


POPEYE
Input & photos ex Ken Ricketts – she is 18 feet long & is powered by a small Yanmar diesel. Pictured below under going a restoration at Colin Brown’s yard.
29-08-2018 Update from Bruce Whillans




POPEYE
Input & photos ex Ken Ricketts – she is 18 feet long & is powered by a small Yanmar diesel. Pictured below under going a restoration at Colin Brown’s yard.
29-08-2018 Update from Bruce Whillans


Restoration of the 1936 X-Class dinghy Huia – X22
The photos above show her on the water in Torbay after Charles tightened up her planks and gave her a paint job.

“The Canterbury Huia was built by R. Tredennick in 1932, probably off moulds by Fred Dobby. She did little of note until Trdennick sold her around 1936 to R. Hendry and, with Fred Tissiman as skipper she won the 1939 Sander Cup at Bluff.
After 1939 she was sold to Bill Poole of Akaroa and he still owned her in 1947 racing with the Akaroa Sailing Club. My Canterbury contacts seem to recall that she was converted to a runabout.
However …. way up in Northland in 1952 an X-class boat named Huia owned by K. Bradley from Dargaville appeared at Paihia to race in the Northland Sanders Cup Trials. She was quite good and raced in Whangarei and at the northern regional regattas for the next 2-3 years. I have not seen any photos to see if she carried a sail number. Many regional yacht owners bought sails but never bothered registering.
Sea Spray Oct 1953, in mentioning the 1953 Northland trials, made a note that “Huia from Dargaville will be worth watching.”
At the Whangarei Cruising Club the X-class Huia won the Wilkinson Shield in 1953 and 1954.
Interestingly enough. The ex-Auckland yacht Tuoma (built for Bob Greenwell in 1946) in April 1952 was owned by R. Long of Taumarere, was racing at the Northland Inter-Port Yachting regatta up at Paihia.
Her sail number was X-22. She vanished soon after that 1952 regatta.
Perhaps Mr. Bradley of Dargaville got hold of Tuoma’s sails? OR… perhaps he bought Tuoma and renamed her Huia?”

Mystery Launches 18-08-2018

Lake Rotoiti Mystery Launch -1956



PREMA
Prema was built in 1965 but looks older, no mention on her trademe listing as to a designer / builder but I’m sure we can uncover that.
She measures 26’ & is kauri built. The zoom zoom is via a 48hp Perkins.
While she obviously needs some DIY repairs / maintenance, given that if her hull is sound, the asking price of $12k is a great entry point to classic wooden boat.
Home port is the Thames Marina & I just weep when I see that the rental is $30 per week.
Input from Cameron Pollard – Billy Rogers.( so we where lead to believe)
Original name was Raewyn.
We bought her from Milford marina some 25ish years ago. Very nicely built and roomy for her size.


CHARLIE
From what WW can learn from her trademe listing (thanks Ian McDonald), all we know is that Charlie was built in 1927 by the Monk Bros (?), is approx. 27’ in length & her zoom zoom is via a 60hp Ford diesel.
Charlie has had some TCL in recent times & would make a nice entry point into classic wooden boating. Current home is Omokoroa, Tauranga.
Anyone know more about her?

Mystery Woodys at Kawau Island
NOT Mullet boats but 18-foot V-class. See endless posts and publications over the last 20 years (puts hobby horse back in stable)
From what I can make of the name on her transom, the light coloured hull looks to be Vaalele, V-78, built by Charlie Hardman to a Ralph Goodwin design in 1936.She was one of the four Auckland 18-footers that travelled to Sydney for the first World’s 18-footer championship in 1938. Charlie Hardman kept Vaalele until 1939 when he sold her to S.H. Bailey.
The darker boat is a bit later and looks to be quite new. She’s marconi rigged and could possibly be another Charlie Hardman / Ralph Goodwin boat, Vindex, V-35 built in 1939. Marconi rigs were not common in the V-class but by 1939 the more competitive yachtsmen were moving away from gaff.
From other photos I have seen, she was painted a dark colour, either black or royal blue and was marconi rigged. Vindex was laid up in 1940 and In 1944 he sold Vindex to Keith Atkinson who was working at Lidgards with Hardman.
If this is the case then that would date the photo to the summer of 1939/40, with the two Hardman boats cruising in company, and also explain the patriotic display of the Union Jack from the wharf,
15-07-2018 Update from Steve Pople (current owner)
Steve sent me the 2 b/w photos below (ex NZ Herald) of RF as launched – what a stunner, just about perfect from any angle. Steve confirmed Ken Rickets comments re being lengthened (by 6′). RF is currently in the very capable hands of Dave Patterson of Leader Boats in Pakuranga undergoing a total refit. I will updated the restoration story with new photos.





ARGO – Mason Marine Clipper 26
In recent years there has been a resurgence in the restoration of the Mason Marine motor boats. Aside from being very smart craft, the ability to pop them on a trailer & take them home, cuts out the savage marina costs. Her owner has had her since 1993, in later years she was always a project to be completed but life got in the way.
Todays deep vee Clipper 26, Argo, & is for sale on trademe, she looks a little tired after sitting out in the weather for years but the bones are their. Her looks are deceiving. Her hull has been tapped her out and she sounds good. Internal wood work needs a lot of attention.
Although the Clippers originally never had a flying bridge, one was added with hydraulic steering top and bottom.
This boat comes with a 6.4 GMC Diesel motor (not converted) Volvo stern leg plus the standard bits and pieces that were on her originally.
The photos of her in her original glory are from Pete Miller’s web site. Got to love the photo from the “old times” checking for fuel leaks whilst the character n the background has his smoke.
Argo had a wide beam of 9’6” & interesting construction of strip plank cedar glassed on the exterior and ribs on the interior. Fuel consumption must have been fierce with twin 283cu inboards originally, later replaced by a 440cu Magnum 4bbl and she had a third with a 440 cu Magnum with a 6 BBL carb. But then fuel was dirt cheap in those days.
So Woodys anyone looking for a project?



