Ondine 004

Ondine 011

Thursdays story on Almda (Almida?) prompted Alastair Scott to send in details on another Jack Cropp woody. Alastair’s family owned Ondine for 57 years until he sold her to a new home in Wellington in 2017. The gallery of photos below the many propulsion configurations Ondine went thru. The photos also to me demonstrate how varnish can ‘lift’ a boat to another level of WoW factor 🙂 
I’ll let Alastair tell the family story:
“Jack built Ondine for my father – Laurie Scott  – in 1959. The construction consisted on long lengths of 1.1/2” cedar strips that were shaped over an internal frame that was removed when the hull was complete . These cedar strip incorporated a bevel and these were glued and nailed together with copper nails every 4”. This  method of construction produced some lovely lines along with the tumblehome shape at the transom. 
Whilst Ondine was used extensively in Akaroa harbour and the Marlborough Sounds over holiday periods, she has had an assortment of power units over the years.  Initially it was a pair of 30HP Evinrudes, then a pair of 35HP Gale outboards, then a Volvo 120HP inboard/outboard unit and lastly a single Honda 75 HP outboard. The Volvo was the most successful but we lost a lot of internal space thus the appeal of the outboards. Ondine was a very safe boat and one that would plane easily. My father always reckoned she was at her best when one of the kids sat on the edge of the bow at speed. Probably not a good H & S example in today’s PC world.”
Screen Shot 2018-12-01 at 4.22.03 AM
Screen Shot 2018-12-01 at 4.22.23 AM
Screen Shot 2018-12-01 at 4.22.34 AM

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s