Mahanui

IMG_0232

IMG_0833

 

IMG_2968IMG_2984

P1060928

P1060932

IMG_0829

Mahanui

It’s not often that boats the size and condition of Mahanui come on the market – normally they get offered for sale at a stage in their life cycle when both them and their owner are at the end of a long relationship and the vessel is showing its age. The status of Mahanui is what I would call ’surplus to needs’ – out of the blue, her owners made the decision to buy a bigger boat, suited to extended family cruising, so woodys – Mahanui is on the market.

She presents in pristine condition – her owner is one of your most fanatical owners. Only the best wooden boat trades people have worked on her and everything is the best of the best. Built in 1977 by Keith Atkinson, designed by Raymond C Hunt, Mahanui is 42’ long, has a beam of 12’4” and draws approx.. 3’. As originally launched she was named Jacinta II and was several feet shorter in length. Mahanui is hard chine kauri plywood, glassed over hull and top sides. Her first owner was Trevor Lindsay and he owner her for 25 years. Several owners later she had undergone a name change to Mahanui and received some ‘cosmetic’ work to her length, stern and flybridge.

Fast forward to 2012 and the current owners purchased Mahanui and set about correcting the defects the pre-purchase survey had revealed. This work was undertaken by one of the best woody boatbuilding yards in NZ – Greg Lees Boatbuilders – Sandspit.  On the way to Sandspit one of the original motors (BMC 98’s) blew its fuel pump and closer examination of the motors indicated the owner either had to spend a lot of money on reconditioning very old motors or bite the bullet and replace them. They replaced them with twin Perkins Sabre M135’s with Newage PRM gear boxes.  She was in the shed at Sandspit for almost 9 months and during that time the hull was dried out, treated inside and then white gel coated, new exhausts fitted, new fuel and water hoses and filters, completely rewired, new BEP switchboard, LED lights throughout, faulty instruments replaced, complete overhaul of refrigeration, new batteries, re-splining and strengthening coamings, all chromed brass removed and redone, bowsprit and anchoring system upgraded, all deck rails removed and refastened, new controls and cables, new skin fittings, other wood work, most of the internal panelling replaced, flybridge interior completely re-furbished, coamings back to bare wood and Uroxsys varnished, topsides and flybridge repainted, hull taken back to glass re-epoxied and new anti-foul, new electronics and autopilot. View more here

Mahanui (Jacinta II)

Fast forward again to 2016 and her owners had booked Mahanui into Greg Lees yard again, this time for a wee facelift.  The canopy over Mahanui’s cockpit was replaced with a permanent structure and in my WW eyes the finished article is a perfect look and fit.

Read details & view photos of the work undertaken at this link https://waitematawoodys.com/2016/10/25/23212/

In 2018 her decks were redone and glassed + re Uroxsys coamings. As an added bonus her owners fitted a silicon anti-foul wrap which has a 5 year (from fit date) warranty.

Full details on specs are available to interested parties but in a nutshell – cruising speed is 13 knots with a max of 16 knots.

Mahanui is offered as a hop board and go boating vessel – a snapshot of her package includes – dinghy, outboard, cockpit table and chairs, fenders, cutlery, pots, pans, glassware, tools (particular to the vessel), almost a spare of everything, cushions etc etc.

In the first instance – enquires to waitematawoodys@gmail.com (SOLD)

P1060966

WBB0003_Banner-980x160

5 thoughts on “Mahanui

  1. Pingback: Mahanui Gets A Refit And Is OFS | waitematawoodys.com #1 for classic wooden boat stories, info, advice & news – updated daily

  2. Pingback: Labour Weekend Woody Cruise | waitematawoodys.com #1 for classic wooden boat stories, info, advice & news – updated daily

Leave a comment