MOETAPU REGATTAS 1909 – 1919 – A REMARKABLE CLASSIC BOATING ARCHIVE

Slightly different format today that sees us featuring the Moetapu Regatta’s 1909 > 1914. Moetapu is located in Pelorus Sound, Marlborough. The story was shared with us by Roy Jones from the Picton Clinker & Classic Boat Club. Roy pulls together an amazing newsletter for the club and is one of my must read items each month.
Roy contacted WW last week following up on a WW story I ran, sourced from the clubs newsletter. At the time WW was seeking intel on an old photograph of a launch pictured at the Moetapu Regatta.
Roy commented that from a very distant source, they have determined an identity of the craft, ZEALANDIA.  Roy has cropped together (his words) a story on the Regatta’s for the clubs newsletter. And today we get to share it. Many thanks Roy 🙂

Moetapu Regatta, 26th December 1909 – 1914 – Roy Jones

Some time ago we wondered at the name of a motorised craft featured at the Moetapu Beach picnic 26th Dec 1911.

I was contacted recently by Ms Victoria Gitting, who was sent a series of photographs and albums by a relative, Mr Ian Pinkerton, who is the great great great grandson of Mr William Ross Brownlee, the Havelock timber tycoon who established Blackball.

The albums are cherished by Ian and include a selection of photographs of the early Moetapu Regatta’s from 1910 – 1914

It was delightful to see the boat flotilla’s of so many styles and of the races they ran. The photo has a date of 27th Dec 1909

Considering the date of 1909 it is remarkable the number of motorised craft even then!

Attached is the article from The Pelorus Guardian and Miners Advocate newspaper with race results for the 1911 event.

I wish we knew the race course length to enable their speed to be calculated from the time elapsed in the race.

With the wonderful Glass Plate photos, we can zoom right in close without the modern day pixilation occurring and noting the flag on the stern of the craft below, and the race results, the only craft detailed shows it as Zelandia, the only named craft with ALA in the name.

A considerable crowd attended these regatta’s a scan be seen for the crowded steam boat Pelorus, the hulk of which is still seen on the side of the road at Blackball Harbour a short distance from Havelock on the road to Nelson.

The craft that indicates ALA on the flag at her stern, suggests her name is Zealandia.

This is the Kaituna River which flows into Havelock and is now just a trickle by comparison.

I notice that Mr J.W. Brownlee owns The Weka and is both mentioned as starting badly and only finished one round yet is mentioned as Weka winning easily, maybe there is a Weka and a Waka as both are mentioned. I presume that this is Mr John Brownlee who also commissioned Ernie Lane in Picton to build our Ruru in 1920. Ruru was also was fitted with an oil engine as it motored from Picton to Havelock shortly after being completed. There are some delightful old style photographs of early Marlborough and of how the locals enjoyed their recreation, watching yacht and speedboat races.

Dressed in their finery for the day out no matter how uncomfortable it would have been in frock jackets and formal hats to long dresses & wide hats. Kids too!Very little sign of food hampers.

The steam tug Pelorus, used by the Brownlee Timber mill to tow sailing ships up the Pelorus River to Blackball.

Gosh….   that punt is crowded and not a life jacket to be seen.

The beach Promenade

A fine Club house and starters box, is it the first of the Pelorus Boating Club rooms?

This is the current condition of the steam tug Pelorus, shown earlier in the article, lying alongside the road between Havelock and Nelson. The bank of the stream behind the hull is full of the offcuts from the sawmill that existed on this site at Blackball. One can walk the steam and see the ends of countless flitches discarded from the milling process.

In a more highly populated area than Marlborough, this hulk would be restored by a larger engineering company and be a usable steam tourist attraction.

Pelorus lies about where the bowsprit of Lindstol sits in this photo.

HAROLD KIDD INPUT – There were many launches called ZEALANDIA, usually because they were fitted with a Zealandia marine engine built by Hoiland & Gillett in Auckland. Tom Le Huquet built at least two for Hoiland & Gillett and T M Lane & Sons did another for them in 1910; there was a twin-engined smart launch built at Riwaka by Arthur McNabb in 1912 (not the pictured boat at Moetapu), one in Rotorua by Robinson & McIntosh in 1909, one in Dunedin in 1910 and this one at Pelorus. There were probably others.

RESTORATION OF THE 26’ TERCEL BROS BUILT CLASSIC YACHT – ROXANE

RESTORATION OF THE 26’ TERCEL BROS BUILT CLASSIC YACHT – ROXANE

Recently WW was contacted by Ross Dawson with an update on the restoration of his brother, Keith Dawsons Tercel built 26’ yacht – ROZANE.

Before we start todays story , back in May 2018 we ran a brilliant story on Keith celebrating his 105th birthday and we were also given an insight into the 1937 voyage Keith and his mate Dick Wellington undertook sailing ROXANE from Auckland to Sydney, Australia. Link to the story below. (Keith passed away in Dec 2018)

May 2018 https://waitematawoodys.com/2018/05/13/roxane-a-105th-birthday-party/

Then in September 2024 Ross updated us on the start of the restoration of ROXANE at the hands of Ralph Finch. Link to that story below. Sept 2024 https://waitematawoodys.com/2024/09/15/restoration-of-a-new-zealand-classic-wooden-yacht-in-australia-roxane/

Now fast forward to July 2026 and Ross has shared the above photo and the note below he received from Ralph in Cairns, Australia :-

“We’ve now installed a total of 11 sister ribs on the starboard side from beside the engine and moving back towards the stern. I want to get another 2 ribs in if I can, tucked under the rear deck. It’ll be a tight squeeze.

We’ve also started steaming, bending and clamping longer sections of spotted gum to be used, 3 each side, as backing blocks for the chain plates. The original internal backing blocks for the chain plates only extended 3 planks down the sides. The new pieces we’re making will extend down a total of 7 planks thereby spreading the stress and upward pull from the mast and rig over more of the hull. We’ll use copper nails and roves to fix them in place.

I had removed a 3 meter length of the sheer strake (very top plank at deck level) on the starboard side with the intention of replacing that section with Oregon Pine. Removal of the sheer strake revealed the beam shelf, a heavy internal timber running fore-and-aft along the top of the hull which supports the deck beams. Unfortunately, the now exposed beam shelf shows a great deal of dry rot. It has been very time consuming digging out the dry rot back to a solid timber base.

As you can see in the photos, the beam shelf has a great many holes in it. We’re treating the dry rot sections with preserver and then packing west system epoxy mixed with spotted gum wood shavings as filler. If this much dry rot is in just a 3 meter length then I feel I have no choice but to remove the sheer strakes both sides and the full length of the boat. The starboard side may be the worst as this was the side of the boat that had layers and layers of wet leaves sitting for 20 odd years.

Even with the beam shelf repaired, I’m intending to strengthen it further by cutting, shaping and fixing a doubled up layer of ¾ inch thick marine ply (1.5 inch thick total) under the present beam shelf for the whole length of the boat and both port and starboard sides. Yep there’ll be a few scarf joints in all of that!! It’s impossible to remove the existing beam shelf, so all we can do is strengthen and reinforce it.

We’ve also exposed a small section of dry rot in the starboard bilge stringer.

We haven’t really started work on the port side of the boat. This restoration project seems destined to drag out for a little longer.“

CLASSIC WOODEN BRIDGE-DECKER AT LEIGH – WONDABYNE

CLASSIC WOODEN BRIDGE-DECKER AT LEIGH – WONDABYNE

Recently Tobias Forsyth located a treasure trove of old photos from the Leigh area, a mx of workboats and pleasure craft. 

Todays photo shows a bridge-decker sporting a steading sail. Vessel name unknown, the photographer is listed as Robyn Kellian.

In my eyes the classic wooden launch looks like LADY JOYCE , refer WW link https://waitematawoodys.com/2014/03/22/lady-joyce/ but I’m wrong more often than I’m right, so hopefully we can put a name to the launch.

INPUT ex NATHAN HERBERT – its WONDABYNE – SEE BELOW https://waitematawoodys.com/2022/03/02/wondabyne-pakatoa/

CLASSIC WOODEN CRAFT ON THE  HAURAKI PLAINS 

CLASSIC WOODEN CRAFT ON THE  HAURAKI PLAINS 

Todays wooden launch is named possibly named SETILER or SETTLER and we see her docked at the Kerepeehi Wharf in the Thames District. Along side her a two smaller ‘settlers’ launches that would have been used as everyday transport. Where as bigger vessel has a passenger look to her. Out of site is a 4th launch, which unfortunately we can not read the name on the bow.

In the background is a dredge that would have been engaged in the drainage of the Hauraki Plains

The photo comes to us from Darren Carr on the Kerepeehi Community fb page via Lew Redwood.

INPUT ex HAROLD KIDD – This is not the steamer SETTLER built by Charles Bailey in 1905 for the Kaipara but the SETTLER built by Harvey & Lang around 1913 for H Kirby of Thames as a passenger boat. SAMSON was built in 1911 by Bailey for T J Storey of Thames.

CLASSIC WOODEN LAUNCHES ON THE KAIPARA

SWANEE
WEONA
AVALON
UNKNOWN

CLASSIC WOODEN LAUNCHES ON THE KAIPARA

Over the weekend Travers Reynolds was mooching around the Kaipara Harbour (Pahi / Whakpirau) in his kayak and snapped the gallery of photos above.

As Travers commented there is a mix of presentation on display – some on the way out and some in fine fettle. 

Very sad to she the current condition of the launch SWANEE, she appeared on WW back in August 2015 , link below. The last decade hasn’t been kind to her, hopefully its just paint. https://waitematawoodys.com/2015/08/29/swanee/

Other woodys sighted are WEONA, AVALON and an unknown, well at least no name displayed.

HIDDEN IN PLAIN SIGHT – WELLINGTON’S CLASSIC WOODEN CRAFT

HIDDEN IN PLAIN SIGHT – WELLINGTON’S CLASSIC WOODEN CRAFT

I’m guilty of a lapse that a lot of us northern woodys fall into – that being, we forget about NZ’s capital city Wellington as a home to some of our best classic wooden craft. 

Auckland, the Bay of Islands and the top of the South Island tend to dominate WW content. So it was so good to receive a trip report from Auckland based woody Geoff Fiebig (SV CAPLIN) from Chaffers marina in Wellington.

Extra special to see that the 49’ woody VANESSA was now in her new home and looking very salty. VANESSA was Geoff’s reason for the trip, hopefully we can get an insight into the project he has been commissioned to undertake. If you missed her story on WW when she was 4sale with the Wooden Boat Bureau, check out this link https://waitematawoodys.com/2024/10/23/ready-to-unwind-this-summer-classic-motorboat-vanessa-ticks-all-the-boxes/

The next woody is the 26’ 1925 Colin Wild built launch – LITTLE TASMAN, another woody that slipped thru our hands and headed south. Not before an amazing restoration at the hands of Colin Brown and Josh Hawkw at their Omaha yard. Check out this WW link and view the video of the project. https://waitematawoodys.com/2022/06/17/little-tasman-restoration/

Lastly we have the 1964 Ben Hipkins built  50’ bridge decker – RANGIORA looking the best she has in a long time – well done to her owners.

RANGIORA has had an interesting life , check out this 2022 WW story that backgrounds her partial sinking in1973 after hitting rocks off the northern coast of Waiheke Island, Auckland. https://waitematawoodys.com/2023/01/04/rangiora-sinks-off-waiheke-21-09-1973/

WOODYS ON TOUR – THE FRENCH RIVIERA

WOODYS ON TOUR – THE FRENCH RIVIERA

As we enter mid-winter I thought an injection of sun and sapphire blue water might be appropriate. 

Yesterday Maurice Bryham, owner of the classic woody – IONA II sent in todays gallery of photos from  Côte d’Azur (southwest corner of France)

Maurice commented – ‘some wooden boat photos from Villefranche-sur-Mer on the Med. Great to see so many wooden boats being well looked after.  Still some traditional boat yards too.  

The wooden fishing boats are still in good use.  The brother and sister caught those fish at 7am-8am with their dad and then selling them on the foreshore at 9am with their boat in the background.

30C, sunny every day and crystal clear water’

CLASSIC LAUNCHES AT GREAT BARRIER ISLAND

CLASSIC LAUNCHES AT GREAT BARRIER ISLAND

Todays woody photo comes to us from Gt Barrier Island fb via Ian McDonald. Ian commented that the photo was captioned ‘ Nagle Cove, Great Barrier, 1960’s’.

Obviously the uber cool game boat LADY DOREEN is front and centre, can we ID the launch behind her, very distinctive windows / ports configuration.

The photo looks slightly familiar but I can not find it on WW, the presence of the ‘NZ Tourist Air Travel’ flying boat is probably playing games with my memory. 

MYSTERY 1965 COROMANDEL LAUNCH – LADY WINN

MYSTERY 1965 COROMANDEL LAUNCH – LADY WINN

Earlier in the week todays photo popped up on the ’Timespanner’ page and comes to us via . The comment was that the photo was from Graeme Macdonald and captioned ‘ Boats of Coromandel Harbour, July 1965’, and was taken by Pat A Macdonald.

The centre vessel is quite a beast, very beamy. Doesn’t look like a commercial craft – can we ID her.

INPUT FROM RUSSELL WARD & HAROLD KIDD – the launch is Sam Strongman’s LADY WINN

Nice to see the cold snap has not stopped some woodys from enjoying their craft – photos below of FELICITARIE and SUSAN JANE in Oneroa, Waiheke Island. Photos ex Angus Rogers from onboard CENTAURUS,

CLASSIC WORKBOAT VANGUARD – A WATERFRONT APARTMENT FOR $2.50

CLASSIC WORKBOAT VANGUARD – A WATERFRONT APARTMENT FOR $2.50

First up that isn’t a typo in the headline – todays woody is for sale and the current bid is $2.50 and the reserve has been met……….

Two option here, buy her as a live aboard or as a project to end up with a very fine workboat conversion.

What we know about VANGUARD –

• Built in 1947 by Lidgard’s

• 50’ in length with either double or triple skinned hull

• Powered by a GM V8.

• Was in survey up to May 2025.

• Located currently in Pelorus Sound.

(thanks Ian McDonald for the tme heads up)