Category Archives: Non Waitemata

Pania

Posted on by
5

Screen Shot 2017-05-04 at 4.33.33 PM

Screen Shot 2017-05-04 at 4.33.55 PM

PANIA
Pania has had the same owners for over 25 years. She was built in 1973 using triple planked mahogany.
The get up & go comes from twin 90hp 6LW Gardeners & she measures approx. 50′.
She looks a very sea worthy vessel, no doubt one of the reasons her home port is Bluff, Southland.
Thanks to Ian McDonald for the trademe listing heads up 🙂

Can we expand on her details e.g. designer / builder & where was she from 1973 > early 1990’s ?

Input from Dick Hall

‘Pania’ was built by Jack Morgan for Rex Baldick of Picton off the extended ‘Hawaiki’ design. She was launched with a single Allis-Chalmers diesel that came out of a local fishing-boat but later when back to Jack and converted to twin screw with two four cylinder Fords. You can see the original strut with shaft hole through it in underwater photo. Rex had the Baldick families ‘Prima-Donna’ before building ‘Pania’

SIERRA 100th BIRTHDAY DAY

Sierra was designed and built by Joseph Fell of Kohukohu (Hokianga Harbour) & launched 3 May 1917. If she was a human, Sierra would be getting a letter from the Queen – as the old girl has just celebrated her 100th birthday. Owner Dennis Christopher is having a wee party for her this Sunday at  the Panmure Motor Boat & Yacht Club, 104 Kings Rd, Panmure.
Sierra will be alongside the jetty from 2.00pm on-wards. It’s a just drop-in event & any one is welcome. So woodys, if you are out & about on Sunday, call by. (photo below ex Tom Kane).

Screen Shot 2017-05-04 at 8.59.40 PM

Highland Lass

Posted on by
7

Te papa 1950s, by Eric Lee-Johnson Whangarei basin

Highland Lass

The launch in the centre of the above photo (by Eric Lee-Johnson & ex Te Papa) appears to be berthed in the Whangarei Basin. Nathan Herbert sent it in to ww & all we know is that the photo is dated c.1950’s.

So woodys – does any one recognize the boat ?

Update 15-05-2015 Thanks to Harold Kidd & Nathan Herbert we now know she was built by Dick Hartley in 1949 & is named ‘Highland Lass’

Sanson

Posted on by
4

Screen Shot 2017-05-02 at 4.50.06 PM

Screen Shot 2017-05-02 at 4.51.31 PM

Screen Shot 2017-05-02 at 4.51.16 PM


SANSON

Sanson was built in 1951 by Shipbuilders & is a carvel planked semi-displacement classic launch, approx. 25′ in length. Zoom zoom comes from a 2 cylinder 25hp Shibaru Ford diesel engine.

That is about all I know about her, can any woodys (Northland based – she lives near Dove Cove) help out with more details?

Alden Ketch – Sailing Sunday

Posted on by
23

Screen Shot 2017-04-29 at 1.27.58 PM

ALDEN KETCH – Sailing Sunday

We do not see a lot of John Alden designed classic’s in NZ which given they are almost always very pretty vessels, isn’t good.
This one was design #550 & was built in 1939 by Arnold France in Lyttleton & has been lovingly restored by her current owner.
She is 39.35′ & built with full length 1 1/4″ oregon on hardwood frames. Her when the sails aren’t up a 2012 Nissan TD27 88hp diesel pushes her along.
She was re-rigged in Her refurbishment included being rewired, new switches / breaker panels, batteries, instruments, electric toilet and holding tank, new plumbing throughout. Plus new squabs and many other extras, complete hull paint before Christmas.
She is for sale on trademe – a very smart classic & a lot of boat for the asking price of $65k ono

02-04-2017 Updates from Robin Elliott
She is Windswift and was registered as A-8 with Banks Peninsular Cruising Club, She was a 3 year building project by Arnold France.
France probably started building her in 1939 but she wasn’t launched until October 1941. He and his wife and son lived aboard for 3 years during the War.
Seems to have grown a little over the years. Reported as 35-feet when launched, Arnold France gave dims of  “33ft 8in x 10ft 6in x 4ft 8in” in 1949, In December 1956 she was advertised for sale as being 34-feet. She was on Trade Me in 2008 as 41-feet, and now as 39.35ft. Tricky things these Alden ketches.

Here’s a little bit more, courtesy of Papers Past
https://paperspast.natlib.govt.nz/newspapers/CHP19411030.2.63?query=arnold%20france
https://paperspast.natlib.govt.nz/newspapers/LWM19460509.2.22?query=arnold%20france

Yvonne

Posted on by
2

Screen Shot 2017-04-26 at 7.23.01 PM

Screen Shot 2017-04-26 at 7.23.46 PM

YVONNE

The 38′ classic launch Yvonne was built in 1954 by Swanson in the Marlborough Sounds. She is a very distinctive design & with a 160hp Isuzu diesel she must left her skirt & really get up & go. Based in the Sounds & after 22 years of ownership, Yvonne is now ready for a new owner. Thx to Ian McDonald for the trademe heads up 🙂

Anyone able to supply more details on her?

Input from John Wicks
“Very “avante garde” styling for the time – and still looking good!!!
Bob Swanson built her at Blackwood Bay, Queen Charlotte Sound, for Jack Thompson, a farmer out Ward way, who kept her for many years – could be she’s only had 2 owners? Jack named after his wife, Yvonne, a very gracious lady.
Can’t remember what her original engine was, but I do recall Jack talking about the possibility of putting in a small gas turbine. At the time there were experiments overseas with these, but I don’t know how serious he was.
Jack was a friend of my father’s (Sorry Alan) and when the first Picton marina was built they moved into adjacent berths. IIRC this involved a certain amount of the testing of water purifying fluids.”

05-05-2017 – A Peek Down Below
Thanks to the photos below ex Jo Utting (owners family) via Ken Ricketts we get a glimpse of what must be her original  interior.

Seacraft Woodys

Posted on by
1

054

058

052

001

003

SEACRAFT WOODYS

I was recently contacted by Chris Laird & his first words were “are you guys interested in small woodys?”. My answer was ‘if its wood, its good’ 🙂

The above photographs show two dinghies that Chris restored  a couple of years ago. The 12ft 6in Seacraft Tuna has been stripped back and had new rib sections, one or two splines to cracked planks, seats, foredeck trim and beltings before being painted up to original Seacraft colours with original badging.

The varnished 12’6″ Brin Wilson has been stripped back, seats  etc removed, some rib sections scarfed in, several splines to cracked planks and varnished / painted up to original colours.
Chris commented that it is a lovely boat to row.

Also included are photos of a 6hp Norman and original cone clutch that is in a 16′ Seacraft cabin boat that Chris is currently rebuilding. I have asked Chris to send in photos of that project.

OOPS THAT IS EMBARRASSING
Over the Anzac weekend a lot of the classic fleet headed north to Kawau Island. Anchoring room near the Kawau Boating Club is always at a premium on long weekends & no one likes a long row in the dark……….. but even the old salts can get it wrong – the crew on the  1905, Logan Bros, ex pilot boat ‘Ferro’ must have been in a hurry to make the KBC as they anchored rather close in. As it turned out, too close in – the below photo was 1/2hr before low tide & mid Sunday morning – would have been a long / embarrassing day waiting for the tide 😉

Ferro @ Kawau April2017

Mahurangi Regatta – Sailing Sunday

Posted on by
3

_MG_6618

_MG_6609

_MG_6604

_MG_6571

_MG_6730

_MG_6499

Mahurangi Regatta – Sailing Sunday

I was sent a great collection of photos form the 2017 Mahurangi Regatta by Bernie Power who was aboard Shane Anderson’s classic launch Waimiga. Lots & lots of great photos, above is just a selection of the yachts, which I tend to miss as I’m pointing my camera at the beautiful boats i.e. the classic launches 🙂
Enjoy.

Primadonna

Posted on by
11

Screen Shot 2017-04-13 at 8.27.30 AM

PRIMADONNA

Primadonna is a 36′, 1905 whale chaser built by Lanes for a family with a farm in Tory Channel. Was used as a whale chaser until the end of the whaling era and then became a farm transportation boat for the same family who owned her till her current owner bought her.

She is built out of double diagonal kauri and powered with a 72hp Ford. Cruises at about 8 0r 9 knots at 1500 revs. She has accommodation for 2 and a small wheel house which you can steer from inside of the weather goes bad. Currently 4sale on trademe- thanks to Ian McDonald for the heads up.

Harold Kidd Input
There’s a bit of manufactured history here. Ernie Lane didn’t come to Picton until 1907 and doesn’t appear to have built PRIMA DONNA. Most authorities say she was built by Alf Baldick between 1910 and 1915 for himself and Derbyshire as a whalechaser to compete with the Peranos. She remained in the ownership of the Baldick family until at least 2001.
She’s been on WW before; see https://waitematawoodys.com/2017/02/27/welly-woodys/

PS the “second generation” of whalechasers used by the Baldicks were SUSSEX and PEERLESS, in competition with the Peranos’ CRESCENT, BALAENA and CACHALOT. Ernie Lane built SUSSEX and PEERLESS for the Baldicks in 1916. Lane built the Peranos’ CRESCENT and BALAENA but CACHALOT was built in 1916 to a design by Chas. Collings by Kensitt at Picton. She was the THIRD generation of whalechaser and had a 130/150 hp Van Blerck, typical Collings’ concave-convex hard chine planing hull.

Update 24-05-2020 photos below added ex trademe listing

Screen Shot 2020-05-24 at 11.38.38 AM

Screen Shot 2020-05-24 at 11.38.54 AM

Woody On Tour – Havelock Marina

Posted on by
20

20170411_111030
20170411_111441

Woody On Tour

Ross Dawson sent in the above collection of woodys from the Havelock Marina. In Ross’s words he is “currently touring around the Mainland, and taking any opportunity (when Mrs Tourist is otherwise distracted) to mooch about marinas and wharves to take pics of ‘interesting’ wooden boats.”
Great to see Gleniffer again – click link to see/read more about her, particularly Harold Kidd’s comments https://waitematawoodys.com/2013/04/11/glenifer/#comments.
Can we ID > provide more details on any of the other boats?

Home Wanted – Seacraft Run-about

Posted on by
3

P1210205

P1210202

Home Needed – Seacraft Run-about

While out & about Mori Flapan came across the interesting small clinker runabout above, in a café at Rawene in Northland.

It is 12.4′ long and has a steering wheel marked ‘Seacraft Ltd, Auckland’. The history of the Sea Craft Ltd company can be found at http://www.mmsc.co.nz/history Makes for some interesting reading, particularly Yeoman Lionel Sands’ story, and the introduction of fibreglass.

The boat originally was an inboard, but the engine has been removed and transom cut to mount an outboard. However, a rudder with the boat looks like it might have been original.

The café owner told Mori that she is looking to dispose of the boat in the near future. She has had plenty of offers from locals to take the boat and use it as a garden ornament filled with soil and plants, but she hopes that the boat might have a better fate.

If there is anyone interested in the boat, contact Mori at mflapan@gmail.com & he will pass details on to the cafe.