.edited by Alan H
Until today, I did not know that Colin B had significant roll in the refurbishment programme on MANOWAI.
He first became involved with her about 2003, when she was owned by Ralph Power & worked on her for an 8 year period in total, with around 3 years in his shed at Kumeu & also in the shed in McLeod Rd, Te Atatu South. During this period she changed hands from Ralph P., to Andy Culpin who sold her to Dennis Walsh.
The work included replacing the planking “hood ends” where the planking is fixed to the stem, with a new apron & new big pohutukawa stem knee. He also replaced most of the interior, except the middle section, where the engine was fitted over about a 3 year period
Colin told Ken he believes she was built by Bailey & Lowe in 1921
Now I’m not sure if Tauraka is her current name, but according to trademe she was built in 1912 by Fred Man for F.W. Chalmers. She started life as a gaff rigged sailboat with a 10 hp Frisco engine. About 1925 she went to Tauranga where she had 4 owners before moving to Lake Rotoiti about 2005. Currently powered by a Ford 4 cyl. 60hp diesel engine. The trademe listing says she sold for $4,020, at 32′ that is a huge amount of boat for the price. Someone got a real bargain.
Harold Kidd (brilliant) Input
It’s actually a bit more complicated than that. Fred Mann of John St., Ponsonby built a 24ft launch for Frank W. Chalmers in 1910 called GWEN. Chalmers worked for J.J. Craig. In December 1912 Mann launched another launch for Chalmers, the 32 footer, GWEN C. She had a 10hp 2 cylinder ‘Frisco Standard. Chalmers kept GWEN C until September 1921 when he sold her to Percy Carter of Tauranga. Carter changed her name to HELEN C. Now Carter was a leading light in the Tauranga Yacht & Motor Boat Club and a yachtsman through and through. Although the launch had used an auxiliary rig beforehand, Carter rigged her right up as a schooner and took part in yacht races in Tauranga with her. There had been a number of such launch/yacht hybrids before that in Auckland but they were neither fish nor fowl and generally defaulted to their launch role. HELEN C didn’t and carried her rig for many years. She was allocated the sail number E79 by the APYMBA and raced in the 1932 Auckland Anniversary Regatta on 20m handicap and came 6th on line. Carter sold her when he bought the Woollacott ketch MAY in 1953 and renamed MAY RAUMATI after a small yacht he had owned and raced in Tauranga pre-WW1. HELEN C’s new owner renamed her TAURAKA.
Lady Mary is currently listed on trademe & unless the owner updates the listing, will remain there a while i.e. almost zero details on the boat. So woodys who built her & when?
What we do know is she is 22’9″ long with a kauri carvel planked hull. Currently powered by a 30hp Volvo Penta diesel. At approx. 23′ you wouldn’t want too many people up top 🙂
The cradle she is hauled out on is familiar to me – its at Geoff Bagnall’s Milford yard, Raindance has spent time in that cradle 😉
While the exact details of who designed & built today’s launch Swanee are unclear, she is rather unique in that she has remained in that same family for over 50 years. Built from kauri she is 33′ long with 8’9″ beam & 2’8″ draft, currently powered by a 60hp Ford diesel.
You can see from the photos that she is very well appointed with everything one needs for comfortable cruising – electric flush toilet, freezer/frig, electric capstan & all the safety gear.
Over their period of ownership the Weber have ensured Swanee remained in great condition with a major 2 year out-of-water refit in 1970 that saw her re-ribbed with pohutukawa (you could back then 🙂 ) & new topsides. In 2004/5 her topsides were glassed & 2 pot painted & she was rewired.
Owner Ralph understands, from his mother, that she was built c.1920 in Auckland for Sanfords. Then later sold to the McLeod family of Helensville. Then she went to Dargaville and then owned by Matich Bros and later by Dr Maurice Matich. The Weber family, Ken & June, bought Swanee in 1961 and now ownership is with their son Ralph Weber of Matakohe. Currently moored at Pahi.
Ralph commented that Harold Kidd had previously mentioned that she may possibly have been the – ‘Sister Lola’ & built by Bailey & Lowe, if so she ‘raced’ with the Ponsonby Cruising Club.
Ralph sent ww photos of Swanee over a year ago & contacted me recently to say that unfortunately life has moved on & the family have had to make the difficult decision to sell Swanee after 50+ years of ownership, so today’s post has a degree of sadness but could offer a lot of happiness to someone looking to buy a classic launch. For a 33′ launch, Swanee is a lot of boat, you can see in the photos that there is no shortage of living area & she comfortably sleeps 5. After 50 years you end up nothing what works best & where on a boat 😉
Boat aesthetics is a very personal thing & with some people practicality is #1, but if I was buying her I would be off to see a good sympathetic wooden boat builder like Geoff Bagnall & returning her cabin windows to a style a little more in keeping with a 1920’s classic. People forget that these old girls are wood & the cost of a wee bit of restoration like this would not be great. After all there is little else that needs doing to her.
She sports rather a racy (flat aft) bottom so with a bigger motor I would imagine she would perform very well.
So woodys – can we find a buyer for Swanee or know something that is looking for a classic wooden launch? Being based currently at Pahi she does present some interesting scenarios e.g. you could keep her there for a few seasons & have a floating family bach. A group of guys could get together & buy a good fishing / man bach on the Kaipara. Or simple put her on a truck & return her to the Waitemata.
Now I do not normally like to talk money in ww posts but the overall 2nd hand boating market is just so soft that when I think something is great value, I will – well woodys someone could own Swanee for less than $30K. , that is real value, you could not build a garage for that.
If you or anyone you know could be interested – contact Ralph, initially via email on weber.bros@xtra.co.nz
Also interested in any info /photos on her past.
Harold Kidd Input
SWANEE was certainly built as SISTER LOLA pre-October 1920, possibly by Harvey or DIck Lang. I don’t know where the Bailey & Lowe reference came in, although Bailey & Tyer did build a 33 footer (unusual dimension) just pre WW1. Lang too had built a 33 footer in 1916 and just could have used those moulds. I can’t find a direct report of her owner as SISTER LOLA but am pretty sure she’s the boat reported in the Auckland Star of 28th August 1920. If so, her hull was built professionally and she was finished off by her first owners Pavitt brothers and Verran at Bayswater. There again the Verrans were Northcote people and Bailey & Tyer were at Hall’s Beach, Northcote Point. She was sold to Arthur Sandford of Vine St., Ponsonby in late 1922, early 1923. He changed her name to SWANEE probably after the Al Jolson song “Swanee”. Sandford was, for a time, a professional Vaudeville artist and no doubt sang that song on stage. She had a 6 cylinder Studebaker car engine in 1925. Sandford sold her to Alfred McLeod some time between 1934 and 1939. McLeod joined the Squadron with her in 1939. She then had a 30hp Hercules engine which he replaced with a 100hp Meadows ohv 6 in 1947/8 (probably a war-surplus engine). The rest of her history on the Kaipara is well-known. There’s a big dose of conjecture in the above. I’ll check with the Verran family.
Update 30-08-2015
B/W photo added above ex Ian Miller whose wife Rosalind’s late father, Doug Hazard, crewed on Swanee in the 1930’s
Update 06-03-2023 – photo below ex Kauri museum, Matakohe via Diane Wilkinson fb
TE HONU photos & info ex Bruce Dickie & Ken Ricketts. edited by Alan H
Te Honu was built by Brin Wilson in 1963 & is 34′ x 10′ 6″. Her first owners were a family by the name of ‘Tuttle’ or ‘Turtle’ according to one of her current owners, Bruce Dickie, Bob believes they were in the cartage business in the Takapuna area, She would have been one of the last boats Brin Wilson built in Porana Rd Glenfield.
She is presently owned by father & son team of boat builder Bruce & his son Logan, they bought her in February 2015 off a Mark Wilson, who had apparently owned her for approximately the last 15 years & had kept her at Pine Harbour. Home is now Gulf Harbour & she has been hauled out in the Brin Wilson shed for the last few months for a ‘makeover at the hands of Bruce & Logan, assisted by a number of members of their family.
She is stall largely original except for the flying bridge which Bruce is working at improving the aesthetics of during the refurb 🙂 She is still powered by the original 100 HP 6 cyl. Lees converted Ford diesel.
We look forward to seeing her back in the the water later in the year.
Harold Kidd Input
According to APYMBA records, TE HONU was built by Brin Wilson in 1961 for K S Turtill & Sons with a 6 cylinder Ford. She was 34’x32’x10’2″x3’6″. Later owners included well-known Accountant Jack Anderson of Blomfield Spa, Takapuna (1973).
The full ownership was recorded as K.S., M.I., P.H. and I.S. Turtill. Ken Turtill (1914-2000) was an Army Captain in WW2 and a POW. He lived at 132 and later 258 Hurstmere Rd Takapuna around the time TE HONU was built by Brin. He was a student liaison officer at the time. Good bloke.
RONAKI photos ex Pam Cundy at the Whangateau Traditional Boat Yard
I know nothing about todays launch other than that Pam & George saw Ronaki in Ruakaka a couple of years ago. She went onto trade me and was sold. The lifebuoy has 1912 on it so maybe that’s some indication of her age. A serious case of the ugly sister going on in the last photo.
Anyone know what became of her?, fingers crossed someone took on the challenge & restored her.
Harold Kidd Input
RONAKI has a picture in our “N.Z. Vintage Launches” at page 63. She was built as a fast harbour launch by Collings & Bell for the Auckland Harbour Board in January 1913, a 38 footer powered by a big 55-75 hp H.C. Doman marine engine with a max of 14 knots. Photo below. After many years of service with AHB she was sold to G Hyauiason who had her bridgedeckerised. The RNZN took her over in 1942 for control service (at the boom, I think) but sold her in 1944 to J.A. Collins. My uncle Lou Wilson, MD of Morris Black & Matheson bought her soon after that. Lou certainly wasn’t the one who rowed over and asked for points for a V8. I really don’t know about that story, particularly where the V8 came from. The AHB bought her back subsequently and fitted a Leyland. A group of us looked at her around 1986 but bought FERRO instead, principally because we were warned off the Leyland and favoured the Caterpillar in FERRO, plus she was much more original. The other RONAKI was built as MANUKAU by Chas. Bailey & Son in 1914 for the AHB to use on the Manukau.
The photo below is from Ron Wattam & was taken during her sea trials.
waitematawoodys.com #1 for classic wooden boat stories, info, advice & news - updated daily - 15+ million views 